Recent Topics
Bosch Premium 3410
by QuangTeo - 04/01/20 03:48 AM
Thicker oils are coming back to USA
by Kamele0N - 04/01/20 03:07 AM
misty air coming out of air hose even with water separator?
by motor_oil_madman - 03/31/20 11:22 PM
Post your favorite racing cars
by IMSA_Racing_Fan - 03/31/20 09:40 PM
Air Filters for Chonda 457cc engine
by 92saturnsl2 - 03/31/20 07:59 PM
Share your Hot Toddy recipe
by LoneRanger - 03/31/20 07:24 PM
Aftermarket CV axle boot replacement
by CDX825 - 03/31/20 06:34 PM
A few discounts at Walmart for buying 2 jugs
by jayjr1105 - 03/31/20 06:20 PM
Bumblebee Ahi tuna poke
by atikovi - 03/31/20 06:05 PM
2007 RDX Differential and Transfer Case?
by maverickfhs - 03/31/20 06:02 PM
Tacky additive in bar and chain oil
by TreyT42 - 03/31/20 05:02 PM
How Come Diesel is $2.69 when gas is $1.47 ?
by LoneRanger - 03/31/20 04:42 PM
Bosch Premium 3422 Cut Open
by getawheel - 03/31/20 03:52 PM
AC Went out in my Forester Again
by Miller88 - 03/31/20 03:48 PM
I'm out on the Front Porch
by MolaKule - 03/31/20 03:11 PM
Raybestos rotors - Element3 vs Specialty Truck
by RageOfFury - 03/31/20 02:39 PM
Briggs Stratton Quantum engine surging
by alex_at - 03/31/20 12:53 PM
Are harbor freight generators any good?
by NavyVet88 - 03/31/20 12:37 PM
A picture of me in my youth! :-)
by SLO_Town - 03/31/20 11:18 AM
Newest Members
Rickborn, TreyT42, Abi, Transpections, burgM
71068 Registered Users
Who's Online Now
47 registered members (Bighorn2500, AlienBug, 4WD, antone, 2010Civic, AZjeff, 6 invisible), 1,161 guests, and 21 spiders.
Key: Admin, Global Mod, Mod
Forum Statistics
Forums67
Topics303,527
Posts5,235,882
Members71,068
Most Online4,538
Jan 20th, 2020
Donate to BITOG
Print Thread
Hop To
Page 2 of 15 1 2 3 15
Re: Fords new 7.3 liter engine is a pushrod engine? [Re: double vanos] #5002131 02/05/19 04:01 PM
Joined: Oct 2014
Posts: 14,688
C
CT8 Offline
Offline
C
Joined: Oct 2014
Posts: 14,688
Push rod engines are nicer.


2015 F150 2.7
2018 F350 6.2
Re: Fords new 7.3 liter engine is a pushrod engine? [Re: racin4ds] #5002136 02/05/19 04:10 PM
Joined: Jan 2012
Posts: 5,804
H
hatt Offline
Offline
H
Joined: Jan 2012
Posts: 5,804
Originally Posted by racin4ds
This should be a HORSE of an engine. Fords V10 was only a 6.8L mill if I recall. The Biggest gas truck engine to date was the GM 8.1L I just don't see the need for such a large gas engine that will undoubtedly get horrible economy. Why not just buy a diesel if you require this much towing capability?

My notoriously hated 05 PSD with the 6.0 averaged 15-16-mpg loaded to the gills hauling a 3 horse trailer with living quarters, 3 fat mares, tons of excess junk and other items when we moved from WV to Florida, over 975 miles.

Not everyone hauls 20k lbs every day. A more powerful gasser is the ticket. The operating cost are much higher for a diesel. Back when diesel was cheaper than gas you may have made the numbers work. Now diesel is $.60-.80 higher than gas. Never mind DEF, particulate filters, and all the other nonsense on diesels now.

I also had a 6.0. It was used to pull duel tandam 20k trailers every day. It got less than 10 mpgs pulling a load. I'm going to question your loaded mpg numbers.


