Recent Topics
Alternative oil filters
by GeoffPD - 08/24/19 10:16 PM
PartSource Canada Delvac deal
by Bluestream - 08/24/19 09:57 PM
Chamberlain tractor pto clutch oil
by Jabbo - 08/24/19 09:37 PM
how to get out o2 sensor
by dogememe - 08/24/19 09:18 PM
Should I use a wash and wax for maintenance washes?
by littlehulkster - 08/24/19 08:53 PM
Michelin Rebate
by twouvakind - 08/24/19 08:47 PM
Meguiar's Ultimate Fast Finish.
by irv - 08/24/19 08:27 PM
Fram PH/TG/XG3593a cut open
by SlavaB - 08/24/19 08:12 PM
Supertech vs OEM
by Bettez88 - 08/24/19 08:05 PM
Exxon Mobile Synergy Supreme Friction Modifier
by IndyFan - 08/24/19 07:50 PM
Toyota oil cap funnel
by Patrick0525 - 08/24/19 07:07 PM
STUMPED (2002 BMW X5)
by Kira - 08/24/19 05:43 PM
Turtle Wax Zip wash/wax...garbage!
by gregk24 - 08/24/19 05:41 PM
Does Super Lube Oil make Good Electric Motor Oil
by vortex - 08/24/19 04:40 PM
26 degree temp swing in 24 hours
by gman2304 - 08/24/19 04:12 PM
FEDERATED PG4459F CUT OPEN
by 53' Stude - 08/24/19 03:58 PM
Reverse mortgage questions.
by callbay - 08/24/19 03:45 PM
Moly vs No Moly
by Navi - 08/24/19 03:08 PM
Newest Members
EricTwoCamaros, Subie5w30, Iautox, Mayadi, YachtRocket
69055 Registered Users
Who's Online Now
83 registered members (AdditiveOCD, 2003f7, AZjeff, 53' Stude, Alfred_B, 9 invisible), 1,567 guests, and 21 spiders.
Key: Admin, Global Mod, Mod
Forum Statistics
Forums67
Topics293,754
Posts5,046,147
Members69,055
Most Online3,532
Jul 30th, 2019
Donate to BITOG
Print Thread
Hop To
How copy an existing stair stringer?? #4785736 06/13/18 10:28 AM
Joined: Jan 2003
Posts: 3,267
E
edwardh1 Offline OP
OP Offline
E
Joined: Jan 2003
Posts: 3,267
Outside wooden steps from a small porch, front door down to ground , 5 steps, last step is just about down on the ground level.
last foot that sits in/ on the cement pad that is in the soil has fair amount of rot. 34 years young.
I want to make a copy of the stringer and sister (with nails or bolts) it (or now that I think of it, sister the bottom half. none of it is visible.

whats the best material to get a fair pattern match? I dont know if I can do the rise and run thing with a framing square but maybe I can, on a 2x12.
I made a poster paper copy thats fair, whats next up fpr pattern material cardboard? I need a good pattern as quality 2x12 treated is expensive

Last edited by edwardh1; 06/13/18 10:30 AM.

These products are all new every year?? They are a revolution!!! Razor blades, mens shirts, TVs, wiper blades, gutter guards, hearing aids... according to the ads. But also all new last year
Re: How copy an existing stair stringer?? [Re: edwardh1] #4785799 06/13/18 11:37 AM
Joined: Mar 2017
Posts: 10,413
PimTac Offline
Offline
Joined: Mar 2017
Posts: 10,413
I saw it done once using a roll of butcher paper. They traced the pattern and used thumb tacks to secure the paper. Tape would work as well but you need two stringers. Trace off of the same pattern.


2017 Mazda CX5
Havoline Pro DS 0w20
Roki OEM filter.
Re: How copy an existing stair stringer?? [Re: edwardh1] #4785815 06/13/18 11:50 AM
Joined: May 2009
Posts: 13,302
A
ARCOgraphite Offline
Offline
A
Joined: May 2009
Posts: 13,302
I laid the old one on the new board.


