Recent Topics
dropped a zip tie in my prius trans
by eljefino. 12/11/18 09:54 PM
2 Cello's - Some talented fellows right here.
by StevieC. 12/11/18 09:49 PM
Something different for sure - Punjabi Celtic
by StevieC. 12/11/18 09:40 PM
Honda eu200i hiccuping @ low idle - fixed
by Jmoney7269. 12/11/18 09:34 PM
Your dealer is here - Humor
by StevieC. 12/11/18 08:46 PM
1994 Honda Civic LX Main Relay-solder
by Gito. 12/11/18 08:43 PM
Winter/Summer Fuel Economy
by RayCJ. 12/11/18 08:33 PM
0w20 oils - NOACK
by superangrypenguin. 12/11/18 08:19 PM
Liqui Moly Special Tec AA 5w20 API SN
by Johnny248. 12/11/18 08:15 PM
Buy a brand new 1966-1977 Ford Bronco
by StevieC. 12/11/18 07:50 PM
2012 Accord,QSUD 5W20,WIX 57356 filter,3K miles
by aquariuscsm. 12/11/18 07:05 PM
Check out this awsome work!
by Chris142. 12/11/18 06:47 PM
200,000 miles
by Marco620. 12/11/18 06:29 PM
2016 s5 filter??
by wantboost. 12/11/18 06:15 PM
Confused on what oil to use on my 2016 s5 0w40
by wantboost. 12/11/18 06:08 PM
AC compressor pulley replacement
by PhuongFU. 12/11/18 05:34 PM
Battery Woofed
by Tdbo. 12/11/18 05:32 PM
Newest Members
tcoffin014, Schm1d, EagleC, Dinka, MechanicGuy
66654 Registered Users
Who's Online Now
80 registered members (aquariuscsm, 2003f7, AMC, Blkstanger, andyd, 14Accent, 6 invisible), 1,411 guests, and 40 spiders.
Key: Admin, Global Mod, Mod
Forum Statistics
Forums67
Topics294,955
Posts4,924,768
Members66,654
Most Online2,553
Oct 27th, 2018
Donate to BITOG
Previous Thread
Next Thread
Print Thread
Hop To
AC Delco PF35 off 1976 350 SBC in K10 truck cut #4691934
03/11/18 08:26 PM
03/11/18 08:26 PM
Joined: Jul 2016
Posts: 1,682
Jacksonville, FL
FlyNavyP3 Offline OP
FlyNavyP3  Offline OP
Joined: Jul 2016
Posts: 1,682
Jacksonville, FL











Luke
P-3C and P-8A Maritime Weapons and Tactics Instructor, Instructor Tactical Coordinator and Mission Commander
Re: AC Delco PF35 off 1976 350 SBC in K10 truck cut [Re: FlyNavyP3] #4691939
03/11/18 08:32 PM
03/11/18 08:32 PM
Joined: Jul 2016
Posts: 1,682
Jacksonville, FL
FlyNavyP3 Offline OP
FlyNavyP3  Offline OP
Joined: Jul 2016
Posts: 1,682
Jacksonville, FL
Off my 1976 K10 Chevy truck with a 350 4bbl. In service for 2 years and a little shy of 2,000 miles. First oil change since I had the oil pan off to install a new oil pump due to a weak bypass spring in the factory pump bearings looked good when i had the pan off. Engine isn't rebuilt but is not original to the truck however it is from a 1976 passenger car according to the stamped pad on the block. Truck sits a lot due to other commitments and not being my daily driver.

Found some carbon as shown in the pleats and some gunk settled out on the bottom of the can but nothing ferrous or scary looking.

Oil in use was Mobil Delvac 1300 15w40. Napa 15w40 and another PF35 went back in and on. Enjoy.


Luke
P-3C and P-8A Maritime Weapons and Tactics Instructor, Instructor Tactical Coordinator and Mission Commander
Re: AC Delco PF35 off 1976 350 SBC in K10 truck cut [Re: FlyNavyP3] #4692167
03/12/18 06:30 AM
03/12/18 06:30 AM
Joined: Jan 2003
Posts: 1,518
Shippensburg, PA
novadude Offline
novadude  Offline
Joined: Jan 2003
Posts: 1,518
Shippensburg, PA
Looks good. Those PF25/PF35 filters have always been a solid bet. Good to see that the construction quality is still good.

Re: AC Delco PF35 off 1976 350 SBC in K10 truck cut [Re: FlyNavyP3] #4692237
03/12/18 07:47 AM
03/12/18 07:47 AM
Joined: Oct 2004
Posts: 8,308
Cincinnati, OH, USA
bullwinkle Offline
bullwinkle  Offline
Joined: Oct 2004
Posts: 8,308
Cincinnati, OH, USA
Looks really good for a carbureted SB filter-need some truck pix too, most of those ('73-'79 GM pickups) here went to the shredder long ago.


06 Ram 3500 CTD 4X4(FG Venturi), 93 GMC C3500 6.2, 89 F-450 7.3, 98 XJ 4.0(XG8A), 05 xB(XG3600), 18 Transit 3.7, 03 Merc Grand Marquis 4.6 2V(XG2)
Re: AC Delco PF35 off 1976 350 SBC in K10 truck cut [Re: bullwinkle] #4693597
03/13/18 02:49 PM
03/13/18 02:49 PM
Joined: Jul 2016
Posts: 1,682
Jacksonville, FL
FlyNavyP3 Offline OP
FlyNavyP3  Offline OP
Joined: Jul 2016
Posts: 1,682
Jacksonville, FL
Originally Posted By: bullwinkle
Looks really good for a carbureted SB filter-need some truck pix too, most of those ('73-'79 GM pickups) here went to the shredder long ago.


I will have to take a few pictures of the truck to share the next time I take it out. It's a nice clean rust free example from out west purchased from the original owners out of Utah. I was pleased with how nice the filter looked and the light carbon in the pleats didn't scare me a bit.


Luke
P-3C and P-8A Maritime Weapons and Tactics Instructor, Instructor Tactical Coordinator and Mission Commander
Re: AC Delco PF35 off 1976 350 SBC in K10 truck cut [Re: FlyNavyP3] #4694123
03/13/18 10:48 PM
03/13/18 10:48 PM
Joined: Oct 2015
Posts: 1,516
Houston, Texas
WellOiled Online content
WellOiled  Online Content
Joined: Oct 2015
Posts: 1,516
Houston, Texas
FlyNavyP3 - I am impressed with how well the filter and oil performed over the OCI. I was curious why you used the HDEO and if this may be part of the great outcome?


2004 Ford Ranger 4.0L V6
Valvoline Advanced Full Synthetic 5W30 + Fram Tough Guard

BOB IS THE OIL GUY® Powered by UBB.threads™