Recent Topics
Back to Basics III
by MolaKule. 12/15/18 05:30 PM
Castrol Edge 0W40 vs. 5W40...Liqui Moly?
by TiGeo. 12/15/18 04:56 PM
Schumacher XCS15 voltage
by sweezy722. 12/15/18 04:19 PM
Solar battery tenders?
by slybunda. 12/15/18 04:10 PM
Bad Fuel Pressure Regulator.
by NICAT. 12/15/18 04:07 PM
Misfire = clogged cat
by Eric Smith. 12/15/18 04:00 PM
Cellphone Reliability
by Warstud. 12/15/18 03:29 PM
No email notification of replies anymore?
by atikovi. 12/15/18 03:07 PM
Crane EE 5301 Humidifier
by maverickfhs. 12/15/18 02:38 PM
I have sinned
by 901Memphis. 12/15/18 01:57 PM
Milwaukee m12 in vanhaus ratchet
by pda1122. 12/15/18 01:19 PM
Klein dikes
by Donald. 12/15/18 01:03 PM
Help Soldering 3.5mm mono microphone plug
by Brybo86. 12/15/18 01:02 PM
Small Trolling Motors
by wings&wheels. 12/15/18 12:49 PM
Toyota Corolla, good and bad?
by jongies3. 12/15/18 12:35 PM
Mixing oils
by bfleeman. 12/15/18 10:51 AM
Ebay 10% off Tech 15% off everything else*.
by demarpaint. 12/15/18 10:39 AM
Newest Members
Spkrdctr, torchredone12, JNG, Edmundo, NEKGuy
66688 Registered Users
Who's Online Now
96 registered members (86lxjunker, anndel, Anduril, -SyN-, 69GTX, A310, 8 invisible), 1,881 guests, and 35 spiders.
Key: Admin, Global Mod, Mod
Forum Statistics
Forums67
Topics295,124
Posts4,928,149
Members66,688
Most Online2,553
Oct 27th, 2018
Donate to BITOG
Previous Thread
Next Thread
Print Thread
Hop To
Page 1 of 3 1 2 3
Change oil on my terminator with fram ultra today #4536744
10/08/17 12:58 AM
10/08/17 12:58 AM
Joined: Jul 2010
Posts: 2,667
Dallas TX
MetalSlug Offline OP
MetalSlug  Offline OP
Joined: Jul 2010
Posts: 2,667
Dallas TX
This is my FIRST Ultra ever in my life.
Was not happy with 3 second start up rattle, I fill much oil and let it soak into media much I can and fill some more , before install. never have any start up rattle after that, but I dint have this problem with Mobil 1 oil filter. this is 1 years 1000 miles oil change. Next oil change will be mobil 1.



NO FRAM OCOD " Orange Can Of DEATH �
03 SVT COBRA 10th anniversary Whipple 600whp M1 5w30 Wix 51372XP
01 Corvette ZO6 stock M1 5w30 / M1-107A
2016 NISSAN TITAN dealer OC daily drive
Re: Change oil on my terminator with fram ultra today [Re: MetalSlug] #4536748
10/08/17 01:12 AM
10/08/17 01:12 AM
Joined: Jul 2010
Posts: 19,308
PNW
ZeeOSix Offline
ZeeOSix  Offline
Joined: Jul 2010
Posts: 19,308
PNW
Originally Posted By: MetalSlug
This is my FIRST Ultra ever in my life.
Was not happy with 3 second start up rattle, I fill much oil and let it soak into media much I can and fill some more , before install. never have any start up rattle after that, but I dint have this problem with Mobil 1 oil filter. this is 1 years 1000 miles oil change. Next oil change will be mobil 1.


The oil galleries are still drained out above the filter mount even though you pre-filled the filter some. If it's quiet after the intial start-up on subsequent start-ups then there's nothing to worry about.

Re: Change oil on my terminator with fram ultra today [Re: MetalSlug] #4536754
10/08/17 01:55 AM
10/08/17 01:55 AM
Joined: Jan 2007
Posts: 17,501
Clovis, CA
Merkava_4 Offline
Merkava_4  Offline
Joined: Jan 2007
Posts: 17,501
Clovis, CA
Originally Posted By: MetalSlug
Was not happy with 3 second start up rattle


Why did you choose the most widely complained about oil since the history of the internet ?

