Recent Topics
Menards Formula Shell
by Duffyjr - 09/20/19 05:35 AM
Best Nubuck protector/waterproof
er

by PW01 - 09/20/19 04:14 AM
Aircraft Tempest Spin-EZ AA-48108-2
by Capt - 09/19/19 11:22 PM
Emission Readiness monitors
by bowlofturtle - 09/19/19 10:12 PM
Thoughts on the GM strike?
by Vern_in_IL - 09/19/19 09:37 PM
tropical storm imelda blows up everynight?
by motor_oil_madman - 09/19/19 09:12 PM
2017 Corvette / Mobil 1 ESP 0w40 / 5.2k mi
by dparm - 09/19/19 08:57 PM
2019 Lexus UX 250h
by Direct_Rejection - 09/19/19 08:56 PM
Gas theft
by tahoe_hybrid - 09/19/19 08:04 PM
Aisin 09G transmission fluid?
by sloinker - 09/19/19 07:44 PM
Oil for 2005 BMW X3
by Nyquist - 09/19/19 07:34 PM
Golden Eagles Take Down Deer and Wolves
by buster - 09/19/19 07:31 PM
P21S Windshield Washer Booster
by mclasser - 09/19/19 06:30 PM
Why warm up oil before a UOA sample is taken?
by paulri - 09/19/19 06:21 PM
Selling the 97 Camry V6 again
by PandaBear - 09/19/19 05:15 PM
FRAM Orange Cans
by KevGuy - 09/19/19 05:13 PM
Newest Members
Jeojevero, Repertech, Bluttoboy, Srfridd, V1313
69336 Registered Users
Who's Online Now
65 registered members (2002 Maxima SE, 4WD, atikovi, aquariuscsm, avi1777, 53' Stude, 7 invisible), 1,100 guests, and 25 spiders.
Key: Admin, Global Mod, Mod
Forum Statistics
Forums67
Topics294,804
Posts5,066,971
Members69,336
Most Online3,532
Jul 30th, 2019
Donate to BITOG
Print Thread
Hop To
Heavy Duty Clutch Kit for 2002 Accord? #5189809 08/17/19 06:33 PM
Joined: Jun 2018
Posts: 6
M
md6040vr6t Offline OP
OP Offline
M
Joined: Jun 2018
Posts: 6
This is going to be a long job, difficult job for me. My orig. clutch in this car has now gone 145,000. I feel its days nearing an end.

Was looking for options for clutches that are as long lasting, or perhaps a little longer lasting. Something with a little more pressure and solidness than the original would be nice, but not exactly something where I feel like I’m driving a full blown race car either.

Any suggestions? Right now it’s me on a goose-chase with so many options I have to take a step back and ask for recommendations.

I’m very leery of local auto parts stores for major parts like a clutch. She feel like they’re very expensive and maybe good maybe not the guy at the counter doesn’t know.

Re: Heavy Duty Clutch Kit for 2002 Accord? [Re: md6040vr6t] #5189818 08/17/19 06:44 PM
Joined: Dec 2011
Posts: 6,584
rooflessVW Offline
Offline
Joined: Dec 2011
Posts: 6,584
Can't go wrong with Spec or South Bend clutches.


"Zed's dead baby, Zed's dead."
Re: Heavy Duty Clutch Kit for 2002 Accord? [Re: md6040vr6t] #5189829 08/17/19 07:09 PM
Joined: Sep 2004
Posts: 8,434
A
andyd Offline
Offline
A
Joined: Sep 2004
Posts: 8,434
Clutch has 145K miles. Does it slip? grind? If no then mmmaybe Bleed the clutch slave cylinder. I would replace with a LUK or whatever OEM quality yu can find. A stiff pressure plate can affect the end play of the crankshaft. I love the stock feel of the LUK OEM I put in the Ranger along with a rear mains, fly wheel throw out bearing/slave and MC


'16 Camry LE STP synth 0w20 and STP filter. the Fridge

1994 Ranger ,the Rat, 5w30 dino, STP filter

'16 Camry SE, Valvoline HM 0w20 and OEM filter
Thick oil is better grin2
Re: Heavy Duty Clutch Kit for 2002 Accord? [Re: md6040vr6t] #5189838 08/17/19 07:18 PM
Joined: Apr 2010
Posts: 2,386
A
atikovi Online Content
Online Content
A
Joined: Apr 2010
Posts: 2,386
https://www.exedyusa.com/

The last kit I bought for a Honda had an oem Honda pressure plate.

