Recent Topics
Are all 9012 bulbs HIR2?
by dvancleve - 01/18/20 03:30 PM
Ariens L-3 Synthetic Severe-Duty Gear Lube
by Astro_Guy - 01/18/20 02:04 PM
LSx Crank lock
by P10crew - 01/18/20 02:03 PM
ST9688 gasket
by Farnsworth - 01/18/20 01:26 PM
From my stash
by Fattylocks - 01/18/20 12:48 PM
Toyota to Mexico
by kstanf150 - 01/18/20 12:37 PM
Final Sludge Cleanup, HDEO - Diesel ??
by jssaab - 01/18/20 12:31 PM
A good cabin filter
by NH73 - 01/18/20 10:36 AM
K&N cut open.
by laserred96gt - 01/18/20 10:25 AM
Toyota Oem filter mileage
by Bettez88 - 01/18/20 10:22 AM
OCI, Owners manual versus oil Mfg.
by VQLT - 01/18/20 10:06 AM
MacBook Pro to Microsoft Surface
by Kira - 01/18/20 09:53 AM
Ford 5R55E Auxiliary Transmission Filter
by benjamming - 01/18/20 09:33 AM
Do all synthetic oils act as a cleaner?
by Loobit - 01/18/20 08:26 AM
Mobil 1 ESP now sold in 5qt jugs
by Patman - 01/18/20 08:12 AM
Mobil 1 Extended Performance Oil Filters
by jrommelt - 01/18/20 08:08 AM
These the same?
by Bettez88 - 01/18/20 06:53 AM
MaxLife SB 10w40 on Sale
by Mad_Hatter - 01/18/20 04:27 AM
Newest Members
Bebo77, 2EHA, jonnyb433, kzbd, 54Robert
70465 Registered Users
Who's Online Now
91 registered members (AlienBug, ARCOgraphite, ammolab, 2015_PSD, 14Accent, 8 invisible), 2,315 guests, and 20 spiders.
Key: Admin, Global Mod, Mod
Forum Statistics
Forums67
Topics300,290
Posts5,172,558
Members70,465
Most Online3,728
Jan 11th, 2020
Donate to BITOG
Print Thread
Hop To
DIY: Mazda 2.5L Skyactiv Water Pump #5194360 08/23/19 05:03 AM
Joined: Aug 2004
Posts: 21,466
The Critic Offline OP
OP Offline
Joined: Aug 2004
Posts: 21,466
Mazda Skyactiv engines seem to be popular on this site so hopefully this is a helpful DIY.

Replacing the engine water pump on the 2.5’s is very very easy. I think the 2.0 is similar. This job was performed on a 2014 with 125K. The water pump had some coolant staining on the body and there was some splattered coolant (residue) in the adjacent area. This condition had been present for the last 15K. According to the Mazda TSB, this was still passable since there was no active leak but the customer still wanted the pump replaced.

The pump pulley is held on by three 8mm bolts. There is a big hole on the pulley (and a corresponding recess on the pump) where you can insert a bolt and the pulley will lock onto the body. The pump itself is bolted to the engine using 3 10mm bolts. Undo the wire harness clip and the 10mm clamp bolt for the inlet pipe. Pump comes out. The new pump from Mazda, came with the pump gasket pre-installed but the water inlet pipe o-ring is sold separately. You must replace the o-ring.

You will also need a new stretch belt, a new alternator belt and almost two gallons of the Mazda FL22 55/45 pre-mix. Vacuum fill the system, allow the engine to idle for 30-45 min (until the rad fan comes on) with a coolant funnel or with the rad cap off, extract and refill the coolant reservoir and you should be good to go!

Parts needed:
#PEDD-15-010 $119.28
#PE01-15-287 $2.32
#PY01-15-908 (CX-5 2.5L) $20.17
#PY01-15-909A (CX-5 2.5L) $37.48
#0000-77-508E-20 (qty: 2) $25.32/gal

1CDC9589-9AB6-4883-B279-5A472C988C25.jpeg3A9D29C6-C303-4B51-8614-8550282261D0.jpeg57C38DCC-4C7B-47FD-AACD-19490C566017.jpeg5ADC0882-33B2-4F19-B10E-C2842080651A.jpegBE470AE3-0957-4E5E-A919-2B5BBBBA38CF.jpeg
Last edited by The Critic; 08/23/19 05:25 AM.

2011 Toyota Prius 1.8L - 202K - Valvoline Premium Blue Restore 10W-30
2007 Honda Accord 2.4L - 143K - Valvoline Premium Blue Restore 10W-30
Re: DIY: Mazda 2.5L Skyactiv Water Pump [Re: The Critic] #5194400 08/23/19 06:16 AM
Joined: Apr 2010
Posts: 4,464
B
BMWTurboDzl Offline
Offline
B
Joined: Apr 2010
Posts: 4,464
Thanks for sharing! I always enjoy reading this stuff.


“It took untold generations to get you where you are. A little gratitude might be in order. If you’re going to insist on bending the world to your way, you better have your reasons.”

