Search results

I've got a Ryobi 21", 40 volt mower. Gotta admit, I'm impressed. my yard takes an hour to mow - perhaps 10 mins longer with this one (the self-propel is not as fast as my Toro/Honda). It is certainly quieter than a gas mower. It takes both batteries to complete the yard.

I agree - it appears that the rear differential is 75W90 gear lube.

It's a relative's car. It's far away I don't know the service history. She has always taken it to the Toyota dealer for EVERYTHING - except the first few shop visits for this brake problem - because she was afraid to drive it very far.

No loss of fluid. One shop said "all is well". 2nd shop replaced rear disc brakes and rotors. (this would not cause intermittant brake failure) The Toyota dealer wants to replace the front pads - they're at 50%. Once again, this wont cause failure. The last incident driver was pulling into a...

I'm guessing the M/C, or user error. I'm more inclined to think it's the MC. The Toyota dealer is "refusing" to replace it. ?!?!?!?! They say this one is working and they've never replaced one. I say that the risk is too great. And what's the harm of replacing the MC? I would have replaced it...

4 instances of brake failure in the last 3 months. Pedal goes to the floor with no braking. 2009 RAV4. Three different shops have looked at the car - each one reporting that all is good. Currently it's at a Toyota dealer. I have two theories - but I'll hold off until some people weigh in. Unless...

There are some tech details on the VW 1.5 on motor reviewer. While it's alot like the 1.4, it's a fun read. Can't go wrong with a Camry - albeit mine was a 2001 and very boring.

HF should be fine for your application. I sometimes notice that cheap tubes are easy to damage when installing. (at least for me) However, I only use Michelin tubes ($90) on airplanes...

I put my son's 2010 Escape up on blocks for the winter. The suspension back there has limited lift points, so I let the suspension hang. I wont do that again! The car now has a vibration above 50 since the rubber bearing support is deformed. Ok, I fixed the problem already - but look out!

I've used Bosch quietcast pads several times. I'm happy with them and recommend them.

A couple months back I asked the group which flavor of ATF to use in my 2018 Jetta auto trans code QPA. Most stated that it should use LV fluid, like the VW fluid with the part number ending in 540. After going to two different dealers, and one online store, with my VIN, they indicated that I...

I just did the first oil change on our Crosstrek - so this caught my interest. I did notice that the original oil filter was completely empty when I removed it.

Just search Subaru TSB 02-191-22. I would have attached it but I'm not up to date on any rules regarding attachments.

Supposedly Subaru is having difficulty stocking certain oil filters and lists substitutes in TSB 02-191-22 If you use the substitute filter, they recommend that you: 1) Change the oil but not the filter 2) Rev the engine several times 3) Change the oil again and this time the filter What are...

Thank you all !

It has been challenging to figure out which fluid to use. I know it's an Aisin 09G 6 speed with the transmission code QPA. One of the Euro parts websites says they don't have anything. Another recommends their version of a T-IV fluid (although their website says its only for trans code (SCY)...

The unit is older and has had many years for the head to glue itself together. so far we tried PB blaster, the "rope trick" (filling the cylinder with rope and using the starter to pop it off - this didn't work), various hammers, prying tools. We have to clean out bird seed from the engine. (I...

My brother Just had to replace his Honda. Anyway, had to pay MSRP

I recommend Eastwood. I've got an Eastwood TIG and an Eastwood plasma. both work very well. Use them alot.

I've used a Porter Cable for years. Upgraded to a Torq and a Griots G9. While its not a Flex Or a Rupes, the Griots review very well in their class and have a lifetime warranty