Best of all USA online does not charge taxes.
13% off any online product
13% off any online product
Battery powered impact wrenches for automotive
- Thread starter Stewie
- Start date
- Status
i have 2 1/4 inch chuck 12v craftsman impact drivers, i use those alot.
2 19.2 volt craftsman drills, one is a regular drill, the other is a 90 degree.
I also have 19.2 1/2 impact, use it a lot.
I like craftsman because its reliable and doesn't empty your savings.
2 19.2 volt craftsman drills, one is a regular drill, the other is a 90 degree.
I also have 19.2 1/2 impact, use it a lot.
I like craftsman because its reliable and doesn't empty your savings.
Originally Posted By: Black_Thunder
i have 2 1/4 inch chuck 12v craftsman impact drivers, i use those alot.
2 19.2 volt craftsman drills, one is a regular drill, the other is a 90 degree.
I also have 19.2 1/2 impact, use it a lot.
I like craftsman because its reliable and doesn't empty your savings.
Can it take out lugnuts?
i have 2 1/4 inch chuck 12v craftsman impact drivers, i use those alot.
2 19.2 volt craftsman drills, one is a regular drill, the other is a 90 degree.
I also have 19.2 1/2 impact, use it a lot.
I like craftsman because its reliable and doesn't empty your savings.
Can it take out lugnuts?
Originally Posted By: Stewie
Originally Posted By: Black_Thunder
i have 2 1/4 inch chuck 12v craftsman impact drivers, i use those alot.
2 19.2 volt craftsman drills, one is a regular drill, the other is a 90 degree.
I also have 19.2 1/2 impact, use it a lot.
I like craftsman because its reliable and doesn't empty your savings.
Can it take out lugnuts?
Ones that are rusted on a boat trailer or over tightened by an ape posing as a mechanic?
Originally Posted By: Black_Thunder
i have 2 1/4 inch chuck 12v craftsman impact drivers, i use those alot.
2 19.2 volt craftsman drills, one is a regular drill, the other is a 90 degree.
I also have 19.2 1/2 impact, use it a lot.
I like craftsman because its reliable and doesn't empty your savings.
Can it take out lugnuts?
Ones that are rusted on a boat trailer or over tightened by an ape posing as a mechanic?
I have a couple of these Dewalts.
http://dewalt.com/tools/cordless-impact-driverswrenches-impact-drivers-dcf886d2.aspx
I didn't buy them for use with lug nuts,but they work great in that application.
My boat trailer and RV spec 95ft-lbs for lug nut torque.
These Dewalts barely hesitate,they just buzz the nuts right off.
http://dewalt.com/tools/cordless-impact-driverswrenches-impact-drivers-dcf886d2.aspx
I didn't buy them for use with lug nuts,but they work great in that application.
My boat trailer and RV spec 95ft-lbs for lug nut torque.
These Dewalts barely hesitate,they just buzz the nuts right off.
Originally Posted By: Stewie
Originally Posted By: Black_Thunder
i have 2 1/4 inch chuck 12v craftsman impact drivers, i use those alot.
2 19.2 volt craftsman drills, one is a regular drill, the other is a 90 degree.
I also have 19.2 1/2 impact, use it a lot.
I like craftsman because its reliable and doesn't empty your savings.
Can it take out lugnuts?
yes i've used mine several times for removing lugnuts, sometimes it grunts a little on lugnuts that haven't been taken off in awhile or if the studs are little rusty etc. but it does a decent job most of the time.
Originally Posted By: Black_Thunder
i have 2 1/4 inch chuck 12v craftsman impact drivers, i use those alot.
2 19.2 volt craftsman drills, one is a regular drill, the other is a 90 degree.
I also have 19.2 1/2 impact, use it a lot.
I like craftsman because its reliable and doesn't empty your savings.
Can it take out lugnuts?
yes i've used mine several times for removing lugnuts, sometimes it grunts a little on lugnuts that haven't been taken off in awhile or if the studs are little rusty etc. but it does a decent job most of the time.
Originally Posted By: Black_Thunder
Originally Posted By: Stewie
Originally Posted By: Black_Thunder
i have 2 1/4 inch chuck 12v craftsman impact drivers, i use those alot.
2 19.2 volt craftsman drills, one is a regular drill, the other is a 90 degree.
I also have 19.2 1/2 impact, use it a lot.
I like craftsman because its reliable and doesn't empty your savings.
Can it take out lugnuts?
yes i've used mine several times for removing lugnuts, sometimes it grunts a little on lugnuts that haven't been taken off in awhile or if the studs are little rusty etc. but it does a decent job most of the time.
Originally Posted By: Stewie
Originally Posted By: Black_Thunder
i have 2 1/4 inch chuck 12v craftsman impact drivers, i use those alot.
2 19.2 volt craftsman drills, one is a regular drill, the other is a 90 degree.
I also have 19.2 1/2 impact, use it a lot.
I like craftsman because its reliable and doesn't empty your savings.
Can it take out lugnuts?
yes i've used mine several times for removing lugnuts, sometimes it grunts a little on lugnuts that haven't been taken off in awhile or if the studs are little rusty etc. but it does a decent job most of the time.
You guys were right.
Tried and failed big time, impact driver can't torque out salty lug nuts
Time to bring the big guns.
Gonna buy one of these
https://www.amazon.ca/gp/product/B00WJA1J68
Tried and failed big time, impact driver can't torque out salty lug nuts
Time to bring the big guns.
Gonna buy one of these
https://www.amazon.ca/gp/product/B00WJA1J68
Originally Posted By: Vikas
are you aware that it comes with no battery and no charger?
Yeah bare just how I like women
are you aware that it comes with no battery and no charger?
Yeah bare just how I like women
Last edited:
- Status
