For the first time in my life I used grease on the porcelain of the spark plugs. I went to do a piston soak today and the first one was stuck on good. I had to pull pretty hard while twisting to get it loose.
I used the clear/whitish grease that came with the plug wirese I put on a few months back. I probably only used a third of the tiny packet, just enough to coat the porcelain, not slather it on.
It seems as if the heat hardened the grease and made my plug bond to the rubber boot. Nothing was broken, but not sure how I would go about this next time!?
I used the clear/whitish grease that came with the plug wirese I put on a few months back. I probably only used a third of the tiny packet, just enough to coat the porcelain, not slather it on.
It seems as if the heat hardened the grease and made my plug bond to the rubber boot. Nothing was broken, but not sure how I would go about this next time!?