Recent Topics
Milwaukee 2485-20 M12 1/4” Right Angle Die Grinder
by The Critic - 10/21/19 12:41 AM
Group 78 Battery Connector Issues
by Falcon_LS - 10/21/19 12:37 AM
Factors that can affect warming up time
by SlavaB - 10/20/19 11:59 PM
A nokian lineup review
by UG_Passat - 10/20/19 11:19 PM
Dealer Oil Change
by HowAboutThis - 10/20/19 10:35 PM
small qty of automitive paint
by danez_yoda - 10/20/19 09:36 PM
2017 Chevy Cruze recommended oil filter
by Electromotive - 10/20/19 09:13 PM
4L80E to Allison filter conversion
by P10crew - 10/20/19 09:03 PM
Pickles and gardenia
by 53' Stude - 10/20/19 09:00 PM
Weird Electrical Problems Due To Bad Ground.
by RayCJ - 10/20/19 08:59 PM
ECOGARD X 4610 CUT OPEN
by 53' Stude - 10/20/19 08:23 PM
FRAM ULTRA 7317 CUT OPEN
by 53' Stude - 10/20/19 08:17 PM
Easy to use free video editor
by Rat407 - 10/20/19 08:11 PM
Best budget tire for 2006 Nissan Pathfinder SE
by Dogred08 - 10/20/19 07:51 PM
Latest on SSD, HDD and USB Drives?
by JHZR2 - 10/20/19 07:43 PM
Oxy Clean On Leather Seats...WoW
by Warstud - 10/20/19 07:22 PM
Winter street biking
by CourierDriver - 10/20/19 06:47 PM
Fram Ultra or Mobil 1 for Jeep JK?
by SkipCam - 10/20/19 06:42 PM
Supertech 5QT Cardboard Thingy
by Gebo - 10/20/19 06:36 PM
Newest Members
whizznbyu, Oildude, JDVW2019, Carlos40A, GeraldT
69624 Registered Users
Who's Online Now
51 registered members (cos, bdcardinal, csandste, carlprop, bubbatime, AdditiveOCD, 3 invisible), 1,019 guests, and 20 spiders.
Key: Admin, Global Mod, Mod
Forum Statistics
Forums67
Topics296,249
Posts5,094,189
Members69,624
Most Online3,532
Jul 30th, 2019
Donate to BITOG
Print Thread
Hop To
Page 4 of 6 1 3 4 5 6
Re: 2000 Toyota Avalon [Re: clinebarger] #4935812 11/26/18 01:37 PM
Joined: Jul 2016
Posts: 1,949
F
FlyNavyP3 Offline
Offline
F
Joined: Jul 2016
Posts: 1,949
That is way more money than I'd expect for 2 low pressure hoses, I too appreciate OE parts, but man they make it tough when simple parts like that are so expensive. Still better than doing the job twice with JUNK aftermarket parts.


Luke
P-3C and P-8A Maritime Weapons and Tactics Instructor, Instructor Tactical Coordinator and Mission Commander
Re: 2000 Toyota Avalon [Re: clinebarger] #4935965 11/26/18 04:48 PM
Joined: Jan 2004
Posts: 5,894
N
nthach Offline
Offline
N
Joined: Jan 2004
Posts: 5,894
I had a local hydraulics shop redo two AC lines for me, he also told me he can do power steering lines with Parker or Aeroquip hose but too many people buy parts store hoses for that.

Re: 2000 Toyota Avalon [Re: FlyNavyP3] #4936120 11/26/18 07:45 PM
Joined: Dec 2013
Posts: 3,702
C
clinebarger Offline OP
OP Offline
C
Joined: Dec 2013
Posts: 3,702
Originally Posted by FlyNavyP3
That is way more money than I'd expect for 2 low pressure hoses, I too appreciate OE parts, but man they make it tough when simple parts like that are so expensive. Still better than doing the job twice with JUNK aftermarket parts.


I have the worst luck with aftermarket parts! Pay once, Cry once!


2001 Chevy Camaro L92/4L80E
2006 Chevy 2500HD LBZ/Allison 1000
2010 Toyota Corolla 2ZR-FE/U341E
2000 Toyota Avalon 1MZ-FE/A541E
Re: 2000 Toyota Avalon [Re: nthach] #4936129 11/26/18 07:54 PM
Joined: Dec 2013
Posts: 3,702
C
clinebarger Offline OP
OP Offline
C
Joined: Dec 2013
Posts: 3,702
Originally Posted by nthach
I had a local hydraulics shop redo two AC lines for me, he also told me he can do power steering lines with Parker or Aeroquip hose but too many people buy parts store hoses for that.


I've had a few made by hydraulic hose shops......They NEVER get them clocked right. I would buy an Edelmann replacement....But they have the same issue with clocking & they use JUNK price-point hose.