Re: Change oil on my terminator with fram ultra today [Re: Merkava_4] #4536755
10/08/17 01:58 AM
10/08/17 01:58 AM
Joined: Jul 2010
Posts: 2,667
Dallas TX
MetalSlug Offline OP
MetalSlug  Offline OP
Joined: Jul 2010
Posts: 2,667
Dallas TX
Originally Posted By: Merkava_4
Originally Posted By: MetalSlug
Was not happy with 3 second start up rattle


Why did you choose the most widely complained about oil since the history of the internet ?


old OCD kicking in for being too long in BITOG grin

Last edited by MetalSlug; 10/08/17 02:01 AM.

NO FRAM OCOD " Orange Can Of DEATH �
03 SVT COBRA 10th anniversary Whipple 600whp M1 5w30 Wix 51372XP
01 Corvette ZO6 stock M1 5w30 / M1-107A
2016 NISSAN TITAN dealer OC daily drive
Re: Change oil on my terminator with fram ultra today [Re: Merkava_4] #4536756
10/08/17 02:06 AM
10/08/17 02:06 AM
Joined: Jul 2010
Posts: 19,308
PNW
ZeeOSix Offline
ZeeOSix  Offline
Joined: Jul 2010
Posts: 19,308
PNW
Originally Posted By: Merkava_4
Originally Posted By: MetalSlug
Was not happy with 3 second start up rattle


Why did you choose the most widely complained about oil since the history of the internet ?

Any real data that says Mobil 1 is bad? Or is it just armchair oil engineers making stuff up?

Re: Change oil on my terminator with fram ultra today [Re: MetalSlug] #4536787
10/08/17 04:28 AM
10/08/17 04:28 AM
Joined: Sep 2004
Posts: 21,936
Orlando, FL
Mr Nice Offline
Mr Nice  Offline
Joined: Sep 2004
Posts: 21,936
Orlando, FL
Nice Cobra. Yeah lots of people say Mobil 1 is noisy.

Re: Change oil on my terminator with fram ultra today [Re: MetalSlug] #4536798
10/08/17 05:06 AM
10/08/17 05:06 AM
Joined: Jul 2009
Posts: 748
texas
danez_yoda Offline
danez_yoda  Offline
Joined: Jul 2009
Posts: 748
texas
Does it rattle every startup or only the first one after the oil change? What about after sitting for a long time. (5 days for weekend rider) If you get a consistent rattle after a long time the ADBV is not working. Cut it open on the next OCI and see if there are cuts or other deformations on the rubber/silicone media.

If its everytime... I might be tempted to an early OCI to get back to what is working and never change it again. $20 lesson learned.

Re: Change oil on my terminator with fram ultra today [Re: MetalSlug] #4536802
10/08/17 05:13 AM
10/08/17 05:13 AM
Joined: Jul 2009
Posts: 748
texas
danez_yoda Offline
danez_yoda  Offline
Joined: Jul 2009
Posts: 748
texas

[/quote]


How many jacks/stands/supports are in this picture? smile

I see wood planks under front wheels i guess for initial lift. Scissor jack on passenger side, wheels laying down and slid under both sides, two jack stands, floor jack. smile

wow. wink

Re: Change oil on my terminator with fram ultra today [Re: MetalSlug] #4536814
10/08/17 05:48 AM
10/08/17 05:48 AM
Joined: Nov 2009
Posts: 5,126
Houston, Texas
motor_oil_madman Offline
motor_oil_madman  Offline
Joined: Nov 2009
Posts: 5,126
Houston, Texas
Well he probably used the to raise it enough to get the floor Jack under, then a Jack stand on each side. The tires imo are overkill, but hey it is what it is.


2007.5 dodge cummins 6.7 liter. Chevron Delo400 15w40. 7000 mile or 250-300hr intervals.

Re: Change oil on my terminator with fram ultra today [Re: Merkava_4] #4536835
10/08/17 06:17 AM
10/08/17 06:17 AM
Joined: Dec 2002
Posts: 1,614
North Carolina
Rat407 Offline
Rat407  Offline
Joined: Dec 2002
Posts: 1,614
North Carolina
Originally Posted By: Merkava_4
Originally Posted By: MetalSlug
Was not happy with 3 second start up rattle


Why did you choose the most widely complained about oil since the history of the internet ?


It is going to be the most widely complained about oil since it seems to be the most popular oil.

At least you don't have the cold start knock. So far my 5.3 is doing well at 175k miles with it from day 1.


