Recent Topics
Good aftermarket shocks and struts?
by Micahmcmeen - 02/21/20 09:49 PM
Oil Marketing
by Mathew_Boss - 02/21/20 09:45 PM
run to your walmart NOW!
by willow - 02/21/20 09:39 PM
When redundancy goes out the window
by Exhaustgases - 02/21/20 08:34 PM
Please help me decide....
by ecureed - 02/21/20 08:03 PM
Flywheel pic
by Chris142 - 02/21/20 07:49 PM
Rislone Hyper Fuel
by rrretiree7 - 02/21/20 07:40 PM
Bosch Brakes
by ChiTDI - 02/21/20 07:16 PM
Which 15W40 for an Onan generator?
by atikovi - 02/21/20 06:39 PM
Valvoline Advanced 5W40 MST
by BurntMusic - 02/21/20 06:04 PM
2014 F250, 6.7L 13,000 OCI Amsoil AME 15w40
by claluja - 02/21/20 05:43 PM
What Are These On My Caliper Pistons?
by Fitz98 - 02/21/20 05:37 PM
Gun carry insurance
by Colt - 02/21/20 05:25 PM
drywall crack. how do i fix it?
by WhyMe - 02/21/20 02:55 PM
Yokohama AVID Ascend GT
by Bottom_Feeder - 02/21/20 02:53 PM
Getting my Chevy 4.3 to 300k
by CharlotteB - 02/21/20 02:16 PM
Updated PDS for Valvoline ME
by buster - 02/21/20 01:56 PM
Havoline ProDS Full Synthetic
by Fordiesel69 - 02/21/20 01:32 PM
Correct oil for flat tappets
by Gokhan - 02/21/20 11:55 AM
Newest Members
Hubbs1982, AW4BYT, YOUSSEF, b3e3, Bogdon
70775 Registered Users
Who's Online Now
103 registered members (4WD, Astro14, bbhero, aaronc7, Blkstanger, BLND1, 9 invisible), 2,078 guests, and 19 spiders.
Key: Admin, Global Mod, Mod
Forum Statistics
Forums67
Topics301,765
Posts5,202,291
Members70,775
Most Online4,538
Jan 20th, 2020
Donate to BITOG
Print Thread
Hop To
Starter Replacement in 2012 Frontier #5205625 09/05/19 05:30 PM
Joined: Jun 2002
Posts: 20,909
MolaKule Offline OP
Global Moderator
OP Offline
Global Moderator
Joined: Jun 2002
Posts: 20,909
I just had my starter replaced in my 2012 Frontier with a Duralast starter.

Let's hope the Duralast outlasts the OEM part. shocked2

The solenoid would pull in (you could hear the click) but no cranking.

Luckily it died in the driveway so the tow truck had no problem lifting it.

It is located close to exhaust parts and even though there are two heat shields, it must have become, "cooked."

BBQed starters don't look or operate so well. grin2


I'm a Student Pilot. Frightening, isn't it?
Re: Starter Replacement in 2012 Frontier [Re: MolaKule] #5205641 09/05/19 05:52 PM
Joined: Oct 2011
Posts: 1,926
U
user52165 Offline
Offline
U
Joined: Oct 2011
Posts: 1,926
"Let's hope the Duralast outlasts the OEM part."

Never happen. OEM is best.

Dis you consider fixing it? Often simple and cheap.

Last edited by user52165; 09/05/19 05:57 PM.

Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy. It's inherent virtue is the equal sharing of misery.

Winston Churchill.
Re: Starter Replacement in 2012 Frontier [Re: MolaKule] #5205655 09/05/19 06:07 PM
Joined: Sep 2004
Posts: 8,653
A
andyd Offline
Offline
A
Joined: Sep 2004
Posts: 8,653
7 yr old original starter isn't awful. Have you turned the old in for core charge or are you gonna get it rebuilt?


'16 Camry LE STP synth 0w20 and STP filter. the Fridge

1994 Ranger ,the Rat, 5w30 dino, STP filter

'16 Camry SE, Valvoline HM 0w20 and OEM filter
Thick oil is better grin2
Re: Starter Replacement in 2012 Frontier [Re: MolaKule] #5205662 09/05/19 06:18 PM
Joined: Nov 2006
Posts: 22,976
T
Trav Offline
Offline
T
Joined: Nov 2006
Posts: 22,976
Yes, they are rebuildable at home but only if the field winding insulation didn't get cooked and short which is very possible from what you describe. Armature winding are usually okay unless the commutator get damaged but that is replaceable too a simple growler test will check it..


ASE L1, Master. Deutsch Meisterbrief.
Re: Starter Replacement in 2012 Frontier [Re: MolaKule] #5205672 09/05/19 06:37 PM
Joined: Jan 2017
Posts: 3,605
M
maxdustington Online Content
Online Content
M
Joined: Jan 2017
Posts: 3,605
Frontier = BITOG's truck!


99 Toyota Tercel CE 5EFE/C151
Re: Starter Replacement in 2012 Frontier [Re: MolaKule] #5205685 09/05/19 06:48 PM
Joined: Aug 2005
Posts: 970
K
kc8adu Offline
Offline
K
Joined: Aug 2005
Posts: 970
iirc the contacts fail.
a set is $10 shipped.
easy to replace.
some just flip the main one over and use it up.

Re: Starter Replacement in 2012 Frontier [Re: MolaKule] #5205750 09/05/19 08:23 PM
Joined: Aug 2017
Posts: 1,215
1
14Accent Offline
Offline
1
Joined: Aug 2017
Posts: 1,215
Good luck with the Duralast... had a customer in today that had their starter replaced a week ago with a white-box starter at another shop. Already junk.

