Mileage was 5666 on oil with 79,600 on unit the OLM had 44% left. They said that the average was 6500 for wear. Wonder why mine didn't fall into there?
From what I see I could do just as well with dino. My plan is to leave this in until I reroute PCV, at that time I will change to dino.
Is there anything else I need to worry about?
Not sure if I should go with Delo or Mobil. Have seen GREAT results with both. Let me know what your thoughts are.
Kevin
Iron: 8
Chromium: 0
Nickel: 0
Aluminum: 1
Lead: 6
Copper: 4
Tin: 0
Silver: 0
Titanium: 0
Silicon: 9
Boron: 2
Sodium: 1
Potassium: 2
Molybdenum: 2
Phosphorus: 1223
Zinc: 1532
Calcium: 3361
Barium: 0
Magnesium: 10
Fuel % Vol: .5
Vis cSt 100c: 13.07
SUS Viscosity@210F: 70.4
Flashpoint in F: 405
Antifreeze:0
Water:0
insolubles%: .3
From what I see I could do just as well with dino. My plan is to leave this in until I reroute PCV, at that time I will change to dino.
Is there anything else I need to worry about?
Not sure if I should go with Delo or Mobil. Have seen GREAT results with both. Let me know what your thoughts are.
Kevin
Iron: 8
Chromium: 0
Nickel: 0
Aluminum: 1
Lead: 6
Copper: 4
Tin: 0
Silver: 0
Titanium: 0
Silicon: 9
Boron: 2
Sodium: 1
Potassium: 2
Molybdenum: 2
Phosphorus: 1223
Zinc: 1532
Calcium: 3361
Barium: 0
Magnesium: 10
Fuel % Vol: .5
Vis cSt 100c: 13.07
SUS Viscosity@210F: 70.4
Flashpoint in F: 405
Antifreeze:0
Water:0
insolubles%: .3
Last edited: