A few options:I'm having a little diff problem with my used 2019 Toy Highlander with the 8 speen Aisin
with the side mounted pan. I've finally broken loose the fill bolt, however I'm rounding out
the bottom drain 10mm hex. I'll destroy it if neccessary to remove but I'm wondering,
can't find, the size and thread pitch for a new bolt to remove with typical socket. It appears
that someone overtorqued the bolts all over the vehicle, lugs too! It appears that they used
soft pot metal to make these.
- Sock-It-Out! tapered removers
- Astro offers hex sockets with a leading eccentric that swivels a bit and theoretically binds:
- pound a torx in there and use an impact. Push hard and just use a couple impacts per attempt. I've successfully done this on a '14 Taco