I will only use one of those when the customer asks for the cheapest of the cheap. Otherwise, I go to my local rebuilder every time for starters and alternators.


2013 Chevrolet Volt - Saves enough in fuel to pay for itself!

2007 Chevrolet Impala LT
Re: Starter Replacement in 2012 Frontier [Re: MolaKule] #5205756 09/05/19 08:33 PM
Joined: Feb 2014
Posts: 3,549
L
Lolvoguy Offline
Offline
L
Joined: Feb 2014
Posts: 3,549
Originally Posted by MolaKule
It is located close to exhaust parts and even though there are two heat shields, it must have become, "cooked."

Nothing grinds my gears more than short-sighted designs like that.
My Focus had the same issue but with the alternator mounted at the back of the engine, with the exhaust mani right below it.
Luckily I disposed of the car before it required replacing.


06 Lexus IS350- Wife
88 BMW 325is- Mistress
Say "no" to Turbo!
Re: Starter Replacement in 2012 Frontier [Re: MolaKule] #5205884 09/06/19 03:58 AM
Joined: May 2015
Posts: 1,112
P
Popsy Offline
Offline
P
Joined: May 2015
Posts: 1,112
7 years isn't too bad IMO.

For sure they don't last as long as before, but like you say the location plays a big role...and new engines/cars with packed engine bay and high power density engines don't help.
My 23 and 21 yo Fiats have the starter sitting almost at the bottom rear of the engine, the diesel is still on the OEM Magnetti Marelli starter, but the Barchetta got a new Bosch starter recently.

The rebuilder told me it wouldn't have been worth a rebuild, now I'm unsure about that! The geared crown/pinion that engages into the flywheel (worry for bad English) was very worn out and they couldn't locate a suitable replacement.


96 Barchetta, 300V 5W40 | Forfour 95, M1 0W40
Mazda 6 2.3, Castrol 0W30 | Colt Ralliart, 300V 5W40
Re: Starter Replacement in 2012 Frontier [Re: MolaKule] #5206286 09/06/19 12:09 PM
Joined: Feb 2013
Posts: 3,827
Silverado12 Offline
Offline
Joined: Feb 2013
Posts: 3,827
I had a 1996 Chevy S-10 4 cyl that ate starters for the same reason. The exhaust manifold had to come off to access the starter.


12 Chevy Silverado ext. cab LS, 2WD 4.3 auto
18 Mustang GT 5.0 auto
07 Harley Dyna Street Bob 96 c.i. 6 sp.
00 Mustang GT auto
Re: Starter Replacement in 2012 Frontier [Re: user52165] #5206466 09/06/19 04:18 PM
Joined: Jun 2002
Posts: 20,909
MolaKule Offline OP
Global Moderator
OP Offline
Global Moderator
Joined: Jun 2002
Posts: 20,909
Originally Posted by user52165
"Let's hope the Duralast outlasts the OEM part."

Never happen. OEM is best.

Dis you consider fixing it? Often simple and cheap.


I usually rebuild all of our starters and alternators, but in this case I needed to lift it high enough to remove all of those heat shields and have enough room for removal, but did not have the lifting capability so I had my mechanic change it.

BTW, this is a geared and rather small size starter with a permanent magnet field system. So it still has brushes to energize the rotating armature. It turned out the brushes were ok but worn, but the wiring in the armature had shorted.

Last edited by MolaKule; 09/06/19 04:30 PM.

I'm a Student Pilot. Frightening, isn't it?
Re: Starter Replacement in 2012 Frontier [Re: Silverado12] #5206470 09/06/19 04:21 PM
Joined: Jun 2002
Posts: 20,909
MolaKule Offline OP
Global Moderator
OP Offline
Global Moderator
Joined: Jun 2002
Posts: 20,909
Originally Posted by Silverado12
I had a 1996 Chevy S-10 4 cyl that ate starters for the same reason. The exhaust manifold had to come off to access the starter.


I have a 1999 S-10 V6 that is on its second starter.


I'm a Student Pilot. Frightening, isn't it?
Re: Starter Replacement in 2012 Frontier [Re: MolaKule] #5346780 02/10/20 11:29 PM
Joined: Jun 2002
Posts: 20,909
MolaKule Offline OP
Global Moderator
OP Offline
Global Moderator
Joined: Jun 2002
Posts: 20,909
UPDATE: Well, the DuraLast reman didn't last long as it failed back in January.

This time I opted for a new starter and since the reman had a 2 year warranty on it it cost me $34,00 to get a new one.

The new starter spins faster and the engine starts within like 1/4 a second.


I'm a Student Pilot. Frightening, isn't it?
Re: Starter Replacement in 2012 Frontier [Re: MolaKule] #5346786 02/10/20 11:41 PM
Joined: Jun 2017
Posts: 179
D
Deontologist Offline
Offline
D
Joined: Jun 2017
Posts: 179
I put a Pep Boys Bosch reman in an old Camry. I then immediately put 12,000 miles on the car in 3 months from Ubering around with it.

That Bosch starter never skipped a single beat despite being a $120 reman. I must have started the car at least 10-15 times a day.

Toward the end I just started shutting off the car whenever possible, even if I had to jump into the gas station for a minute to buy a drink. Figured that I'd save some gas and I wanted to push the starter to the ragged edge.

Last edited by Deontologist; 02/10/20 11:41 PM.
Previous Thread
Index
Next Thread

BOB IS THE OIL GUY® Powered by UBB.threads™