Any recommendations on a good fuel proof sealant, to seal the junction between the fuel fill neck and the hose that runs to the tank?
When the tank is full, or when my motorhome is parked on a slight incline towards the driver side, I have a small leak of diesel fuel, where the hose attaches to the fuel fill neck. I'm going to pull the hose, clean the ID of the hose and OD of the filler neck, and put it back together. But I'm concerned that may not be enough.
The motorhome is 22 years old, and I suspect the hose may be due for replacement. But, without pulling the LF wheel, it is difficult to get to the tank end of the hose. So for now I'm looking for a temporary solution, until I get a heavy duty bottle jack and jack stands, to support the motorhome while the wheel is removed, to access the fuel hose.
So, I'd like to find a sealant that would be fuel proof, and also be removable, for when I'm ready to replace the hose.
When the tank is full, or when my motorhome is parked on a slight incline towards the driver side, I have a small leak of diesel fuel, where the hose attaches to the fuel fill neck. I'm going to pull the hose, clean the ID of the hose and OD of the filler neck, and put it back together. But I'm concerned that may not be enough.
The motorhome is 22 years old, and I suspect the hose may be due for replacement. But, without pulling the LF wheel, it is difficult to get to the tank end of the hose. So for now I'm looking for a temporary solution, until I get a heavy duty bottle jack and jack stands, to support the motorhome while the wheel is removed, to access the fuel hose.
So, I'd like to find a sealant that would be fuel proof, and also be removable, for when I'm ready to replace the hose.