2013 F150 5.0, Delo 400 XSP 5W-40, Wix 57502
2010 Camry 2.5, PP 10W-30, Mobil1 M1C-251A
Re: Fords new 7.3 liter engine is a pushrod engine? [Re: double vanos] #5002138 02/05/19 04:12 PM
Joined: Jun 2014
Posts: 64
Z
ZX11Rebel Offline
Offline
Z
Joined: Jun 2014
Posts: 64
The pushrod engine came after OHC engines. So,OHC engines are out of date:)


18 Harley FXLR
15 Ram 5.7 Hemi ZF
07 Pontiac G5GT
07 GMC Canyon 3.7
07 Mustang GT Tr3650
07 Honda Rebel
99 Mazda Protégé ES
99 Kawasaki ZX11
93 ChevyP'up 5.7
75 Sleekcraft 455 olds
63 Cessna Skylane
Re: Fords new 7.3 liter engine is a pushrod engine? [Re: racin4ds] #5002144 02/05/19 04:14 PM
Joined: Dec 2005
Posts: 4,645
0
02SE Offline
Offline
0
Joined: Dec 2005
Posts: 4,645
Originally Posted by racin4ds
The Biggest gas truck engine to date was the GM 8.1L



I guess that depends on your criteria. GM has had 637 CI V8, and 702 CI V12 gas truck engines. Albeit in medium duty trucks.

Re: Fords new 7.3 liter engine is a pushrod engine? [Re: double vanos] #5002146 02/05/19 04:16 PM
Joined: Oct 2006
Posts: 9,580
grampi Offline
Offline
Joined: Oct 2006
Posts: 9,580
Big cubic inch pushrod motors rule!

Re: Fords new 7.3 liter engine is a pushrod engine? [Re: double vanos] #5002161 02/05/19 04:40 PM
Joined: Oct 2011
Posts: 1,966
U
user52165 Offline
Offline
U
Joined: Oct 2011
Posts: 1,966
FWIW - Over 100 million SBC engines have been built............................

and still being built today.

Last edited by user52165; 02/05/19 04:41 PM.
Re: Fords new 7.3 liter engine is a pushrod engine? [Re: double vanos] #5002179 02/05/19 05:05 PM
Joined: Dec 2007
Posts: 908
E
E365 Offline
Offline
E
Joined: Dec 2007
Posts: 908
This will probably be an amazing engine-swap down the road once they hit the junk yards in crashed trucks. Iron block, port injection, 7.3 liters plus an aftermarket twin turbo kit. Massive power and torque!

Last edited by E365; 02/05/19 05:05 PM.

Whatever's on sale...
Re: Fords new 7.3 liter engine is a pushrod engine? [Re: double vanos] #5002184 02/05/19 05:07 PM
Joined: Aug 2017
Posts: 1,265
1
14Accent Offline
Offline
1
Joined: Aug 2017
Posts: 1,265
Looks to be a beast, I would say 500 horse 575 torque are modest estimates. Big displacement, likely long stroke, cast iron block with cross-bolted mains and a gear-driven timing setup with VVT. I dig it.


2013 Chevrolet Volt - Saves enough in fuel to pay for itself!

2007 Chevrolet Impala LT
Re: Fords new 7.3 liter engine is a pushrod engine? [Re: double vanos] #5002192 02/05/19 05:18 PM
Joined: May 2012
Posts: 6,773
DoubleWasp Offline
Offline
Joined: May 2012
Posts: 6,773
Commercial operators are going to love this engine (assuming it proves reliable).


07 Lincoln Navigator M1 0w-40/FU
68 Charger R/T / Supercharged 440 VR1/DBL7349
07 Ram 3500 4x4 / Cummins 6.7 /DBL7349
17 Maserati GranTurismo Cabrio
Re: Fords new 7.3 liter engine is a pushrod engine? [Re: double vanos] #5002209 02/05/19 05:42 PM
Joined: Jan 2004
Posts: 6,545
N
nthach Offline
Offline
N
Joined: Jan 2004
Posts: 6,545
It almost looks like a carbon copy of the SBC too, unless Ford went back into the history books and looked up the 5.0/5.8L OHV V8s they made years ago.

And I thought Ford was a big proponent of overhead cam power too?

Re: Fords new 7.3 liter engine is a pushrod engine? [Re: nthach] #5002222 02/05/19 05:58 PM
Joined: Apr 2008
Posts: 41,825
O
OVERKILL Offline
Offline
O
Joined: Apr 2008
Posts: 41,825
Originally Posted by nthach
It almost looks like a carbon copy of the SBC too, unless Ford went back into the history books and looked up the 5.0/5.8L OHV V8s they made years ago.

And I thought Ford was a big proponent of overhead cam power too?


