Huskvarna Rider gth2248XP

[Convert]

I just purchased the rider and at this time there isn't any Manuals,(seller is moving and is a close friend)so the manuals may show up in the future,
I have some information from the placard under the hood but my question is .
what weight oil to use=== and the quanity.

this unit has a Kawasaski V-twin 22 HP

I did a search on line but couldn't fine what I was looking for.
Any assistance will be helpful.
Thanks TOMB

 

[skyactiv]

Manuel for the Kaw equipped model:

http://www.husqvarna.com/ddoc/HUSO/HUSO2003_USen/HUSO2003_USen_O0302013_.pdf

Gasoline Capacity 5.0 Gallons
and type: Unleaded Regular
Oil Type (API-SF-SJ): SAE 30 (above 32°F)
SAE 5W-30 (below 32°F)
Oil Capacity: W/ Filter: 4.0 Pints
W/O Filter: 3.5 Pints
Spark Plug: Champion
(Gap: .040") RCJ8Y
Ground Speed (MPH): Forward: 0 – 5.8
Reverse: 0 – 2.1
Tire Pressure: Front: 14 PSI
Rear: 10 PSI
Charging System: 16 AMPS @ 3600 RPM
Battery: AMP/HR: 35
MIN. CCA: 280
CASE SIZE: U1R
Blade Bolt Torque: 45–55 FT. LBS.
CONGRATULATIONS on your purchase of a new tractor. It has been designed, engineered and

 

[Convert]

Thank you
TOMB

 

[NH73]

For an oil recommendation, go here: http://www.kawasakienginesusa.com/engine/accessories/kawasaki-4-cycle-engine-oil

Go get a 10w30 HDEO if warranty is a concern, or M1 HM 10w40. Otherwise my ultimate pick would 15w40 for a conventional, 5w40 for a synthetic.

 

[dwendt44]

Kawasaki uses NGK spark plugs.
B&S uses the Champions.

Auto filter Fram TG3614 works well for
any lawn tractor. [censored] or Kaw.


My 2¢