2001 Chevy Camaro L92/4L80E
2006 Chevy 2500HD LBZ/Allison 1000
2010 Toyota Corolla 2ZR-FE/U341E
2000 Toyota Avalon 1MZ-FE/A541E
Re: 2000 Toyota Avalon [Re: clinebarger] #4952657 12/15/18 12:40 PM
Joined: Jul 2016
Posts: 1,949
F
FlyNavyP3 Offline
Offline
F
Joined: Jul 2016
Posts: 1,949
How's the Avalon doing?


Luke
P-3C and P-8A Maritime Weapons and Tactics Instructor, Instructor Tactical Coordinator and Mission Commander
Re: 2000 Toyota Avalon [Re: clinebarger] #4952922 12/15/18 08:03 PM
Joined: Dec 2013
Posts: 3,702
C
clinebarger Offline OP
OP Offline
C
Joined: Dec 2013
Posts: 3,702
The engine is ready to go......Still need to reseal the trans.

I just haven't had the time to be honest, Been building a few transmissions on the weekends. I'll keep ya'll updated!


2001 Chevy Camaro L92/4L80E
2006 Chevy 2500HD LBZ/Allison 1000
2010 Toyota Corolla 2ZR-FE/U341E
2000 Toyota Avalon 1MZ-FE/A541E
Re: 2000 Toyota Avalon [Re: clinebarger] #4989080 01/24/19 01:45 AM
Joined: Dec 2013
Posts: 3,702
C
clinebarger Offline OP
OP Offline
C
Joined: Dec 2013
Posts: 3,702
The engine/transaxle is finally ready for install.

[Linked Image]
[Linked Image]


2001 Chevy Camaro L92/4L80E
2006 Chevy 2500HD LBZ/Allison 1000
2010 Toyota Corolla 2ZR-FE/U341E
2000 Toyota Avalon 1MZ-FE/A541E
Re: 2000 Toyota Avalon [Re: clinebarger] #4989420 01/24/19 11:45 AM
Joined: Jun 2006
Posts: 5,387
B
badtlc Offline
Offline
B
Joined: Jun 2006
Posts: 5,387
I'm sure this has already been covered but my wife's family had two 1996 Avalons with the 3.0L. They were exactly the same. The even came off the assembly line together, one right after the other.

My wife's dad meticulously took care of his. Got the oil changed every 3,000 miles without fail and had complete maintenance records to back it up. It still sludged at 130k miles on the odo if i remember right (i inherited this car for its last 40k).

My wife's uncle had the sister car. He was just as anal about the maintenance but he is a big Amsoil guy. He ran SS in it and I'm not sure of the interval, but I think it was 10k. He still owns his to this day with almost 200k and no sludge issues.

I know people say these engines are fine with regular maintenance but I personally do not believe this to be true. I think anyone with these sludger 3.0L V6s would be best using full synthetics if they want to keep the car a while.

Good luck!


2007 Ford Escape XLS 2.3L ATX, M1 AFE 0W20, Fram TG, 167k
2015 Chrysler T&C, 95k+, M1 5W30, Wix OF
2018 Forester Premium 10k+, M1 5W30, EcoGard Syn OF, ST 75W90
Re: 2000 Toyota Avalon [Re: clinebarger] #4989965 01/24/19 09:17 PM
Joined: Jul 2016
Posts: 1,949
F
FlyNavyP3 Offline
Offline
F
Joined: Jul 2016
Posts: 1,949
Looking forward to having this in the car and running. It's looking good. Did you elect to replace the brushes in the alternator as a preventative measure? When I did the timing on Laurens 3MZ for the second time at 180,000 miles I installed new brushes, the original brushes were about 2/3 or maybe a little more worn. I figured that replacing the brushes was cheap insurance against getting stranded with a dead alternator. Ended up selling the car a few months later at 190,000 miles. I always loved how smooth the 3MZ was.


Luke
P-3C and P-8A Maritime Weapons and Tactics Instructor, Instructor Tactical Coordinator and Mission Commander
Re: 2000 Toyota Avalon [Re: clinebarger] #4989985 01/24/19 09:38 PM
Joined: Dec 2013
Posts: 3,702
C
clinebarger Offline OP
OP Offline
C
Joined: Dec 2013
Posts: 3,702
I'm well aware of the issues with the 1MZ-FE, It will be fed Mobil 1 5w30 on a 5,000 mile OCI.

I believe there are other factors to this "sludge" issue, Such as.......If the engine never reaches operating temperature from a malfunctioning thermostat &/or short-tripping.

There was several revisions to the valve cover baffling & the PCV system during the MZ production run. I'm running the latest steel 1MZ-FE/3MZ-FE PCV Valve that screws into the VC instead of the plastic valve & grommet set-up.