2019 VW Jetta S 6MT OCI#1 5885mi-Castrol Edge Prof? VW508+VW Service Filter; '17 Subaru Crosstrek CVT OC#7 52665mi-Castrol GTX Magnatec 5W20 + SOA Filter
Re: How copy an existing stair stringer?? [Re: edwardh1] #4785826 06/13/18 12:05 PM
Joined: Jan 2017
Posts: 3,116
M
maxdustington Offline
Offline
M
Joined: Jan 2017
Posts: 3,116
You plan to just slap a second stringer to reinforce the first one? You are going to have to change the joist hanger anyway, so if you could pull the old one out and copy it that would be best. However, you may as well just replace it at that point.

I am not sure that you could get a good pattern while it was in place and if you are going to cut a stringer why not just cut a new stringer and do the job correctly?


03 Jetta AWP/09A 210k kms
Edge 0W40 + Mann 719/30
Re: How copy an existing stair stringer?? [Re: edwardh1] #4785854 06/13/18 12:37 PM
Joined: Mar 2017
Posts: 10,413
PimTac Offline
Offline
Joined: Mar 2017
Posts: 10,413
I misread the original post. You say you want to sister the new stringer onto the old?

I would not do this. Get rid of the old and go with new stringers. Also, take care of the ground exposure at the bottom.


2017 Mazda CX5
Havoline Pro DS 0w20
Roki OEM filter.
Re: How copy an existing stair stringer?? [Re: edwardh1] #4785900 06/13/18 01:19 PM
Joined: Feb 2011
Posts: 923
A
AandPDan Offline
Offline
A
Joined: Feb 2011
Posts: 923

Re: How copy an existing stair stringer?? [Re: ARCOgraphite] #4785916 06/13/18 01:38 PM
Joined: Jan 2003
Posts: 3,267
E
edwardh1 Offline OP
OP Offline
E
Joined: Jan 2003
Posts: 3,267
Originally Posted By: ARCOgraphite
I laid the old one on the new board.


OLD one is still in place


These products are all new every year?? They are a revolution!!! Razor blades, mens shirts, TVs, wiper blades, gutter guards, hearing aids... according to the ads. But also all new last year
Re: How copy an existing stair stringer?? [Re: edwardh1] #4786170 06/13/18 07:32 PM
Joined: May 2010
Posts: 10,400
S
spasm3 Online Happy
Online Happy
S
Joined: May 2010
Posts: 10,400
https://www.homedepot.com/p/5-Step-Groun..._-301040023-_-N


You could buy all three , or buy one and copy it onto pressure treated lumber.


13 elantra 78k 5w30 synpwr
03 chevy avalanche 83k synpwr 5w30
17 mazda cx-5 12300 miles m1 0w30
Re: How copy an existing stair stringer?? [Re: edwardh1] #4786268 06/13/18 09:43 PM
Joined: Apr 2012
Posts: 7,083
W
Wolf359 Offline
Offline
W
Joined: Apr 2012
Posts: 7,083
Get the book and do your own. Uneven steps are a trip hazard. Normally you're supposed to measure them out so that the rise for all the steps are uniform. You don't really get that with pre-made stringers as the top or bottom may be too high/low. And yes, you should use joist hangers, that's usually code in most places.

https://www.amazon.com/Advanced-Stair-Stringer-Layout-Methods-ebook/dp/B007URAYO8

Oh and as for trip hazards, I know one landlord that lost a case when a tenant fell on the steps. Said it cost him 60k, 30k for the tenant and 30k for the lawyer. Automatic loss for him as he had uneven steps. Code here is that you're not supposed to have more than 3/8 inch variation in step height. If you measure the whole distance and divide it out, they should all be uniform in height. There's a reason why if you go to a commercial/government building, every step you encounter will be uniform in height. (if not, trip and sue... laugh )

Previous Thread
Index
Next Thread

BOB IS THE OIL GUY® Powered by UBB.threads™