Spicer recommends that the following requirements be met for any lubricant that will be used to service most vehicular, industrial and all auxiliary driveshaft applications.
• Use a good quality E. P. (extreme pressure) grease
• Timkin Test Load - 50 Lbs./23 Kg. minimum
• Meeting N.L.G.I.,* E. P., Grade 2 specifications
• Grease must have an operating range of
+325°F to -10°F (+163°C to -23°C)
Been looking at product specs lately and noticed alot of Ep rated grease stating good for ujoints
that does not meet the timkin load.
• Use a good quality E. P. (extreme pressure) grease
• Timkin Test Load - 50 Lbs./23 Kg. minimum
• Meeting N.L.G.I.,* E. P., Grade 2 specifications
• Grease must have an operating range of
+325°F to -10°F (+163°C to -23°C)
Been looking at product specs lately and noticed alot of Ep rated grease stating good for ujoints
that does not meet the timkin load.