2002 Silverado 5.3 0w-20 AMSOIL
Re: Change oil on my terminator with fram ultra today [Re: motor_oil_madman] #4536868
10/08/17 07:25 AM
10/08/17 07:25 AM
Joined: Jun 2002
Posts: 1,942
Texas
Bud Offline
Bud  Offline
Joined: Jun 2002
Posts: 1,942
Texas
Originally Posted By: motor_oil_madman
Well he probably used the to raise it enough to get the floor Jack under, then a Jack stand on each side. The tires imo are overkill, but hey it is what it is.


More is better than not enough.


2016 Honda Pilot EX-L with NAVI.....Mobil 1 0w20 AFE and Honda OEM Filter
Re: Change oil on my terminator with fram ultra today [Re: danez_yoda] #4536897
10/08/17 07:55 AM
10/08/17 07:55 AM
Joined: Jul 2010
Posts: 2,667
Dallas TX
MetalSlug Offline OP
MetalSlug  Offline OP
Joined: Jul 2010
Posts: 2,667
Dallas TX
Originally Posted By: danez_yoda
Does it rattle every startup or only the first one after the oil change? What about after sitting for a long time. (5 days for weekend rider) If you get a consistent rattle after a long time the ADBV is not working. Cut it open on the next OCI and see if there are cuts or other deformations on the rubber/silicone media.

If its everytime... I might be tempted to an early OCI to get back to what is working and never change it again. $20 lesson learned.





Just first start up after oil change . I knew it normal cause its happen many car I ever change oil . Its just this time it make noise on start up . I always use Mobil 1 oil filter so is preview owner . And it not rattle at first start up after oil change . I pick ultra because Walmart out off Mobil 1 . Was gonna pick k&N . But give ultra a try . Anyway I been cold start 6 time after oil change but no noise .


NO FRAM OCOD " Orange Can Of DEATH �
03 SVT COBRA 10th anniversary Whipple 600whp M1 5w30 Wix 51372XP
01 Corvette ZO6 stock M1 5w30 / M1-107A
2016 NISSAN TITAN dealer OC daily drive
Re: Change oil on my terminator with fram ultra today [Re: MetalSlug] #4536899
10/08/17 07:58 AM
10/08/17 07:58 AM
Joined: Dec 2010
Posts: 3,120
Tennessee
goodtimes Offline
goodtimes  Offline
Joined: Dec 2010
Posts: 3,120
Tennessee
Problems left and right, someone has to start a spreadsheet.

Re: Change oil on my terminator with fram ultra today [Re: danez_yoda] #4536902
10/08/17 08:00 AM
10/08/17 08:00 AM
Joined: Jul 2010
Posts: 2,667
Dallas TX
MetalSlug Offline OP
MetalSlug  Offline OP
Joined: Jul 2010
Posts: 2,667
Dallas TX
Originally Posted By: danez_yoda




How many jacks/stands/supports are in this picture? smile

I see wood planks under front wheels i guess for initial lift. Scissor jack on passenger side, wheels laying down and slid under both sides, two jack stands, floor jack. smile

wow. wink


[/quote]

Lol I know right ? Im over kill here but I seen some bad jack in my life . One day Im work at this old guy shop and while Im under the car . He come over with 2 old tires and put under the car . I was young so I ask him why , He told me that an old tires save his life after his jack stand fail . He told me always put some old tires under the car or extra jack , so I alway did


NO FRAM OCOD " Orange Can Of DEATH �
03 SVT COBRA 10th anniversary Whipple 600whp M1 5w30 Wix 51372XP
01 Corvette ZO6 stock M1 5w30 / M1-107A
2016 NISSAN TITAN dealer OC daily drive
Re: Change oil on my terminator with fram ultra today [Re: MetalSlug] #4536912
10/08/17 08:12 AM
10/08/17 08:12 AM
Joined: Mar 2012
Posts: 804
BerksCounty/Pa.
thorromig Offline
thorromig  Offline
Joined: Mar 2012
Posts: 804
BerksCounty/Pa.
Just came home from being out of town for 5 weeks. Fired the Ram up in signature that has a Fram Ultra on it. Quiet as can be the motor was immediately. My vehicles luv & perform flawlessly with the Fram Ultras -- only filter I will use unless something better comes around for a better price -- good luck with that happening!!!


00 Dodge Ram 5.2L 4x4 Edge 10W30 FU (91K)
08 Acura TL Type S 3.5L PUPP 5W20 FU (101K)
17 Jetta TSI SE 1.4L Turbo - Edge 0W40 FU (Hers) (4K)
Page 1 of 3 1 2 3

BOB IS THE OIL GUY® Powered by UBB.threads™