Recent Topics
Fuchs Titan ATF 6400
by Chuckh - 02/27/20 12:52 PM
2018 Ram 2500 with 21k miles. Delo 400 XSP 5w40
by bigbadbowtie - 02/27/20 11:08 AM
For those always asking about tiny Computers
by jayjr1105 - 02/27/20 11:05 AM
Original 2016 VW Passat cabin filter
by Vaca - 02/27/20 11:02 AM
Original 2016 VW Passat air filter
by Vaca - 02/27/20 10:54 AM
Napa Exceptional Customer Service
by Fitz98 - 02/27/20 10:38 AM
Astra 400 ?
by WyrTwister - 02/27/20 09:58 AM
Will thinner oil damage anything when it is burned?
by Fordiesel69 - 02/27/20 09:38 AM
Old news for Hyundai/Kia?
by Farnsworth - 02/27/20 09:33 AM
Looking for AA 25% off coupon code.
by JustChuck - 02/27/20 09:17 AM
New to the LS460 and The World Of Lexus. Questions!
by gr8gatzby - 02/27/20 08:41 AM
New old guy back.
by BJD2020 - 02/27/20 07:45 AM
Help me Decide
by Gebo - 02/27/20 07:36 AM
FWD - Death traps with miss matched tires.
by Fordiesel69 - 02/27/20 07:13 AM
Napa Gold Sale
by Toto - 02/27/20 06:52 AM
2016 or 17 Honda CR-V
by Loogie - 02/27/20 05:20 AM
RIP Clive Cussler
by PimTac - 02/27/20 04:48 AM
Pirelli Cinturato P7 Allseason PLUS "II"
by Char Baby - 02/27/20 03:31 AM
CCI clean .22 ammo - polymer coated HV
by Shannow - 02/27/20 03:23 AM
Newest Members
Scotts994Runner, Bu33leGutz, splitthebreak, shadango, JimNastic316
70808 Registered Users
Who's Online Now
110 registered members (53' Stude, 2010Civic, 2015_PSD, 1978elcamino, AndyB, Amenhotep, 7 invisible), 2,188 guests, and 17 spiders.
Key: Admin, Global Mod, Mod
Forum Statistics
Forums67
Topics301,990
Posts5,206,957
Members70,808
Most Online4,538
Jan 20th, 2020
Donate to BITOG
Print Thread
Hop To
Page 1 of 2 1 2
MC FL-910S CUT OPEN, 2013 Fiesta #4113396 06/02/16 01:04 PM
Joined: Mar 2015
Posts: 14,681
53' Stude Online Content OP
OP Online Content
Joined: Mar 2015
Posts: 14,681
So, this MC FL-910S is off a 2013 Ford Fiesta of a friends. Was put on at a dealer near me 6,xxx ago with MC 5w20 blend. Looks ok to me and steel center tube now has louvers I see smile












2009 Toyota Camry LE

161,669 miles

Valvoline Maxlife Synthetic 5w20 Dexos 1 Gen 2 SN+
Fram tough guard 4386 filter
Re: MC FL-910S CUT OPEN, 2013 Fiesta [Re: 53' Stude] #4113401 06/02/16 01:08 PM
Joined: Mar 2008
Posts: 9,377
S
slacktide_bitog Online Content
Online Content
S
Joined: Mar 2008
Posts: 9,377
Very similar, if not identical to, a PL10241. Most likely made December 22, 2015.

What did you replace it with, and what is your intended OCI?

Re: MC FL-910S CUT OPEN, 2013 Fiesta [Re: 53' Stude] #4113407 06/02/16 01:11 PM
Joined: Jul 2015
Posts: 3,772
A
AirgunSavant Offline
Offline
A
Joined: Jul 2015
Posts: 3,772
Thanks for the pictures.
Looks like the oil could have hung in there for awhile longer!

Re: MC FL-910S CUT OPEN, 2013 Fiesta [Re: 53' Stude] #4113411 06/02/16 01:16 PM
Joined: Oct 2008
Posts: 14,391
S
Sayjac Offline
Offline
S
Joined: Oct 2008
Posts: 14,391
Looks real good to me at 6k miles, louvers and all. laugh Thinking Fiesta engine pretty clean at this point based on the pics.

While perhaps similar to the PL10241 in some ways (centertube design now, silicone adbv), the topic filter uses thread end bypass, Puro uses dome end. Just as information, not recommendation. Frankly either bypass set up works for me.

Thanks for c&p.

Re: MC FL-910S CUT OPEN, 2013 Fiesta [Re: 53' Stude] #4113413 06/02/16 01:19 PM
Joined: Mar 2015
Posts: 14,681
53' Stude Online Content OP
OP Online Content
Joined: Mar 2015
Posts: 14,681
Gang: I put in some PP 5w30 and a tough guard 3614 and said to him "go to 7,500 miles". So that's the plan for him and his new car. He does 70/30% highway to city driving. Car has 32,560 miles on it now. He bought it with 30,000


2009 Toyota Camry LE

161,669 miles

Valvoline Maxlife Synthetic 5w20 Dexos 1 Gen 2 SN+
Fram tough guard 4386 filter
Re: MC FL-910S CUT OPEN, 2013 Fiesta [Re: Sayjac] #4113415 06/02/16 01:22 PM
Joined: Apr 2008
Posts: 13,876
M
Miller88 Offline
Offline
M
Joined: Apr 2008
Posts: 13,876
Didn't notice any tears - that seemed to be a thing for a while.


