hi everyone.. i came across a rather interesting product being sold by a local cooperative.. they say it's made from coconut oil and they claim upwards of 20% in fuel consumption improvements with just 20% ratio..
i am very intrested to try it but before i do, can you please share your opinions and insights on the technical info they provided:
Flash Point at 256 C
Kinematic viscosity (at 40 C) at 27,37 cSt. based on ASTMD 445
Sulfated ash at 0,01 (% mass) based on ASTMD 874
Sulfur at 0,02 (% mass) based on ASTMD 4294
Copper strip corrosion (at 3 hours and at 50 C) at 1a (as compared to the standard of 3) based on ASTMD 130
Cloud point at 20 C based on ASTMD 2500
Total acid number at 5,04 (mg KOH/g) based on ASTMD 974
Free glycerin at 0,02 (% mass) based on AOCS Ea6-51 and total glycerin at 1,06 (% mass) based on AOCS Ca 14-56
i am very intrested to try it but before i do, can you please share your opinions and insights on the technical info they provided:
Flash Point at 256 C
Kinematic viscosity (at 40 C) at 27,37 cSt. based on ASTMD 445
Sulfated ash at 0,01 (% mass) based on ASTMD 874
Sulfur at 0,02 (% mass) based on ASTMD 4294
Copper strip corrosion (at 3 hours and at 50 C) at 1a (as compared to the standard of 3) based on ASTMD 130
Cloud point at 20 C based on ASTMD 2500
Total acid number at 5,04 (mg KOH/g) based on ASTMD 974
Free glycerin at 0,02 (% mass) based on AOCS Ea6-51 and total glycerin at 1,06 (% mass) based on AOCS Ca 14-56