I have run Honda MT Fluid I and Honda MT Fluid II. Honda MT Fluid II was a big improvement especially in below freezing temperatures,shifts were much smoother. There was a big difference in viscosity of the two. Honda MT I being around 11.2 viscosity and II at around 7.7 viscosity based on VAO. However I was surprised that Honda MT I sheared quite quickly from 11.2 to 6.6 in 20K miles based on UOA. Don't have any idea of what Honda MT II shears to in a 20K mile use, but frankly I am somewhat concerned if there is a similar viscosity shear.
Delco Synchromesh Friction Modified MT Fluid has been reported in forums to work quite well in a Honda MT. There is a lack of UOA on new fluid or used Delco Synchromesh Friction Modified MT Fluid.
Any one know what the viscosity of virgin Delco Synchromesh Friction Modified MT Fluid?
Or, have a UOA of Delco Synchromesh Friction Modified MT Fluid?
Delco Synchromesh Friction Modified MT Fluid has been reported in forums to work quite well in a Honda MT. There is a lack of UOA on new fluid or used Delco Synchromesh Friction Modified MT Fluid.
Any one know what the viscosity of virgin Delco Synchromesh Friction Modified MT Fluid?
Or, have a UOA of Delco Synchromesh Friction Modified MT Fluid?