Oversize filter application for 01 Toyota 4x4 2.7L
- Thread starter TheBus36
- Start date
- Status
If its the same as the 3.4L i use the Mobil One 209 or the Amsoil EAO 34.
I'm not familiar with the 2.7L engine. Is it also similar to the 4.7L V-8 2UZ-FE engine?
- Joined
- Sep 28, 2002
- Messages
- 39,799
Here's your stock filter size in Wix. You have a 3/4-16 thread, a 2.7s/2.4x gasket (the majority are 2.8x/2.4x), and a generic bypass valve setting. The rest is physical can diameter and length.
Part Number: 51348
UPC Number: 765809513488
Principal Application: Various Chrysler/Jeep (82-08), Various GM, Saturn (85-07), Lexus (90-08), Saab (67-08), Suzuki (86-02), Toyota (88-08), Yugo (86-89), Harley-Davidson, Various Lawn&Garden, Farm Equip.
All Applications
Style: Spin-On Lube Filter
Service: Lube
Type: Full Flow
Media: Paper
Height: 3.404
Outer Diameter Top: 2.921
Outer Diameter Bottom: Closed
Thread Size: 3/4-16
By-Pass Valve Setting-PSI: 8-11
Anti-Drain Back Valve: Yes
Beta Ratio: 2/20=21/37
Burst Pressure-PSI: 275
Max Flow Rate: 7-9 GPM
Nominal Micron Rating: 19
Gasket Diameters
Number O.D. I.D. Thk.
Attached 2.734 2.430 0.226
You diameter is 3.0+/-" (though 2.9x" is an important distinction from 3.0=/+ in some lines.
If you have no restrictions on diameter or length, there are litereally (up to) 40+ options in various offerings.
FL400S would be a longer alternative.
(in wix)
Part Number: 51516
UPC Number: 765809515161
Principal Application: Ford/Lincoln/Mercury (81-08), Chrysler/Jeep (02-08), Mazda Trucks (94-07)
All Applications
Style: Spin-On Lube Filter
Service: Lube
Type: Full Flow
Media: Paper
Height: 4.828
Outer Diameter Top: 2.921
Outer Diameter Bottom: Closed
Thread Size: 3/4-16
By-Pass Valve Setting-PSI: 8-11
Anti-Drain Back Valve: Yes
Beta Ratio: 2/20=14/31
Burst Pressure-PSI: 275
Max Flow Rate: 7-9 GPM
Nominal Micron Rating: 20
Gasket Diameters
Number O.D. I.D. Thk.
Attached 2.734 2.430 0.226
Part Number: 51348
UPC Number: 765809513488
Principal Application: Various Chrysler/Jeep (82-08), Various GM, Saturn (85-07), Lexus (90-08), Saab (67-08), Suzuki (86-02), Toyota (88-08), Yugo (86-89), Harley-Davidson, Various Lawn&Garden, Farm Equip.
All Applications
Style: Spin-On Lube Filter
Service: Lube
Type: Full Flow
Media: Paper
Height: 3.404
Outer Diameter Top: 2.921
Outer Diameter Bottom: Closed
Thread Size: 3/4-16
By-Pass Valve Setting-PSI: 8-11
Anti-Drain Back Valve: Yes
Beta Ratio: 2/20=21/37
Burst Pressure-PSI: 275
Max Flow Rate: 7-9 GPM
Nominal Micron Rating: 19
Gasket Diameters
Number O.D. I.D. Thk.
Attached 2.734 2.430 0.226
You diameter is 3.0+/-" (though 2.9x" is an important distinction from 3.0=/+ in some lines.
If you have no restrictions on diameter or length, there are litereally (up to) 40+ options in various offerings.
FL400S would be a longer alternative.
(in wix)
Part Number: 51516
UPC Number: 765809515161
Principal Application: Ford/Lincoln/Mercury (81-08), Chrysler/Jeep (02-08), Mazda Trucks (94-07)
All Applications
Style: Spin-On Lube Filter
Service: Lube
Type: Full Flow
Media: Paper
Height: 4.828
Outer Diameter Top: 2.921
Outer Diameter Bottom: Closed
Thread Size: 3/4-16
By-Pass Valve Setting-PSI: 8-11
Anti-Drain Back Valve: Yes
Beta Ratio: 2/20=14/31
Burst Pressure-PSI: 275
Max Flow Rate: 7-9 GPM
Nominal Micron Rating: 20
Gasket Diameters
Number O.D. I.D. Thk.
Attached 2.734 2.430 0.226
On my 08 Tacoma 4X4, 2.7L, I use the "quart size" M1 301 filter. It fits and works perfectly.
- Joined
- Sep 28, 2002
- Messages
- 39,799
Originally Posted By: richter1
On my 08 Tacoma 4X4, 2.7L, I use the "quart size" M1 301 filter. It fits and works perfectly.
I'm sure it works fine. I tend to try and stay off slight gasket mismatch paranoia preemptively. No bombs to explode.
On my 08 Tacoma 4X4, 2.7L, I use the "quart size" M1 301 filter. It fits and works perfectly.
I'm sure it works fine. I tend to try and stay off slight gasket mismatch paranoia preemptively. No bombs to explode.
I Agree. I made sure that there was full gasket contact on the mounting boss.
You could use a PH8A sized filter from any manufacture if you have the space for it.In that size Fords Motorcraft line is great so is Puralator,Baldwin,Hastings,Donaldson Stratapore and the M1 eqivalant are all great filters. It will add to the total capacity of your lube system as well.That is what I ran on my 22RE in my 4Runner and it is also what I ran if I rember right on my Dodge Dakota 4.7LV8.
- Status
