Did the first new-to-me 2010 Camry oil change today. Had to get the long wrench to get the oil pan bolt out. The crush washer was riveted (see pic), the inner side extruded in one direction and the outer edge the other.
Likewise the oil filter cap didn't want to move with reasonable force. Judging by my effort and the length of the wrench, it took about 200 lb/ft to get it off. Once off, I had to pound off the MotivX filter socket from the cap.
More than a few ugga-duggas happened here. Fortunately all threads seem to be OK, no leaks after proper torquing of both and 6 quarts of Mobil 1. Oil filter was a jobber, NAPA proSelect China, not impressed by the wavy pleats, never pulled a Toyota filter off looking like that, but I guess it did its job.
Likewise the oil filter cap didn't want to move with reasonable force. Judging by my effort and the length of the wrench, it took about 200 lb/ft to get it off. Once off, I had to pound off the MotivX filter socket from the cap.
More than a few ugga-duggas happened here. Fortunately all threads seem to be OK, no leaks after proper torquing of both and 6 quarts of Mobil 1. Oil filter was a jobber, NAPA proSelect China, not impressed by the wavy pleats, never pulled a Toyota filter off looking like that, but I guess it did its job.