Hello all,
Great threads out there. Couple questions.
1. What does this mean? "they were torque to yield bolts. 36 ft lbs + 90 deg + 45 deg is the torque spec." Torque to 36 ft lbs, then 90 degrees, then 45 degrees?
2. What is rotation direction when putting the crank at TDC? Counter or clockwise?
Thanks,
Leo
Great threads out there. Couple questions.
1. What does this mean? "they were torque to yield bolts. 36 ft lbs + 90 deg + 45 deg is the torque spec." Torque to 36 ft lbs, then 90 degrees, then 45 degrees?
2. What is rotation direction when putting the crank at TDC? Counter or clockwise?
Thanks,
Leo
Last edited: