2004 Toyota Sequoia SR5 4x4
I'm getting a no crank, no start after an engine replacement. All connections are plugged in.
I'm using the original harness from my vehicle. Every connector had a connection on new engine.
All lights come on dash, headlights and power windows, ect working fine. Battery is fully charged and engine ground is tight.
I've checked every fuse and swapped out one starter relay and checked the other with a meter.
I confirmed the neutral switch on transmission is plugged in and selector is all the way back in park.
Wiggling the shifter and trying in neutral has not worked.
Apply 12v to the starter solenoid and the starter engages.
Jumping the starter with key in run position, I do not have any spark, but I do have pressurized fuel in the fuel rail.
I'm using 2 different correct old keys.
Needing some suggestions
I'm getting a no crank, no start after an engine replacement. All connections are plugged in.
I'm using the original harness from my vehicle. Every connector had a connection on new engine.
All lights come on dash, headlights and power windows, ect working fine. Battery is fully charged and engine ground is tight.
I've checked every fuse and swapped out one starter relay and checked the other with a meter.
I confirmed the neutral switch on transmission is plugged in and selector is all the way back in park.
Wiggling the shifter and trying in neutral has not worked.
Apply 12v to the starter solenoid and the starter engages.
Jumping the starter with key in run position, I do not have any spark, but I do have pressurized fuel in the fuel rail.
I'm using 2 different correct old keys.
Needing some suggestions