This sample was taken at the last oil change, which was the 2nd one for this vehicle since new. As noted in the report, there's still some wear-in metals, silicon etc. showing up due to the low total mileage, which I expected. This analysis was more about oil performance than the wear metals at this point. The moly content was higher than I anticipated--since this was the 2nd oil change on this vehicle, I would have expected the assembly lube to have been removed with the factory fill (1st oil change), so I'm a little puzzled by that amount. The viscosity was well within normal limits and the TBN was still good. Insolubles look good (Fram XG9688 filter). I'll likely use this combination going forward.