I am doing some suspension work on a Freightliner truck and was not able to free up the saddle shown in the picture from the 2 U bolts that pass through it. I was able to undo the nuts with a 6 ft cheater pipe on a 1 in breaker bar. Club hammer did not help freeing up the saddle and there is no room to swing a sledge hammer. Truck is a 2004, so the assembly has remained undisturbed for 13 years and road salt has done its work.
I keep reading that the CP717 is awesome, with tremendous power. I don't own one but might buy one. Would it be able to free up this assembly? I would like to avoid cutting the U bolts if possible. For reference, the U bolts are 3/4 in dia.