Post your latest small engine oil change

2005 John Deere G110 - Kohler 25hp V-Twin
Out: Pennzoil Platinum 10w30, Wix 51348
In: Amazon Basics 0w40, Wix 51348


2000 Scag 3-wheel mower - 22hp Kohler V-Twin
Out: SuperTech 15w40, Wix 57035
In: Rotella T5 15w40, Wix 57035

Also changed out hydro fluid with Rotella T5 15w40.
 
Newish Craftsman push mower with a Briggs and Stratton Quantum engine.

Out: Silver and black colored oil. Probably the original.
In: Pennzoil high mileage 10w40

Also cleaned the carburetor and new air filter. Runs like new.
 
Craftsman mower with Briggs easy start series engine. Out 20oz super s flo HD30wt in supertech 5w30 synthetic. Changed over to 5w30 synthetic in all my OPE.
 
I think this is one of my first posts here on Bobs forums and likely first here.

2005 Honda mower HRX217TDA
Out: Honda Factory fill
In: Amsoil SS 10W30

2005 Craftsman Trimmer 4 cycle No. 316.796140
Out: Factory Craftsman oil
In: Amsoil SS 10W30

Both were used for about 3 seasons and put in storage. Sadly I wasn't the best with my maintenance back then and this is their first changes. Besides carb cleaning on the mower and new fuel lines for the trimmer and a 2-cycle blower they run like new.


CTopher
 
MTD push mower with Honda GCV160 engine. I change the oil, air filter and spark plug every two years with the Honda tuneup kit. Years when I don't do a full tuneup I just swap out the air filter.

Out: Pennzoil 5w30
In: Honda 10w30 mower oil
 
New to me (dead) 2005 Toro SR4 Super Recycler with the Briggs & Stratton

Out : no idea + top up of Supertech HD 30w for initial start. Took about 10oz to top off.

In : the rest of the bottle of Supertech HD 30w
 
Honda HRX217HYA Mower
Out: Pennzoil Platinum 5w-30
In: Pennzoil Platinum 5w-30

Honda GC160 on an Excell Power Washer
Out: Pennzoil Platinum 5w-30
In: Pennzoil Platinum 5w-30
 
Craftsman push mower with a Briggs OHV engine.

Out:. Pennzoil High Mileage 10w40
In: Delo CJ4 XLE 10w30 (Leftovers from my Dakota)
 
Murray riding mower


Out: Pennzoil Platinum 5w30 with SLOB and Moly added. L10241 Filter
In: Supertech Synthetic 5w30 with SLOB and Moly added. Purolator L10241 filter

Someday I'll finish using up the stash of SLOB. Finally used last of oil filters from wrecked Geo metro
 
Last edited:
John Deere LX188 17hp Kawasaki

Out: Deere dealership Turf Gard probably and Deere AM107423 filter

In: 5w40 Mobil Delvac 1 and SuperTech ST4967 filter

At a quick glance filters look very similar inside without cutting open to verify specifically.
 
2014 Toro 20334 with the B&G L head

Out: probably factory fill (barely any)

In: 2 flushes of Ace Hardware SAE 30 and Supertech SAE 30 mixed with Supertech 5w30

Bought it for $25. Sold it for $150 an hour later after completing the tune up. No new parts used except oil.
 
Tecumseh 6.75 on a Craftsman deck, picked up off the curb.

Out- Unknown, .5 qt overfilled

In- Supertech 10W-30 conventional

Cleaned the air filter and it started right up, gonna sharpen the blade and sell it for cheap.
 
Changed oil recently in my Craftsman rider with the 21 HP B&S engine with a two year OCI. No oil consumption.

Out: M1 10-30

In: M1 10-30

Filter: MC FL910S
 
Another new to me 2005 Toro SR4 with the Briggs Quantum. This time it was a free toss away.

Out : No idea
In: Supertech HM Syn 5w30

Debating if I want to keep this one or the other one I paid for a month ago.
 
Mtd push mower 140cc powermore engine.

Out. Chevron delo 10w30 synblend or it was advance auto 30 weight/10w30 can't remember

In. Lucas 15w40
 
Last edited:
Back
Top