Recent Topics
UOA places
by OilUzer. 12/11/18 12:31 AM
question about kendall and schaeffer 15w40
by thejudges69. 12/10/18 09:39 PM
Apparently we made it on Amsoil?
by Marco620. 12/10/18 09:39 PM
Slight rust inside Carquest 85522
by A_User55555. 12/10/18 09:03 PM
Which AA battery brand is best?
by StevieC. 12/10/18 08:41 PM
HVAC-Evaporator Coil Question
by dkryan. 12/10/18 08:26 PM
EBAY $10 off $30 Members only
by Capt. 12/10/18 08:15 PM
Ran My First Full Road Marathon - Race Report!
by john_pifer. 12/10/18 07:33 PM
Atlas Pinnacle Pristine shingles
by gregk24. 12/10/18 07:24 PM
CZ-97B Warped Plastic Recoil Spring Guide Rod
by billt460. 12/10/18 07:19 PM
to buy or not to buy
by briggyman. 12/10/18 07:09 PM
Strange tire failure - w picture
by Cressida. 12/10/18 06:10 PM
Looking for a budget steam cleaner
by 2008wrx. 12/10/18 05:04 PM
3.3 V-6 in 2017-18 Santa Fe engine concerns?
by blupupher. 12/10/18 05:00 PM
(NEW) NAPA ProSelect 21060 Cut Open
by rooflessVW. 12/10/18 04:19 PM
True or false
by 53' Stude. 12/10/18 04:15 PM
First repair on Jeep
by OVERKILL. 12/10/18 03:06 PM
Eureka vacuum beater bar
by Donald. 12/10/18 03:04 PM
Newest Members
ScvttH, Capt, Maputocar, ESTEBAN, Torch94
66645 Registered Users
Who's Online Now
26 registered members (dogememe, dishdude, 08z06, Falcon_LS, CKN, 5 invisible), 1,060 guests, and 37 spiders.
Key: Admin, Global Mod, Mod
Forum Statistics
Most Online2,553
Oct 27th, 2018
Donate to BITOG
Previous Thread
Next Thread
Print Thread
Hop To
Alisyn Lubricants #4619991
12/31/17 05:57 PM
12/31/17 05:57 PM
Joined: Oct 2016
Posts: 17
Georgia, USA
XL1200RFan Offline OP
XL1200RFan  Offline OP
Joined: Oct 2016
Posts: 17
Georgia, USA
In '77 I started with Mobil 1 in our new SAAB 99, in '78 started using Amsoil in my Ducati Darmah. In the 80's I was working with the folks at Aerospace Lubricants Inc. since they made the Tribolube silicone grease used in the CFM56 VBV actuators that Garrett made for SNECMA. During these conversations I learned they also made the AliSYN line of synthetic automotive lubes, and began using their engine oil, gear oil & specialty lubes in some of my vehicles. (BTW, they have long been advocates of "<0" viscosity oils.)

Of particular interest was their gear oil. I was having corrosion issues "above the oil line" in the Dana 60 front differential of my F-350 while using M1 75W-90 - the cover, housing and ring gear all exhibited light surface corrosion, due to infrequent use and driving with the hubs unlocked most of the time. I mentioned it to ALI and they said the issue was moisture (from condensation in my case) in the axle was reacting with the sulfur in the M1, and their ProGear product would take care of the issue. I picked some up, and the stuff smelled like celery rather than the sulfur smell typical gear oils have and was super thin. They were right; I had no more corrosion above the oil line after the switch.

I mention the story as a way of asking if any other BITOGers have experience with Alisyn products?


2016 F-150 3.5 CE EP 5W-20 MC FL-500S
2014 Volvo XC60 3.2 PP 5W-30 Mann HU9254Y
2003 Chevy Express 2500HD 6.0 M1 EP 5W-30 Ultra XG3506

Re: Alisyn Lubricants [Re: XL1200RFan] #4620275
01/01/18 04:31 AM
01/01/18 04:31 AM
Joined: Jan 2006
Posts: 999
montero1 Offline
montero1  Offline
Joined: Jan 2006
Posts: 999
I tried their oil in my Goldwing and my Jeep, and I will say this: They are not for extended oil interval changes at all. Wear metals spiked in both, TBN was down to nothing, and they sheared pretty bad. Very disappointed. I tried both for 10k in each vehicle, which is what I normally run in both.

'07 Z4 3.0 SI
'08 GL1800
'10 Jeep Rubicon
'10 Corvette
'13 V-Star 1300 Deluxe (Hers)
'13 VFR1200F
'16 Harley Electra Glide Limited
'18 GMC Canyon Denali (Hers)

BOB IS THE OIL GUY® Powered by UBB.threads™