Recent Topics
Mobil 1 AP Clearance at Wal-Mart
by KeithS_NW_Ohio - 06/04/20 09:07 PM
Recent experience with a Michelin Defender
by FordSVTGuy - 06/04/20 08:46 PM
music quality of speakers in the 70's vs now
by raaizin - 06/04/20 08:15 PM
pressure washer care
by raaizin - 06/04/20 08:06 PM
Watch Forums?
by maverickfhs - 06/04/20 07:53 PM
Who has a media/sand blast cabinet?
by spasm3 - 06/04/20 07:39 PM
Why isn't Polyethylene Glycol standard?
by RamFan - 06/04/20 06:37 PM
Motorcraft GF-6 at Quick Lane.
by Gene K - 06/04/20 06:29 PM
OEM Honda wiper blade curvature
by mclasser - 06/04/20 06:24 PM
GDI vs. MPFI OCI's
by LubricatusObsess - 06/04/20 06:19 PM
Mobil “full synthetic”
by 53' Stude - 06/04/20 06:01 PM
1992 Ford Ranger Brake Fluid Type
by yeehaw1960 - 06/04/20 04:21 PM
Of 0w-20 oils, which have highest VI
by Bill_W - 06/04/20 03:44 PM
Gasket vs RTV?
by supton - 06/04/20 02:29 PM
List Impossible Sparkplug Replacement
by borgward - 06/04/20 01:31 PM
BMW Diesels
by Trix - 06/04/20 12:21 PM
Shell Rotella Gas Truck 0W-20 UOA Honda Civic
by Davejam - 06/04/20 11:50 AM
replacement tires for 2013 vw passat 2.5
by jstert - 06/04/20 11:04 AM
Newest Members
stubby73, Polkaman, Ramboagain, tekfire07, Kernal
71608 Registered Users
Who's Online Now
98 registered members (2015_PSD, 77GrandPrix, 2010Civic, 97prizm, 4WD, ARB1977, 4 invisible), 1,868 guests, and 29 spiders.
Key: Admin, Global Mod, Mod
Forum Statistics
Forums67
Topics306,220
Posts5,288,501
Members71,608
Most Online4,538
Jan 20th, 2020
Donate to BITOG
Print Thread
Hop To
Page 1 of 2 1 2
Craftsman floor jack rebuild #5113488 05/23/19 01:14 PM
Joined: May 2008
Posts: 333
I
i6pwr Offline OP
OP Offline
I
Joined: May 2008
Posts: 333
Surely enough as I'm nearing the end of my rod bearing replacement, my floor jack decides to start leaking down.

This is the jack, has anyone rebuilt these and/or replaced any seals?

I can crank the handle down as hard as I can but it will slowly drop with weight on the cup.

I don't think its low on oil, but possibly.

All input appreciated.

Screenshot_20190523-140510_Gallery.jpgScreenshot_20190523-140528_Gallery.jpg
Re: Craftsman floor jack rebuild [Re: i6pwr] #5113499 05/23/19 01:25 PM
Joined: Jan 2017
Posts: 3,656
M
maxdustington Offline
Offline
M
Joined: Jan 2017
Posts: 3,656
Check out the jack repair threads on The Garage Journal. Import jacks seem to be fairly generic, so you can probably rebuild it. Old imports might be worth it (1970s-1980s), but new ones probably aren't unless you are looking for a project. You might need a pin spanner to get the tank nut off, but this one might not require that tool.


99 Toyota Tercel CE 5EFE/C151
PUP 5W30/Ultra
Re: Craftsman floor jack rebuild [Re: i6pwr] #5113528 05/23/19 01:46 PM
Joined: Sep 2005
Posts: 671
T
Touring5 Offline
Offline
T
Joined: Sep 2005
Posts: 671
That looks exactly like my (leaky) Craftsman jack. I got mine around 2003? I happened across a video that explained how to replace the o-rings, but I could never get the nut off the cylinder. I believe these jacks are examples of how far Craftsman had fallen - just Chinese jacks painted and labeled for Sears. As I recall the jack only had a 90-day warranty.


https://m.youtube.com/watch?v=vIp8GO5PIFA



FIRST LAW OF DEBATE
Never argue with a fool - people might
not know the difference.
Re: Craftsman floor jack rebuild [Re: i6pwr] #5113582 05/23/19 02:33 PM
Joined: Aug 2017
Posts: 1,540
D
Dave9 Offline
Offline
D
Joined: Aug 2017
Posts: 1,540
^ How far they've fallen? I consider it reasonable service life to get 16 years out of a *budget* jack before it needs repaired.