Re: Heavy Duty Clutch Kit for 2002 Accord? [Re: md6040vr6t] #5189866 08/17/19 07:53 PM
Joined: Mar 2008
Posts: 8,735
S
slacktide_bitog Offline
Offline
S
Joined: Mar 2008
Posts: 8,735
Exedy's OE replacement clutch

In fact, Exedy may be the OE supplier

Re: Heavy Duty Clutch Kit for 2002 Accord? [Re: md6040vr6t] #5189901 08/17/19 08:48 PM
Joined: Jun 2003
Posts: 19,488
C
Chris142 Offline
Offline
C
Joined: Jun 2003
Posts: 19,488
Why do you think it's about done? The clutch on our shop truck made it to 369k.


02 Wrangler Napa high milage 10w40
87 F250 Valvoline 15w40
07 fjcruiser Car lube plus 10w30
Z400 castrol T 10w40
Can am Maveric edge 5w40
57 case tractor Chevron sae30
Re: Heavy Duty Clutch Kit for 2002 Accord? [Re: md6040vr6t] #5189928 08/17/19 09:29 PM
Joined: Jul 2005
Posts: 32,989
D
demarpaint Offline
Offline
D
Joined: Jul 2005
Posts: 32,989
If there is no bad chatter, slipping, or grinding going into first or reverse I'd leave it alone. A clutch can outlast the car with the right driver and conditions.


God Bless Our Troops

Re: Heavy Duty Clutch Kit for 2002 Accord? [Re: md6040vr6t] #5189936 08/17/19 09:48 PM
Joined: Jun 2003
Posts: 34,830
E
eljefino Offline
Offline
E
Joined: Jun 2003
Posts: 34,830
Do your clutch hydraulics have any sort of accumulator that makes it slightly slower to engage? There may be a hack to get rid of that. They put them in at the factory so if you side-step the clutch you might not stall it.

On my camry the LUK was stiffer than the Sachs but both were good-- I wouldn't define good by stiffness alone. The pressure plate fingers and hydraulics, if designed well, have the most mechanical advantage where needed.

Re: Heavy Duty Clutch Kit for 2002 Accord? [Re: md6040vr6t] #5190024 08/18/19 01:26 AM
Joined: Nov 2008
Posts: 966
C
CELICA_XX Offline
Offline
C
Joined: Nov 2008
Posts: 966
I had a 2002 Accord that was randomly low on fluid. (ironically at that same mileage)

Added some DOT3 and never had a problem again.


15 Toyota Prius - M1 EP 0w20 SN+
06 Acura MDX - M1 EP HM 5w30 SN+
02 Toyota ECHO - Valv MaxLife Syn 5w30 SN
97 Lexus LX450 - M1 EP HM 5w30 SN+
93 Lexus LS400 - M1 EP HM 5w30 SN+
Re: Heavy Duty Clutch Kit for 2002 Accord? [Re: md6040vr6t] #5190135 08/18/19 08:03 AM
Joined: Mar 2013
Posts: 5,893
S
skyactiv Online Content
Online Content
S
Joined: Mar 2013
Posts: 5,893
WHY do you want a heavier clutch pedal for? I doubt you will put another 145K on your Accord.
Stick to OEM which isin't as expensive as you think. Most people don't even bother looking up prices of OEM parts.

Honda doesn't mark them up a crazy amount. $126.46 for the OEM pressure plate, $110.13 for the friction disc, $70 for the release bearing, all Japanese superior quality.
But young guys that own older Hondas rice them up.

https://www.cheaperhondaparts.com


Wife: 15' Audi A4 quattro 6 speed manual
Me: 13' VW GTI 3 door 6 speed manual
2018 Elantra Sport 6 speed manual


Previous Thread
Index
Next Thread

BOB IS THE OIL GUY® Powered by UBB.threads™