This is on our New Holland LM435A telehandler. It has an Iveco 4 cylinder 275 cu. in engine. It is used for odd jobs all over the farm but right now it gets most of its hours feeding round bales into our bale grinder. I have listings for the last two oil changes. Using Service Pro 15w-40 oil. The recommended OCI is 600 hours.
Hours 3904, 4744
OCI 716, 840
Iron 33, 25
Chrm 3, 2
Alum 6, 4
Copp 48, 7
Lead 2, 3
Sili 13, 6
Sod 2, 3
Pot 3, 0
Moly 163, 97
Bor 13, 14
Mag 951, 870
Calc 1432, 1391
Phos 1026, 996
Zinc 1244, 1203
Fuel Soot .1%, .1%
Water Viscst 14, 14.5
TBN 5.96, 6.06
Oxid 11, 12
Nit 15, 16
I thought the high copper from the earlier oil change might have been from an issue with the oil cooler but it didn't seem to be an issue on the second oil change. I think I might try and go past a 1000 hours for the next OCI.
Hours 3904, 4744
OCI 716, 840
Iron 33, 25
Chrm 3, 2
Alum 6, 4
Copp 48, 7
Lead 2, 3
Sili 13, 6
Sod 2, 3
Pot 3, 0
Moly 163, 97
Bor 13, 14
Mag 951, 870
Calc 1432, 1391
Phos 1026, 996
Zinc 1244, 1203
Fuel Soot .1%, .1%
Water Viscst 14, 14.5
TBN 5.96, 6.06
Oxid 11, 12
Nit 15, 16
I thought the high copper from the earlier oil change might have been from an issue with the oil cooler but it didn't seem to be an issue on the second oil change. I think I might try and go past a 1000 hours for the next OCI.