I have an older version of that C-Man, back when they made them just as sturdy but were rated for only 2.(something) tons and were light silver with a black handle.

I do recall that once I had my C-Man on its side or upside down or something (I was cleaning it, IIRC) and had to bleed air out and top off the fluid to get it to stay up, and it has worked fine since then.

Definitely try to bleed it and top off the oil before planning a rebuild. It also looks like it could use some cleaning and lubing from the second pic.

Re: Craftsman floor jack rebuild [Re: i6pwr] #5113585 05/23/19 02:36 PM
Joined: May 2019
Posts: 346
D
DoubleNickels Offline
Offline
D
Joined: May 2019
Posts: 346
Hydraulic fluid is not leaking. Maybe it's all leaked out.

First, purge air from the system. Then top off fluid. Now clean off exterior and lubricate all moving parts. If all is well, it will work. If not, you will see the leak. If there's a leak, you will need new seals, gaskets, and o-rings.

Re: Craftsman floor jack rebuild [Re: i6pwr] #5113611 05/23/19 03:05 PM
Joined: May 2008
Posts: 333
I
i6pwr Offline OP
OP Offline
I
Joined: May 2008
Posts: 333
I agree it's not the cleanest, I had just finished R&R my oil pan to replace rod bearings, and the jack has seen its share of fluids from the vehicle during the whole process.

It will lift all the way up, just won't hold a reasonably heavy load...over maybe 100 lbs. It will very, very slowly leak down, holding up a crossmember under the trans, it leaks down about maybe 1/4" per second.

It has a rubber plug on the cylinder and if I try to pry it up I can hear air either escaping to trying to enter.

Re: Craftsman floor jack rebuild [Re: i6pwr] #5113635 05/23/19 03:20 PM
Joined: May 2014
Posts: 4,712
Yah-Tah-Hey Offline
Offline
Joined: May 2014
Posts: 4,712
You can find rebuild kits on the internet. I have a Craftsman 2 ton floor jack purchased in the 1980. Have changed fluid regularly. One thing I have noticed is the jack will puke oil out the fill plug if filled with too much oil. Search for repair kits by entering your jack's model number.

Re: Craftsman floor jack rebuild [Re: i6pwr] #5113660 05/23/19 03:43 PM
Joined: Oct 2014
Posts: 15,266
C
CT8 Offline
Offline
C
Joined: Oct 2014
Posts: 15,266

Buy a new jack.


2015 F150 2.7
2018 F350 6.2
Re: Craftsman floor jack rebuild [Re: Touring5] #5113774 05/23/19 05:36 PM
Joined: Jan 2017
Posts: 3,656
M
maxdustington Offline
Offline
M
Joined: Jan 2017
Posts: 3,656
Originally Posted by Touring5
That looks exactly like my (leaky) Craftsman jack. I got mine around 2003? I happened across a video that explained how to replace the o-rings, but I could never get the nut off the cylinder. I believe these jacks are examples of how far Craftsman had fallen - just Chinese jacks painted and labeled for Sears. As I recall the jack only had a 90-day warranty.


https://m.youtube.com/watch?v=vIp8GO5PIFA
They were rebranding Japanese jacks as early as the late 1960s IIRC. 1970s for sure.


