Originally Posted By: Drew99GT
Got it off; the cotter pin unscrews like a worm clamp. Once I had enough clearance, I cut it off. It was very loose.
I used this clamp to fix it. Couldn't find any constant tension worm clamps, so this should suffice as it won't cut the hose.
http://www.napaonline.com/Catalog/Catalo...1050_0361081397
If it gets real cold where you are those things will leak especially when used on plastic connections. At least it has a liner in it to stop the hose coming through the holes but that's of little help with cold leaking.
If it does leak don't keep tightening it, order a constant tension clamp either screw or spring style and coat the connection with Hylomar before assembly.
Hylomar is non setting and will last forever or until the part is disassembled, it allows the hose to be removed without cutting and prevents leaks on this type of plastic/rubber connection better than anything.
Its not cheap but i figured it out to about $1 a joint which isn't too bad.
http://www.amazon.com/Hylomar-HUBR02-Polyurethane-Sealant-Tube/dp/B007PBCZCI/ref=pd_sim_sbs_60_1?ie=UTF8&refRID=1HW9ACEWDHRKA05JH5R9&dpID=51sWyBQZj4L&dpSrc=sims&preST=_AC_UL160_SR160%2C160_