2001 Chevy Camaro L92/4L80E
2006 Chevy 2500HD LBZ/Allison 1000
2010 Toyota Corolla 2ZR-FE/U341E
2000 Toyota Avalon 1MZ-FE/A541E
Re: 2000 Toyota Avalon [Re: clinebarger] #4990070 01/25/19 12:16 AM
Joined: Jun 2011
Posts: 1,640
W
wag123 Offline
Offline
W
Joined: Jun 2011
Posts: 1,640
Originally Posted by clinebarger
I believe there are other factors to this "sludge" issue, Such as.......If the engine never reaches operating temperature from a malfunctioning thermostat &/or short-tripping.

I agree.

Re: 2000 Toyota Avalon [Re: clinebarger] #4990248 01/25/19 09:39 AM
Joined: Jun 2006
Posts: 5,387
B
badtlc Offline
Offline
B
Joined: Jun 2006
Posts: 5,387
Originally Posted by clinebarger
I'm well aware of the issues with the 1MZ-FE, It will be fed Mobil 1 5w30 on a 5,000 mile OCI.

I believe there are other factors to this "sludge" issue, Such as.......If the engine never reaches operating temperature from a malfunctioning thermostat &/or short-tripping.

There was several revisions to the valve cover baffling & the PCV system during the MZ production run. I'm running the latest steel 1MZ-FE/3MZ-FE PCV Valve that screws into the VC instead of the plastic valve & grommet set-up.



The one that sludged for us was used as a commuter car for my wife to drive to work. THe drive was 25 miles each way. THe thermostat was always fine and the PCV was still in operating condition. We had it fully checked out when the sludge appeared and everything was working properly. It just sludged.

It was never short tripped. When her father owned the car, his daily commute was 30+ miles each way. That thing cruised great on the highway. So comfortable.


2007 Ford Escape XLS 2.3L ATX, M1 AFE 0W20, Fram TG, 167k
2015 Chrysler T&C, 95k+, M1 5W30, Wix OF
2018 Forester Premium 10k+, M1 5W30, EcoGard Syn OF, ST 75W90
Re: 2000 Toyota Avalon [Re: clinebarger] #4990327 01/25/19 11:13 AM
Joined: Feb 2007
Posts: 1,305
A
Anduril Offline
Offline
A
Joined: Feb 2007
Posts: 1,305
I'd imagine the guy who did 3k oil changes used dino, and the Amsoil guy obviously used synthetic. Could that have been the difference?


2015 Nissan Versa Note 1.6/5MT
2012 Toyota Tacoma 2.7/4AT
2007 Toyota Camry 2.4/5AT
2005 Nissan XTerra 4x4 4.0/6MT
2002 Mustang GT Convertible 4.6/5MT
2009 Kawasaki Vulcan 900
2013 Hyosung ST7
Re: 2000 Toyota Avalon [Re: FlyNavyP3] #4990996 01/25/19 11:31 PM
Joined: Dec 2013
Posts: 3,702
C
clinebarger Offline OP
OP Offline
C
Joined: Dec 2013
Posts: 3,702
Originally Posted by FlyNavyP3
Looking forward to having this in the car and running. It's looking good. Did you elect to replace the brushes in the alternator as a preventative measure? When I did the timing on Laurens 3MZ for the second time at 180,000 miles I installed new brushes, the original brushes were about 2/3 or maybe a little more worn. I figured that replacing the brushes was cheap insurance against getting stranded with a dead alternator. Ended up selling the car a few months later at 190,000 miles. I always loved how smooth the 3MZ was.


You seem to know me at little too well!!
The alternator was sent to a local shop (Fort Worth Starter & Generator) & had new Denso brushes installed, I'm using the alternator off the JDM engine & could have been put directly into service.
Had the same outfit install new Denso contacts & plunger in the starter.


2001 Chevy Camaro L92/4L80E
2006 Chevy 2500HD LBZ/Allison 1000
2010 Toyota Corolla 2ZR-FE/U341E
2000 Toyota Avalon 1MZ-FE/A541E
Re: 2000 Toyota Avalon [Re: clinebarger] #4991386 01/26/19 12:31 PM
Joined: Nov 2006
Posts: 22,581
T
Trav Offline
Offline
T
Joined: Nov 2006
Posts: 22,581
It seems to be coming along great. Would you know if that place sells original Denso brushes, its almost impossible to find any OE brushes and regulators other than Bosch.
Any idea when you will have it in the car? New CV boots and a regrease?


ASE L1, Master. Deutsch Meisterbrief.
Page 4 of 6 1 3 4 5 6
Previous Thread
Index
Next Thread

BOB IS THE OIL GUY® Powered by UBB.threads™