Came in today but I didn't get to mess with it for very long before having to go to work. But, initial impressions are good. I had worried a little about a couple of the known issues with the gun (tendency to hammer-bite, heavy, gritty trigger pull, magazine not dropping free when released).
However, I was pleasantly surprised to see more than adequate space between the hammer and my hand. And the trigger pull feels fine - there is, of course, at least 1/4" of take up, but there's no creep or grittiness, and release is clean.
The mag also drops free when released.
Fit & finish are, of course, more than satisfactory, on initial inspection.
Can't wait to strip and clean it and take it to the range!
[/URL]
[/URL]
[/URL]
[/URL]
[/URL]
However, I was pleasantly surprised to see more than adequate space between the hammer and my hand. And the trigger pull feels fine - there is, of course, at least 1/4" of take up, but there's no creep or grittiness, and release is clean.
The mag also drops free when released.
Fit & finish are, of course, more than satisfactory, on initial inspection.
Can't wait to strip and clean it and take it to the range!