HVAC techs: Help with Aire-flo (Lennox) furnace

[Kruse]

Any HVAC techs, especially Lennox techs with access to part numbers, willing to help a single mom fix her furnace fairly cheap? A lady acquaintance has an older Aire-flo (this is a Lennox brand, right?) that has a dry, noisy inducer fan. Briefly tried to find a part number online to replace it, will try again later. I HAVE NOT SEEN THE MOTOR, so I didn't get any numbers off of it. May have to go to her house to get a look at it. Air-flo model number AF90MPE050U3B. SN 4605J01620. I think the "05J" says it was built in 2005, month of September. Low price is the main factor in this repair guys, so a generic replacement number would be great, but if it's a Lennox proprietary part is needed, so be it.
TIA.

 

[Kansas_Ron]

https://www.repairclinic.com/Repair...7-/New/Lennox-Furnace-is-noisy-or-loud-1

 

[bullwinkle]

Here's one for around $100-
https://hvacpartsoutlet.com/products/lennox-70l60-702111220s-draft-inducer-blower
Might be able to put a new fan motor on the existing blower, a good motor repair shop may be able to help you out. I have a Lennox Pulse 21 myself that seems to nuke the control board occasionally (every 3 years or so), unfortunately most of their parts seem to be OEM only. Good luck!

 

[Zee09]

Great job!

 

[Ursatdx]

I love "Repairclinic.com"
The wifey not so much.


Originally Posted by Kansas_Ron
https://www.repairclinic.com/Repair...7-/New/Lennox-Furnace-is-noisy-or-loud-1