Recent Topics
PUP SP
by Koncrete_Cam - 06/05/20 05:52 AM
Hailstorm Yesterday
by Delta - 06/05/20 04:47 AM
Date code on Mighty Engine Guard II? Air Filter
by blufeb95 - 06/05/20 01:01 AM
My poor Jetta can't catch a break.
by FordBroncoVWJeta - 06/05/20 12:22 AM
Bought a truck finally, warning no Ford content
by bdcardinal - 06/04/20 11:31 PM
Got a septoplasty today....
by daves66nova - 06/04/20 10:44 PM
2020 330i xDrive Loaner
by MCompact - 06/04/20 10:02 PM
Appliance repair?
by motor_oil_madman - 06/04/20 09:44 PM
Glad we got a seasonal RV site
by Pat in Speedway - 06/04/20 09:19 PM
Mobil 1 AP Clearance at Wal-Mart
by KeithS_NW_Ohio - 06/04/20 09:07 PM
Recent experience with a Michelin Defender
by FordSVTGuy - 06/04/20 08:46 PM
music quality of speakers in the 70's vs now
by raaizin - 06/04/20 08:15 PM
pressure washer care
by raaizin - 06/04/20 08:06 PM
Watch Forums?
by maverickfhs - 06/04/20 07:53 PM
Who has a media/sand blast cabinet?
by spasm3 - 06/04/20 07:39 PM
Why isn't Polyethylene Glycol standard?
by RamFan - 06/04/20 06:37 PM
Motorcraft GF-6 at Quick Lane.
by Gene K - 06/04/20 06:29 PM
OEM Honda wiper blade curvature
by mclasser - 06/04/20 06:24 PM
GDI vs. MPFI OCI's
by LubricatusObsess - 06/04/20 06:19 PM
Mobil “full synthetic”
by 53' Stude - 06/04/20 06:01 PM
Newest Members
Jettero, stubby73, Polkaman, Ramboagain, tekfire07
71609 Registered Users
Who's Online Now
67 registered members (Best F100, 4WD, Alfred_B, BBC_bias, alarmguy, 1911CHAMPION, 5 invisible), 995 guests, and 27 spiders.
Key: Admin, Global Mod, Mod
Forum Statistics
Forums67
Topics306,230
Posts5,288,685
Members71,609
Most Online4,538
Jan 20th, 2020
Donate to BITOG
Print Thread
Hop To
Clogged zerk remedy? #5421329 05/05/20 04:58 AM
Joined: Sep 2013
Posts: 12,011
D
dlundblad Offline OP
OP Offline
D
Joined: Sep 2013
Posts: 12,011
What’s everyone’s fixes for these?

I also have a LockNLube coupler. Works great and arguably helps, but if it’s really clogged, it won’t do a thing besides fill the gun hose with grease and spew out when you remove the coupler. Lol.

Some people say to apply heat. The area is painted so I’d rather not unless a heat gun would work.


03 Jeep WJ 4.0 208k
02 Volvo S60 2.4T 199k
97 Chevy Blazer 4.3 175k
04 Audi A4 3.0 210k

Re: Clogged zerk remedy? [Re: dlundblad] #5421333 05/05/20 05:08 AM
Joined: Jul 2005
Posts: 34,296
D
demarpaint Offline
Offline
D
Joined: Jul 2005
Posts: 34,296
I clean the zerk fittings before and after greasing them, then cap them with the rubber caps used to seal vacuum lines. The king pins and drag link on my 88 Ford are OE, with the original zerk fittings which are not clogged and work perfectly.


God Bless Our Troops

Re: Clogged zerk remedy? [Re: dlundblad] #5421339 05/05/20 05:25 AM
Joined: Jul 2010
Posts: 23,692
Z
ZeeOSix Offline
Offline
Z
Joined: Jul 2010
Posts: 23,692
Originally Posted by dlundblad
Some people say to apply heat. The area is painted so I’d rather not unless a heat gun would work.


Try a heavy duty soldering iron.

Re: Clogged zerk remedy? [Re: dlundblad] #5421343 05/05/20 05:46 AM
Joined: Apr 2018
Posts: 1,832
I
Imp4 Online Content
Online Content
I
Joined: Apr 2018
Posts: 1,832
Can you unscrew the zero fitting?
Then clean it out and clean out any wax buildup in the female thread.

Reassemble and give it a go.

Re: Clogged zerk remedy? [Re: dlundblad] #5421369 05/05/20 06:49 AM
Joined: Mar 2004
Posts: 24,474
D
Donald Offline
Offline
D
Joined: Mar 2004
Posts: 24,474
They sell a kit to free the zerk fittings.

Alemite 339841 Zerk-Mate Grease Fitting/Joint Cleaner,Silver; Gold/Yellow; Black

Its pricey. I paid a lot less when I bought it in 2015.


2015 Ford F-250 w/Powerstroke
2016 Subaru Crosstrek CVT (wife's)
Re: Clogged zerk remedy? [Re: dlundblad] #5421398 05/05/20 07:36 AM
Joined: Feb 2009
Posts: 2,452
K
krismoriah72 Offline
Offline
K
Joined: Feb 2009
Posts: 2,452

Re: Clogged zerk remedy? [Re: dlundblad] #5421401 05/05/20 07:39 AM
Joined: Dec 2017
Posts: 6,500
S
Snagglefoot Offline
Offline
S
Joined: Dec 2017
Posts: 6,500
Sometimes it’s not the fitting where the problem is. It can be inside the item, such as an inner ball joint. In on case I completely changed the zerk fitting then obtained a zerk fitting cleaner, not for the zerk but for what was beyond.