I don't find it bears any resemblance to the SBC? It doesn't have siamesed ports, if anything I think it looks more like the FR9:
[Linked Image]

Considering the inspiration for the Modular was the 427SOHC, I don't think it would be surprising if their efforts for another pushrod mill resemble the Windsor.

And yes, Ford has put a lot of effort into OHC V8's since the 1990's, but they have brought with them their own suite of issues.


2019 RAM 1500 Sport - Mobil 1 EP 0w-20, FRAM Ultra
2020 Grand Cherokee SRT - Ravenol SSL 0w-40, FRAM Ultra
Re: Fords new 7.3 liter engine is a pushrod engine? [Re: hatt] #5002224 02/05/19 05:59 PM
Joined: Jun 2014
Posts: 2,477
V
Vern_in_IL Offline
Offline
V
Joined: Jun 2014
Posts: 2,477
Originally Posted by hatt
Originally Posted by racin4ds
This should be a HORSE of an engine. Fords V10 was only a 6.8L mill if I recall. The Biggest gas truck engine to date was the GM 8.1L I just don't see the need for such a large gas engine that will undoubtedly get horrible economy. Why not just buy a diesel if you require this much towing capability?

My notoriously hated 05 PSD with the 6.0 averaged 15-16-mpg loaded to the gills hauling a 3 horse trailer with living quarters, 3 fat mares, tons of excess junk and other items when we moved from WV to Florida, over 975 miles.

Not everyone hauls 20k lbs every day. A more powerful gasser is the ticket. The operating cost are much higher for a diesel. Back when diesel was cheaper than gas you may have made the numbers work. Now diesel is $.60-.80 higher than gas. Never mind DEF, particulate filters, and all the other nonsense on diesels now.

I also had a 6.0. It was used to pull duel tandam 20k trailers every day. It got less than 10 mpgs pulling a load. I'm going to question your loaded mpg numbers.


Diesels were literally regulated out of the market! Started with Low Sulfur fuel, idiots didn't want to see Big Rigs rolling coal, and yes diesel should be cheaper than gas.

Last edited by Vern_in_IL; 02/05/19 06:00 PM.
Re: Fords new 7.3 liter engine is a pushrod engine? [Re: nthach] #5002229 02/05/19 06:03 PM
Joined: Jun 2005
Posts: 14,081
bdcardinal Offline
Offline
Joined: Jun 2005
Posts: 14,081
Originally Posted by nthach
It almost looks like a carbon copy of the SBC too, unless Ford went back into the history books and looked up the 5.0/5.8L OHV V8s they made years ago.

And I thought Ford was a big proponent of overhead cam power too?


They are for the most part. However trying to make a tall deck big bore DOHC V8 isn't very do-able in any modern application as far as packaging goes.


2014 Ford Mustang GT Track Pack
1995 Ford Mustang GT

Ford/Mazda Parts Counter
NRA Benefactor Member
Opinions expressed are my own.
Re: Fords new 7.3 liter engine is a pushrod engine? [Re: double vanos] #5002247 02/05/19 06:23 PM
Joined: Apr 2018
Posts: 1,033
J
joekingcorvette Offline
Offline
J
Joined: Apr 2018
Posts: 1,033
I like push rod engines and this looks like a winner! It looks like the spark plugs are easy to change. banana


2005 Chevrolet Corvette
2014 Ford F-150 4x4 supercrew
2014 Jeep Grand Cherokee Limited (wifes)
2012 Honda Civic 4 door (my daily driver)
2007 Lund Tyee Grand Sport Mercury 115HP 9.8HP
Re: Fords new 7.3 liter engine is a pushrod engine? [Re: OVERKILL] #5002253 02/05/19 06:28 PM
Joined: Jun 2005
Posts: 14,081
bdcardinal Offline
Offline
Joined: Jun 2005
Posts: 14,081
Originally Posted by OVERKILL
I don't find it bears any resemblance to the SBC? It doesn't have siamesed ports, if anything I think it looks more like the FR9:
[Linked Image]


slobber the FR9 is so sexy. They have one at the NASCAR Hall of Fame and I was fogging the glass looking at it.


2014 Ford Mustang GT Track Pack
1995 Ford Mustang GT

Ford/Mazda Parts Counter
NRA Benefactor Member
Opinions expressed are my own.
Page 2 of 15 1 2 3 15
Previous Thread
Index
Next Thread

BOB IS THE OIL GUY® Powered by UBB.threads™