+1 on the relief valve I bought my current cast iron 2 stage for $25 cause the motor was blowing the breaker and guy thought compressor was bad. I brought it home cleaned a booger out of the relief valve keeping it from opening and its been fine ever since that was over 10 years ago.
As was said before the motor should be spun up before the relief valve pushes open to fill the tank
Switch to 220-240 ...doubling the voltage halves the current ...so thinner wires longer runs etc.
As was said before the motor should be spun up before the relief valve pushes open to fill the tank
Switch to 220-240 ...doubling the voltage halves the current ...so thinner wires longer runs etc.
Last edited: