So i did drain and fill on my pilot in singature yesterday, drain 3.5qts and put the same amount back in. Drive the car, got it nice and hot, checked the level as per manual - right on the middle. This morning pulled the dipstick and the level was twice as it should be(?!). I went ahead and started the car, ran through the gears, shut it off and pulled the dipstick - foamy ATF on it ([censored]). Level read between the dots. Foaming was gone in a matter if seconds. Ok, drove the car for a few miles, deives just fine, checked the level again - slightly above min as it was yesterday and no singa of foaming.
My question is - what the heck was that???
My question is - what the heck was that???