M1-113A bypass valve PSI?

Status
Not open for further replies.
Joined
Mar 29, 2018
Messages
4
Location
PA
Can anyone confirm what the PSI for the bypass valve on a M1-113A filter is? I know there are a few reports that the M1-113 filter was 15-17 PSI but I read one person stating it was bumped to 22 for the 113A and just want to know if anyone can confirm.
 
I figured as much. Kind of grasping at straws here. I need a 22psi bypass valve but I am hesitant to use the PF64 filter due to possible failures.
 
Buy one tear it open and comparo the bypass spring to one from a filter with the bypass value you're after. It is just a spring and its strength can be measured.
 
Originally Posted By: JAYNO20Z24
Can anyone confirm what the PSI for the bypass valve on a M1-113A filter is? I know there are a few reports that the M1-113 filter was 15-17 PSI but I read one person stating it was bumped to 22 for the 113A and just want to know if anyone can confirm.


Did you try calling Mobil Tech Line?
 
Status
Not open for further replies.
Back
Top