After reading about how Militec-1 supposedly does not attract dirt/dust, I squirted some on areas of my engine (car) that see a lot of sand/dust. If those areas start to get caked up with sand/dust, I'll know if it attracts it.
Afterwards I'm going to clean off the surface and then apply Break Free CLP.
The specific areas are my hood latch (sees a lot of grit and sand) and the face of the alternator pulley (sits on top of the motor and dust/sand gets sucked into that area by the alternator cooling fan).
Afterwards I'm going to clean off the surface and then apply Break Free CLP.
The specific areas are my hood latch (sees a lot of grit and sand) and the face of the alternator pulley (sits on top of the motor and dust/sand gets sucked into that area by the alternator cooling fan).