I drained the radiator, and ran water through it a couple times no issues.
I closed the drain valve and started pouring coolant into the reservoir just like I did with the water, assuming it would start filling the radiator, but the reservoir filled up with less than half a quart and nothing will get it to go into the radiator.
Almost 1.5 gallons of coolant came out of the system, I doubt 0.5 quarts topped it off.
I ran the engine and it's reached operating temperature but the fluid level is not dropping in the reservoir. The coolant lines are still squishy with no coolant in them, and they are still cold after 30 minutes of running.
I closed the drain valve and started pouring coolant into the reservoir just like I did with the water, assuming it would start filling the radiator, but the reservoir filled up with less than half a quart and nothing will get it to go into the radiator.
Almost 1.5 gallons of coolant came out of the system, I doubt 0.5 quarts topped it off.
I ran the engine and it's reached operating temperature but the fluid level is not dropping in the reservoir. The coolant lines are still squishy with no coolant in them, and they are still cold after 30 minutes of running.