Search results

My chainsaw has the primer bulb mounted in the gas tank, has anyone every seen this? I can't find a replacement cap anywhere, anyone have an idea where I could locate a part like this? or could I just mount a remote bulb and seal off the hole in the gas lid? thanks

same here Joe, never had an engine failure.

I'm guessing here, Cinder Blocks are not to be used? lol

Originally Posted By: mechtech2 The little retainer on the coupler probably was sharp, or in combination with a malformed spot on the zerk. Try twisting to a new location, and have your wife pull on it. ouch!!

http://racecarstuff.com/?page_id=2 this link should explain how to diy. good luck

success, moved fine. Used all your suggestions Onion. That system takes 250 psi and has a relief valve to protect from over pressure. Thanks again for all replies.

Thanks guys, Onion the dealer said use the port-a-power method, or a more dangerous way was disconnect the driveshafts at both ends of the tranny, since we had the front shaft out already checking a locked up engine, we'll just drop the rear one and away we go( I hope) Thanks again.

hatetowork, thanks for the reply. we'll have to move it 1.9 miles on what is basicly and skidder road, it has hydraulic wet-disc brakes that auto lock with a loss of pressure. We'll contact the dealer today for the answer, wanted to get it moved this weeekend, but that didn't happen. thanks again.

I've look everywhere, maybe someone here knows. 640g skidder with blown up engine, we need to release the brakes to move it for repair. This machine has hydraulic wet disc brakes, any ideas? Thanks in advance.

wow thanks

thanks guys for all the advice, and yes it is an 08 model, or what ever was last year. well off to pull seat.

I going to remove and clean the front seat in my wife's gran prix, it's manual operated but does have an air bag sensor. Any suggestion on how to handle this, sure don't want to set off air bag. oh removing the seat because of cat urine, we tried about everything else. Thanks in advance for any...

Hi, looks like I might have to change one out for my niece, anyone have any idea of what kind of job it is? any hints? probably start it this weekend? thanks

Thanks Rat, I knew I could count on somebody on this site to help. Thanks again and have a good one.

The speedometer on this 2004 2500 series doesn't work, we changed speed sensor, what else should we try? Thanks for any suggestions.

well the truck is running, bad key, punisher you hit the nail on the head. Cost was about $400 including tow and replacement of bad switch for the emergency flashers. Thanks again for the help

update: Seems to be something in the security system, the light flashed when trying to start. He's decided to have in hauled to the stealership. Thanks for the input.

ok, I'll see what the ck engine/service light is doing and post back, it may be a little while, He's gone to bid on a job. Thanks punisher.

Thanks MrCritical, it won't hit a lick, may be something in the timing. thanks again for the reply.