Good Afternoon To All,
I emailed the good folks at Prestone about using their new Cor-Guard formula in water cooled motorcycles. My bike is a 2001 Honda Valkyrie, the manual says to use Ethylene Glycol, no silicates and here is the response from Prestone:
Good Afternoon Frank,
No, that product does not contain any silicates and is recommended for use in all water-cooled motorcycle applications. Please let me know if you require anything further.
Sincerely,
Aaron Jones
Prestone Consumer Relations Representative
Phone: 203-731-8191
I've been paying about $28 for the Honda coolant for the gallon at the car dealerships, but Walmart sells the Prestone product I believe for $10-$11 for a gallon of the pre-mixed.
I will be switching over.
Thought this info would be helpful to post.
Frank
I emailed the good folks at Prestone about using their new Cor-Guard formula in water cooled motorcycles. My bike is a 2001 Honda Valkyrie, the manual says to use Ethylene Glycol, no silicates and here is the response from Prestone:
Good Afternoon Frank,
No, that product does not contain any silicates and is recommended for use in all water-cooled motorcycle applications. Please let me know if you require anything further.
Sincerely,
Aaron Jones
Prestone Consumer Relations Representative
Phone: 203-731-8191
I've been paying about $28 for the Honda coolant for the gallon at the car dealerships, but Walmart sells the Prestone product I believe for $10-$11 for a gallon of the pre-mixed.
I will be switching over.
Thought this info would be helpful to post.
Frank