435i
Re: DIY: Mazda 2.5L Skyactiv Water Pump [Re: The Critic] #5194467 08/23/19 07:54 AM
Joined: Nov 2002
Posts: 32,683
B
buster Offline
Offline
B
Joined: Nov 2002
Posts: 32,683
Thanks Critic, good write up.


2019 Frontier Pro 4X - RGT 5w30
2019 Impreza Sport - OE fill
Re: DIY: Mazda 2.5L Skyactiv Water Pump [Re: The Critic] #5194585 08/23/19 10:38 AM
Joined: Jan 2009
Posts: 19
C
cudavid Offline
Offline
C
Joined: Jan 2009
Posts: 19
Thanks for a good write up Can you offer a followup please?
The stretch belt is new to me , how did you remove and install? Thank you

Re: DIY: Mazda 2.5L Skyactiv Water Pump [Re: cudavid] #5194589 08/23/19 10:43 AM
Joined: Aug 2004
Posts: 21,466
The Critic Offline OP
OP Offline
Joined: Aug 2004
Posts: 21,466
Originally Posted by cudavid
Thanks for a good write up Can you offer a followup please?
The stretch belt is new to me , how did you remove and install? Thank you

For removal, you can either cut the belt or pull the belt towards you and rotate the crank pulley simultaneously.

For install, zip-tie the belt to the p/s pulley and slowly turn the crank while ensuring that the belt is walking onto the pulley grooves.


2011 Toyota Prius 1.8L - 202K - Valvoline Premium Blue Restore 10W-30
2007 Honda Accord 2.4L - 143K - Valvoline Premium Blue Restore 10W-30
Re: DIY: Mazda 2.5L Skyactiv Water Pump [Re: The Critic] #5194603 08/23/19 11:02 AM
Joined: Dec 2006
Posts: 28
5
50jeffrey Offline
Offline
5
Joined: Dec 2006
Posts: 28
If the vehicle is a 2015 or newer, there is no p/s pulley, as the vehicle has electric-assist steering (no pump). Can just zip-tip the belt to the w/p pulley itself.

Re: DIY: Mazda 2.5L Skyactiv Water Pump [Re: The Critic] #5194999 08/23/19 07:49 PM
Joined: Jul 2013
Posts: 1,387
S
splinter Offline
Offline
S
Joined: Jul 2013
Posts: 1,387
Nice!

I autocross my Miata which is indeed a joy on which to twist wrenches.

Upside to competing -besides the fun- is Mazda NA HQ in Irvine supplies all factory replacement hardware at actual dealer cost.
They're a great company with solid hardware imho.


PUP 0W-40
Total Quartz 5W-40
M1 5W-50

Past performance is no guarantee of future results.
Re: DIY: Mazda 2.5L Skyactiv Water Pump [Re: The Critic] #5323293 01/15/20 09:49 AM
Joined: Aug 2018
Posts: 355
J
jayjr1105 Offline
Offline
J
Joined: Aug 2018
Posts: 355
Originally Posted by The Critic
Mazda Skyactiv engines seem to be popular on this site so hopefully this is a helpful DIY.

Replacing the engine water pump on the 2.5’s is very very easy. I think the 2.0 is similar. This job was performed on a 2014 with 125K. The water pump had some coolant staining on the body and there was some splattered coolant (residue) in the adjacent area. This condition had been present for the last 15K. According to the Mazda TSB, this was still passable since there was no active leak but the customer still wanted the pump replaced.

The pump pulley is held on by three 8mm bolts. There is a big hole on the pulley (and a corresponding recess on the pump) where you can insert a bolt and the pulley will lock onto the body. The pump itself is bolted to the engine using 3 10mm bolts. Undo the wire harness clip and the 10mm clamp bolt for the inlet pipe. Pump comes out. The new pump from Mazda, came with the pump gasket pre-installed but the water inlet pipe o-ring is sold separately. You must replace the o-ring.

You will also need a new stretch belt, a new alternator belt and almost two gallons of the Mazda FL22 55/45 pre-mix. Vacuum fill the system, allow the engine to idle for 30-45 min (until the rad fan comes on) with a coolant funnel or with the rad cap off, extract and refill the coolant reservoir and you should be good to go!

Parts needed:
#PEDD-15-010 $119.28
#PE01-15-287 $2.32
#PY01-15-908 (CX-5 2.5L) $20.17
#PY01-15-909A (CX-5 2.5L) $37.48
#0000-77-508E-20 (qty: 2) $25.32/gal


What is the bottom half part you're holding in the last pic?


2013 Mazda 3 - PP 0w20
2005 Honda Odyssey - PP HM 5w20
Re: DIY: Mazda 2.5L Skyactiv Water Pump [Re: The Critic] #5323299 01/15/20 09:58 AM
Joined: Feb 2005
Posts: 1,990
B
bulwnkl Offline
Offline
B
Joined: Feb 2005
Posts: 1,990
Thanks for the write-up!


I use speech recognition frequently. Please excuse any consequent grammatical or typographical errors.
Previous Thread
Index
Next Thread

BOB IS THE OIL GUY® Powered by UBB.threads™