Originally Posted By: Sayjac
Looks real good to me at 6k miles, louvers and all. laugh Thinking Fiesta engine pretty clean at this point based on the pics.

While perhaps similar to the PL10241 in some ways (centertube design now, silicone adbv), the topic filter uses thread end bypass, Puro uses dome end. Just as information, not recommendation. Frankly either bypass set up works for me.

Thanks for c&p.


The 1.6L non-turbo engine is port injected and uses a timing belt so it's pretty easy on oil!


18 Forester 2.5I 6M
00 Jeep XJ
01 F-350 4x4 5M
Re: MC FL-910S CUT OPEN, 2013 Fiesta [Re: 53' Stude] #4113428 06/02/16 01:32 PM
Joined: Mar 2015
Posts: 14,681
53' Stude Online Content OP
OP Online Content
Joined: Mar 2015
Posts: 14,681
Miller88: thanks for the info on that sir smile


2009 Toyota Camry LE

161,669 miles

Valvoline Maxlife Synthetic 5w20 Dexos 1 Gen 2 SN+
Fram tough guard 4386 filter
Re: MC FL-910S CUT OPEN, 2013 Fiesta [Re: 53' Stude] #4113541 06/02/16 04:30 PM
Joined: Jan 2009
Posts: 14,539
T
tig1 Offline
Offline
T
Joined: Jan 2009
Posts: 14,539
I use the FL910 on my Focus and do 10K OCIs. The filters I have cut opened always looked fine.


2007 Ford Fusion 254,000 miles
M1 5-20HM
2017 Ford Fusion 86K
M1 0-20EP
10,000 mile OCIs on both engines
M1 ATF and M1 LV HP ATF
M1 10-30 in all OPE
MC filters

Re: MC FL-910S CUT OPEN, 2013 Fiesta [Re: 53' Stude] #4113548 06/02/16 04:43 PM
Joined: Apr 2012
Posts: 11,816
wemay Offline
Offline
Joined: Apr 2012
Posts: 11,816
Your posts will be valuable for years to come car51. Many thanks as always.


19 VW Passat Wolfsburg TSI (VW Genuine 0W-20+OEM)
13 Hyundai Santa Fe Sport 2.0T (Shell RGT 5W-30+OEM)
Re: MC FL-910S CUT OPEN, 2013 Fiesta [Re: 53' Stude] #4113550 06/02/16 04:53 PM
Joined: Oct 2015
Posts: 1,796
W
WellOiled Offline
Offline
W
Joined: Oct 2015
Posts: 1,796
car51 - very nice cut & post. Thanks.


Mazda 6
Factory fill
Re: MC FL-910S CUT OPEN, 2013 Fiesta [Re: 53' Stude] #4113565 06/02/16 05:35 PM
Joined: Apr 2014
Posts: 2,007
Bud_One Offline
Offline
Joined: Apr 2014
Posts: 2,007
Looks great like all the 910s I've used and cut before.
One of my fav oil filters.
Thanks for the cut and post car51 ! thumbsup


20 Pilot LX - Factory Fill
14 Civic LX Sedan- Castrol Mag 0W-20,XG7317
05 Chevy Crew Cab 2500HD- QSUD 10W-30,PF61E
97 Accord EX Wagon- Napa PPSB 5W-30,Napa 21334
Re: MC FL-910S CUT OPEN, 2013 Fiesta [Re: 53' Stude] #4113603 06/02/16 06:23 PM
Joined: Jun 2014
Posts: 3,236
S
SirTanon Offline
Offline
S
Joined: Jun 2014
Posts: 3,236
Looks good! Pretty standard for an FL910s, IMHO, except for the new louvered center tube.

Doesn't seem to have suffered for it. I agree about the oil looking like it could have gone longer.


2013 Nissan Altima SV - 2.5 liter/CVT - 125,000mi
2014 Nissan Altima SL - 2.5 liter/CVT - 68,000mi
2010 Ford Fusion - 274k mi - SOLD
Re: MC FL-910S CUT OPEN, 2013 Fiesta [Re: Sayjac] #4113647 06/02/16 07:34 PM
Joined: May 2014
Posts: 1,129
T
Tony10s Offline
Offline
T
Joined: May 2014
Posts: 1,129
Originally Posted By: Sayjac
Looks real good to me at 6k miles, louvers and all. laugh Thinking Fiesta engine pretty clean at this point based on the pics.

While perhaps similar to the PL10241 in some ways (centertube design now, silicone adbv), the topic filter uses thread end bypass, Puro uses dome end. Just as information, not recommendation. Frankly either bypass set up works for me.

Thanks for c&p.


+1

Filter looks good ... As always, thank you for the C&P, car51. smile

Re: MC FL-910S CUT OPEN, 2013 Fiesta [Re: 53' Stude] #4113673 06/02/16 07:58 PM
Joined: Jul 2015
Posts: 1,025
B
Branson304 Offline
Offline
B
Joined: Jul 2015
Posts: 1,025
Good looking filter! Thanks for the cut & post.

Re: MC FL-910S CUT OPEN, 2013 Fiesta [Re: Miller88] #4113695 06/02/16 08:31 PM
Joined: Jul 2008
Posts: 9,808
C
crazyoildude Offline
Offline
C
Joined: Jul 2008
Posts: 9,808
I see Motorcraft went with the louvers my next filter for all the fords in my life will be the ultra unless i hear startup noise.

Page 1 of 2 1 2
Previous Thread
Index
Next Thread

BOB IS THE OIL GUY® Powered by UBB.threads™