Recent Topics
Mobil1 12 quart $30 at Walmart
by wkcars - 06/03/20 12:58 AM
"The Bright Knight"
by GumbyJarvis - 06/03/20 12:35 AM
Pennzoil Axle oil with LSA.
by Snagglefoot - 06/02/20 10:03 PM
Replaced the plugs on the bike: HUGE improvement!
by 14Accent - 06/02/20 09:26 PM
Accord Trans Case crack (bad casting?)
by redhat - 06/02/20 08:38 PM
Replacement SLA Battery for Clore Jumper
by SubLGT - 06/02/20 08:34 PM
ABS codes
by 2010Civic - 06/02/20 08:02 PM
Tie rod ends - which manufactures ok?
by jdw1222 - 06/02/20 07:40 PM
Who makes their own seltzer water?
by JLawrence08648 - 06/02/20 07:23 PM
Slight Tire Bulge
by coopns - 06/02/20 06:13 PM
gm 6.2l cylinder 8 misfiring only at idle
by apollo18 - 06/02/20 04:59 PM
Ford flex
by Micahmcmeen - 06/02/20 03:42 PM
Hengst Blue.care
by service_now - 06/02/20 03:14 PM
Windows Movie Maker
by Jetronic - 06/02/20 02:46 PM
Motul X-cess Gen2 and X-clean Gen2 5W-40
by The Critic - 06/02/20 02:10 PM
ATF Differences?
by AJB0009 - 06/02/20 02:01 PM
Worst relationship you've ever been in
by Lolvoguy - 06/02/20 01:58 PM
2 cycle with catalyst - carb settings?
by cjolson140 - 06/02/20 01:22 PM
Newest Members
boathead, Digital_Dad, RobertChapmant, NewMex, RandyN11049
71596 Registered Users
Who's Online Now
22 registered members (A_Privateer, Char Baby, czbrian, chemman, blufeb95, ArrestMeRedZ, 1 invisible), 1,293 guests, and 68 spiders.
Key: Admin, Global Mod, Mod
Forum Statistics
Forums67
Topics306,079
Posts5,286,955
Members71,596
Most Online4,538
Jan 20th, 2020
Donate to BITOG
Print Thread
Hop To
Page 1 of 2 1 2
C-1706 SAKURA Cut Open #5394988 04/05/20 10:07 PM
Joined: Dec 2019
Posts: 19
Q
QuangTeo Offline OP
OP Offline
Q
Joined: Dec 2019
Posts: 19
Hello everyone
Is anyone interested in filters that are not made in the USA?
It looks pretty good

z1818458469441_fcea6efa2506f8dc2434373918b1d335.jpgz1818458196285_32b1e3f932b057045f836cc25957c09c.jpgz1818465505215_c9eb36327e7e143510474e6981338950.jpgz1818464875103_dc408cbcc6aa916f83ba026bd25d9c73.jpgz1818458231221_3bb2b75d5a9fdb770856aa408af410e5.jpgz1818458084853_6d025ab0f888c084ed6611984d9c0715.jpgz1818458298677_e5c64b79cf238257312f225762f220e2.jpgz1818475856564_4dfaeacb5f6f3c8dad6aa85b8bdae8f6.jpg
Re: C-1706 SAKURA Cut Open [Re: QuangTeo] #5394998 04/05/20 10:19 PM
Joined: Jun 2012
Posts: 2,570
O
oldhp Offline
Offline
O
Joined: Jun 2012
Posts: 2,570
I like the cap on the spring. Looks like a very nice made filter.


"None of us are getting out here alive...drink that beer...eat that pizza...drive that Hot Rod"
"When others cut you down, remember where they came from."
"I don't run...........I just quietly wait"
Re: C-1706 SAKURA Cut Open [Re: oldhp] #5395008 04/05/20 10:28 PM
Joined: Dec 2019
Posts: 19
Q
QuangTeo Offline OP
OP Offline
Q
Joined: Dec 2019
Posts: 19
Yes. It protects housing from the sharp edges of the spring.

Re: C-1706 SAKURA Cut Open [Re: QuangTeo] #5395026 04/05/20 11:01 PM
Joined: Mar 2015
Posts: 15,322
53' Stude Offline
Offline
Joined: Mar 2015
Posts: 15,322
Originally Posted by QuangTeo
Yes. It protects housing from the sharp edges of the spring.



Looks good. Thank You for cut and post smile


2009 Toyota Camry LE
Re: C-1706 SAKURA Cut Open [Re: QuangTeo] #5395034 04/05/20 11:20 PM
Joined: Jun 2003
Posts: 20,846
C
Chris142 Offline
Offline
C
Joined: Jun 2003
Posts: 20,846
Wonder how efficient the paper is? Does it say "leak rested " on the closed end?