99 Toyota Tercel CE 5EFE/C151
PUP 5W30/Ultra
Re: Craftsman floor jack rebuild [Re: i6pwr] #5113779 05/23/19 05:41 PM
Joined: Aug 2015
Posts: 457
KJSmith Offline
Offline
Joined: Aug 2015
Posts: 457

Last edited by KJSmith; 05/23/19 05:44 PM.
Re: Craftsman floor jack rebuild [Re: i6pwr] #5113791 05/23/19 06:01 PM
Joined: May 2019
Posts: 182
O
OnTheRocks Offline
Offline
O
Joined: May 2019
Posts: 182
Start with cleaning and lubricating. Get fresh fluid. Be sure to buy hydraulic fluid sold as jack oil. Do not substitute with transmission fluid, motor oil, brake fluid, or anything else you think will work. Drain the jack. Add fresh fluid. Purge air. Then top off the jack. You may not need to rebuild at all. Plenty of videos online showing you how to purge the air and refill the jack.







Re: Craftsman floor jack rebuild [Re: i6pwr] #5113844 05/23/19 06:52 PM
Joined: Aug 2013
Posts: 3,980
H
HangFire Offline
Offline
H
Joined: Aug 2013
Posts: 3,980
In rebuilt my 3-ton, 1990's, Japan built floor jack over the New Year's holiday. Half the battle is identifying the right parts kit. It will come with extra parts, for similar jacks, which always makes it interesting. For my jack, the main problem was the large seal at the end of the ram had shrunk over time. I replaced everything soft, and the ball bearings. Should be good for another 30 years.

I got my kit from Lazzar's Floor Jack aka HCRCnow.com. If you can't identify the jack from their website and your jack markings, give them a call.

When my jack started bleeding down, everything in my garage ground to a halt. I almost purchased a HF jack, glad I didn't. I spent $60 for a rebuild kit, would have spent $90 for a HF jack, but it wouldn't be the rebuildable plate steel 85 pound beast that this thing is.

jackfix_10x7_143552095.jpgjackfix_10x7_144734453.jpgjackfix_10x7_175237323.jpgjackfix_10x7_175243948.jpgrings_10x7_BURST001.jpg

Various musings: http://hangfire.net
Re: Craftsman floor jack rebuild [Re: i6pwr] #5113880 05/23/19 07:21 PM
Joined: May 2019
Posts: 182
O
OnTheRocks Offline
Offline
O
Joined: May 2019
Posts: 182
At the heart of almost every piece of hydraulic lift equipment - pallet jack, floor jack, et cetera - there is a simple bottle jack or similar operating system. Fluid in one reservoir, gets pumped into another reservoir, whereby pushing a piston. Almost every one I've seen is the same. Those pieces all have gaskets, seals, and o-rings. These wear items eventually give out, and fluid leaks. Even if you can't find your jack model - and you should be able to since that Craftsman jack is so common that hundreds of thousands were probably sold - you can always take any jack apart, then order the seals, gaskets, and o-rings by diameter size. Parts sellers will have a whatever diameter gasket, if you ask for it. A gasket, seal, or whatever, will work in any and every jack, as long as you are using the correct size.

Re: Craftsman floor jack rebuild [Re: i6pwr] #5113959 05/23/19 08:30 PM
Joined: May 2014
Posts: 1,811
P
philipp10 Offline
Offline
P
Joined: May 2014
Posts: 1,811
oh I'm sure if you had changed the oil on a regular basis you wouldn't be having these issues.....but don't go and have a flush now....much too risky... crush

Last edited by philipp10; 05/23/19 08:30 PM.
Re: Craftsman floor jack rebuild [Re: i6pwr] #5114112 05/23/19 11:52 PM
Joined: Aug 2009
Posts: 2,612
G
Gasbuggy Offline
Offline
G
Joined: Aug 2009
Posts: 2,612
How often should you change the hydrauilic fluid?


Cadillac CTS-V 6.2L 10w30PP
Volvo P1800 Euro L
76 Mercedes 300D Rotella T4
Series III Land Rover VWB
02 Yukon 10w30 PP
01 P71 M1 EP-HM 0W20
95 Accord - 386k. Mobil 2 RIP
Page 1 of 2 1 2
Previous Thread
Index
Next Thread

BOB IS THE OIL GUY® Powered by UBB.threads™