Make: Kubota
Model: 105X
Engine: 105 hp turbocharged 4 cylinder
Oil used: Amsoil ACD 10W-30
Hours on sample: 567
Hours on Tractor: 637
Sump Capacity: 11 qts.
Oil Filters: EaBP100 & EaO26
Oil analyzed by: OAI
For reference here is the link to the previous two reports on the same oil: The First Two Reports
Iron 30
Chromium 0
Lead 2
Copper 40
Tin 0
Aluminum 10
Nickel 0
Silver 0
Silicon 14
Boron 1
Sodium 0
Magnesium 16
Calcium 3670
Barium 0
Phosphorus 1080
Zinc 1349
Molybdenum 0
Titanium 0
Vanadum 0
Potassium 0
Fuel VIS @ 100 C 10.65
Water 0
Soot/Solids 0.3
Coolant NO
TBN: 7.44
OXID: 26.0
NITR: 13.0
F-SOOT: 0.39
I was having trouble logging in, so my brother was kind enough to allow me to log in under his name.
Any comments on the report? Overall, I am pleased with the results. However, I will also confess I don't know enough about oil testing at this point to pick out any problems. Does anybody have any thoughts on the copper level?
Thanks,
Bobby Johnson
Model: 105X
Engine: 105 hp turbocharged 4 cylinder
Oil used: Amsoil ACD 10W-30
Hours on sample: 567
Hours on Tractor: 637
Sump Capacity: 11 qts.
Oil Filters: EaBP100 & EaO26
Oil analyzed by: OAI
For reference here is the link to the previous two reports on the same oil: The First Two Reports
Iron 30
Chromium 0
Lead 2
Copper 40
Tin 0
Aluminum 10
Nickel 0
Silver 0
Silicon 14
Boron 1
Sodium 0
Magnesium 16
Calcium 3670
Barium 0
Phosphorus 1080
Zinc 1349
Molybdenum 0
Titanium 0
Vanadum 0
Potassium 0
Fuel VIS @ 100 C 10.65
Water 0
Soot/Solids 0.3
Coolant NO
TBN: 7.44
OXID: 26.0
NITR: 13.0
F-SOOT: 0.39
I was having trouble logging in, so my brother was kind enough to allow me to log in under his name.
Any comments on the report? Overall, I am pleased with the results. However, I will also confess I don't know enough about oil testing at this point to pick out any problems. Does anybody have any thoughts on the copper level?
Thanks,
Bobby Johnson