A zerk fitting cleaner ( quality varies) can work well. Put a solvent in it and give it a hit with a hammer. I’ve been able to inject some solvent, let it sit for a few days and when I came back it was clear and I injected a copious amount of grease.


If you want the job done right......do it yourself.
Re: Clogged zerk remedy? [Re: dlundblad] #5421421 05/05/20 08:00 AM
Joined: May 2009
Posts: 14,969
A
ARCOgraphite Offline
Offline
A
Joined: May 2009
Posts: 14,969
Uhh, replace them? .. I have a whole little box of them - straight and 45 degree.


2019 VW Jetta S 6MT OCI#2 7378mi-MOTUL Specific VW508.00+VW Service Filter; '17 Subaru Crosstrek CVT OC#9 70254mi-Rotella
Gas Truck 5W20 + Fram Ultra 7317 Filter
Re: Clogged zerk remedy? [Re: dlundblad] #5421444 05/05/20 08:43 AM
Joined: Jan 2017
Posts: 263
6
64bawagon Offline
Offline
6
Joined: Jan 2017
Posts: 263
We never fought with them, they are too cheap to waste time trying to free up, replace it and move on. If the joint itself was clogged we shot it full of PB blaster, put the fitting back on and pressurized it with grease then noted it on the maintenance report and checked it the next time.


64 Chevy wagon, 10 Jeep Wrangler, 18 Silverado 1/2 ton
Re: Clogged zerk remedy? [Re: dlundblad] #5421465 05/05/20 09:15 AM
Joined: Jan 2015
Posts: 1,781
R
ragtoplvr Offline
Offline
R
Joined: Jan 2015
Posts: 1,781
some greases are not compatible and turn rock hard. Modem grease guns and fittings are not capable of high pressure. My old gun and chuck are rated at 10,000 PSI it can be very hard to pump and the fitting will stick on. But it breaks anything free.

Rod

Re: Clogged zerk remedy? [Re: ARCOgraphite] #5421473 05/05/20 09:28 AM
Joined: May 2005
Posts: 12,651
C
Char Baby Offline
Offline
C
Joined: May 2005
Posts: 12,651
Originally Posted by ARCOgraphite
Uhh, replace them? .. I have a whole little box of them - straight and 45 degree.


Yeah, I do the same.


Retired 6 yrs now & lovin' it
-----------------------------------

'80 Firebird FORMULA V8/4bbl-purchased "NEW"
'15 Nissan Altima 2.5 SV
'15 Honda Civic 1.8 LX
Re: Clogged zerk remedy? [Re: dlundblad] #5421560 05/05/20 11:28 AM
Joined: May 2010
Posts: 11,493
S
spasm3 Offline
Offline
S
Joined: May 2010
Posts: 11,493
i've used a pick, and tapped it with a small wrench or ball peen.


13 elantra 84k 5w30 synpwr
03 chevy avalanche 83k synpwr 5w30
17 mazda cx-5 19000 miles m1 0w30
Re: Clogged zerk remedy? [Re: Snagglefoot] #5422247 05/06/20 04:21 AM
Joined: Sep 2013
Posts: 12,011
D
dlundblad Offline OP
OP Offline
D
Joined: Sep 2013
Posts: 12,011
Originally Posted by Snagglefoot
Sometimes it’s not the fitting where the problem is. It can be inside the item, such as an inner ball joint. In on case I completely changed the zerk fitting then obtained a zerk fitting cleaner, not for the zerk but for what was beyond.

A zerk fitting cleaner ( quality varies) can work well. Put a solvent in it and give it a hit with a hammer. I’ve been able to inject some solvent, let it sit for a few days and when I came back it was clear and I injected a copious amount of grease.


This has always been my understanding too. I have my doubts that the fitting is the issue so we shall see.

I can’t recall if it is even replaceable.


03 Jeep WJ 4.0 208k
02 Volvo S60 2.4T 199k
97 Chevy Blazer 4.3 175k
04 Audi A4 3.0 210k

Re: Clogged zerk remedy? [Re: dlundblad] #5422264 05/06/20 05:26 AM
Joined: Jan 2011
Posts: 3,997
L
Lubener Offline
Offline
L
Joined: Jan 2011
Posts: 3,997
Originally Posted by dlundblad
What’s everyone’s fixes for these?

I also have a LockNLube coupler. Works great and arguably helps, but if it’s really clogged, it won’t do a thing besides fill the gun hose with grease and spew out when you remove the coupler. Lol.

Some people say to apply heat. The area is painted so I’d rather not unless a heat gun would work.

I replace the zerk fitting first.


The "thinking" man's friend.
Re: Clogged zerk remedy? [Re: dlundblad] #5422841 05/06/20 05:19 PM
Joined: Jan 2010
Posts: 552
S
super20dan Offline
Offline
S
Joined: Jan 2010
Posts: 552
the pick and hammer method almost always works


99 silverado 5.3
2003 tundra v6
1981 toyota cressida wagon
2003 kia sorento
04 toyota highlander 4cyl 2013 toyota rav4
Previous Thread
Index
Next Thread

BOB IS THE OIL GUY® Powered by UBB.threads™