02 Wrangler Napa high milage 10w40
87 F250 Valvoline 15w40
07 fjcruiser Car lube plus 10w30
Z400 castrol T 10w40
Can am Maveric edge 5w40
57 case tractor Chevron sae30
Re: C-1706 SAKURA Cut Open [Re: Chris142] #5395038 04/05/20 11:29 PM
Joined: Dec 2019
Posts: 19
Q
QuangTeo Offline OP
OP Offline
Q
Joined: Dec 2019
Posts: 19
" Leak rested" , i thinks it ok, looks good. As for paper, I'm not sure because I don't know how to check them. [Linked Image]
[Linked Image]

Re: C-1706 SAKURA Cut Open [Re: QuangTeo] #5395104 04/06/20 02:35 AM
Joined: Feb 2003
Posts: 7,077
BlueOvalFitter Offline
Offline
Joined: Feb 2003
Posts: 7,077
Is that filter equivalent to the FL-1A?


2007 F150, 4.2 V6
Havoline PRO DS 5W20, M1-209A
"One Filter, One OCI!"
"One Box, One OCI!"
Re: C-1706 SAKURA Cut Open [Re: QuangTeo] #5395121 04/06/20 03:30 AM
Joined: Oct 2008
Posts: 4,381
F
Falcon_LS Offline
Offline
F
Joined: Oct 2008
Posts: 4,381
I've actually used Sakura filters for a couple of years on my Pajero (C-1052), before I could no longer get them.

Not sure what application the dissected filter is for, but it looks to be for a Japanese truck, maybe a Toyota Dyna or a Mitsubishi Canter?


Petro-Canada Duron HP 15W-40 CK-4/SN
99 Explorer: H17W02
00 Pajero: XG9688
01 Grand Marquis: XG2
05 Envoy: XG9837

Motorcraft 5W-50:
18 Mustang GT: XG10575
Re: C-1706 SAKURA Cut Open [Re: Falcon_LS] #5395122 04/06/20 03:39 AM
Joined: Dec 2019
Posts: 19
Q
QuangTeo Offline OP
OP Offline
Q
Joined: Dec 2019
Posts: 19
Yes. it use for Mazda T4000

Re: C-1706 SAKURA Cut Open [Re: BlueOvalFitter] #5395124 04/06/20 03:41 AM
Joined: Dec 2019
Posts: 19
Q
QuangTeo Offline OP
OP Offline
Q
Joined: Dec 2019
Posts: 19
No, they are different. It's an 1'-12, while FL-1A is M22x1.5. And i saw mark " S " on baseplate of FL-1A, is that heavy duty ?

Re: C-1706 SAKURA Cut Open [Re: QuangTeo] #5395125 04/06/20 04:15 AM
Joined: Aug 2011
Posts: 2,574
GumbyJarvis Offline
Offline
Joined: Aug 2011
Posts: 2,574
Looks like a Mahle.


2018 Ram 1500 5.7L SLT
Group 7 V2222 - Mobil 1 Truck & SUV 5w30
Re: C-1706 SAKURA Cut Open [Re: QuangTeo] #5395145 04/06/20 05:54 AM
Joined: Aug 2011
Posts: 2,037
K
kstanf150 Offline
Offline
K
Joined: Aug 2011
Posts: 2,037
Originally Posted by QuangTeo
No, they are different. It's an 1'-12, while FL-1A is M22x1.5. And i saw mark " S " on baseplate of FL-1A, is that heavy duty ?


MC FL-1A thread pitch is 3/4-16
It’s not M22x1.5 (FL-820 and FL-500)

Re: C-1706 SAKURA Cut Open [Re: QuangTeo] #5395207 04/06/20 07:36 AM
Joined: Mar 2017
Posts: 13,427
PimTac Offline
Offline
Joined: Mar 2017
Posts: 13,427
Looks decent. This is a Indonesian brand I think.


2017 Mazda CX5
Mobil 1 Annual Protection 0w20
Roki OEM filter.
Re: C-1706 SAKURA Cut Open [Re: PimTac] #5395208 04/06/20 07:38 AM
Joined: Aug 2011
Posts: 2,574
GumbyJarvis Offline
Offline
Joined: Aug 2011
Posts: 2,574
Originally Posted by PimTac
Looks decent. This is a Indonesian brand I think.


That's what I was thinking too. Looks similar to the Indonesian Mahle filters I run


2018 Ram 1500 5.7L SLT
Group 7 V2222 - Mobil 1 Truck & SUV 5w30
Re: C-1706 SAKURA Cut Open [Re: QuangTeo] #5395292 04/06/20 09:10 AM
Joined: Oct 2014
Posts: 15,254
C
CT8 Offline
Offline
C
Joined: Oct 2014
Posts: 15,254
Thanks fot the C&P, that is a very nice looking filter Fram and Purolater needs to study the construction.


2015 F150 2.7
2018 F350 6.2
Page 1 of 2 1 2
Previous Thread
Index
Next Thread

BOB IS THE OIL GUY® Powered by UBB.threads™