2007 Ford Fusion Cam Pics
- Thread starter tig1
- Start date
- Status
![[Linked Image]](https://www.bobistheoilguy.com/forums/attachments/usergals/2019/08/full-24924-35618-dscf3263.jpg "[Linked Image]")
Looks like a new engine👠How many miles?
I can tell precisely from the pic: 246K
Not sure how you managed to keep the Nokia phone from the '90s for this pic.
Originally Posted by stevejones
I can tell precisely from the pic: 246K
yees of course... Maybe i will look at hes profile next time...†
I can tell precisely from the pic: 246K
yees of course... Maybe i will look at hes profile next time...†
4WD
$50 site donor 2024
Originally Posted by stevejones
I can tell precisely from the pic: 246K
Pretty darn clean considering 10k OCI's for all of that.
Being NA and PI helps - but still says over the counter M1's or similar brands resist break down well.
I can tell precisely from the pic: 246K
Pretty darn clean considering 10k OCI's for all of that.
Being NA and PI helps - but still says over the counter M1's or similar brands resist break down well.
Nice. Great job.
Originally Posted by Danno
Not sure how you managed to keep the Nokia phone from the '90s for this pic.
Looks like an image off an early '90's interlaced VGA monitor.
Not sure how you managed to keep the Nokia phone from the '90s for this pic.
Looks like an image off an early '90's interlaced VGA monitor.
Nick1994
$100 site donor 2024
Looks good
Did you take a picture of a picture?
How come the valve cover was off again?
Did you take a picture of a picture?
How come the valve cover was off again?
Not much varnish there for sure.
How is the valve lash and
How do the cam lobes measure over the nose .
Only two cars I'd want to keep forever:
My '65 Buick Electra 225 nailhead convertible
and My '81 Chevy S10 V6 2wd pickup with the rochester Varajet and the big port heads.
Unfortunately they are long gone. I had them when I lived in an apartment in my mid 20's and no place or extra money to store them.
How is the valve lash and
How do the cam lobes measure over the nose .
Only two cars I'd want to keep forever:
My '65 Buick Electra 225 nailhead convertible
and My '81 Chevy S10 V6 2wd pickup with the rochester Varajet and the big port heads.
Unfortunately they are long gone. I had them when I lived in an apartment in my mid 20's and no place or extra money to store them.
Originally Posted by ARCOgraphite
Not much varnish there for sure.
How is the valve lash and
How do the cam lobes measure over the nose .
Only two cars I'd want to keep forever:
My '65 Buick Electra 225 nailhead convertible
and My '81 Chevy S10 V6 2wd pickup with the rochester Varajet and the big port heads.
Unfortunately they are long gone. I had them when I lived in an apartment in my mid 20's and no place or extra money to store them.
No varnish at all, but what you see is residual oil. It's been 50k or so since the last VC change. Valve lash? No need on this engine TMK. Timing chain and engine remain quite, and the engine still performs very well with no increased oil use. About 4-6 0z in my normal 10K OCI.
Not much varnish there for sure.
How is the valve lash and
How do the cam lobes measure over the nose .
Only two cars I'd want to keep forever:
My '65 Buick Electra 225 nailhead convertible
and My '81 Chevy S10 V6 2wd pickup with the rochester Varajet and the big port heads.
Unfortunately they are long gone. I had them when I lived in an apartment in my mid 20's and no place or extra money to store them.
No varnish at all, but what you see is residual oil. It's been 50k or so since the last VC change. Valve lash? No need on this engine TMK. Timing chain and engine remain quite, and the engine still performs very well with no increased oil use. About 4-6 0z in my normal 10K OCI.
Originally Posted by tig1
Originally Posted by Danno
Not sure how you managed to keep the Nokia phone from the '90s for this pic.
Not so.
'80's?
Originally Posted by Danno
Not sure how you managed to keep the Nokia phone from the '90s for this pic.
Not so.
'80's?
Originally Posted by tig1
Originally Posted by Danno
Originally Posted by tig1
Originally Posted by Danno
Not sure how you managed to keep the Nokia phone from the '90s for this pic.
Not so.
'80's?
I use a Kyocera flip phone. How bout u.
Tig1: looks great, and Thank You for sharing details sir
Originally Posted by Danno
Originally Posted by tig1
Originally Posted by Danno
Not sure how you managed to keep the Nokia phone from the '90s for this pic.
Not so.
'80's?
I use a Kyocera flip phone. How bout u.
Tig1: looks great, and Thank You for sharing details sir
Originally Posted by stevejones
I can tell precisely from the pic: 246K
*****. That's funny! All I know is he used PP for over 30 years no problem
I can tell precisely from the pic: 246K
*****. That's funny! All I know is he used PP for over 30 years no problem
dnewton3
Staff member
Looks great under there.
My daughter has the 2.5L version in her 2012 Fusion.
Those are good engines overall.
My daughter has the 2.5L version in her 2012 Fusion.
Those are good engines overall.
Originally Posted by dnewton3
Looks great under there.
My daughter has the 2.5L version in her 2012 Fusion.
Those are good engines overall.
The Duratech engines are very reliable. My 2017 Fusion has the 2.5 and has performed very well. Also in my family my son has a 2008 Ranger 2.3 (180K) and my grandson has a 2012 Fusion 2.5 (130K). Both engines running great.
Looks great under there.
My daughter has the 2.5L version in her 2012 Fusion.
Those are good engines overall.
The Duratech engines are very reliable. My 2017 Fusion has the 2.5 and has performed very well. Also in my family my son has a 2008 Ranger 2.3 (180K) and my grandson has a 2012 Fusion 2.5 (130K). Both engines running great.
- Status
