Hi,
The rubber boot for the tie-rod on my 01 acura integra tore. I am going to replace the boot next weekend and need some grease suggestions.
i found these two, what do you think?
http://www.amazon.com/Super-Lube-21030-S...rds=moly+grease
http://www.amazon.com/Valvoline-VV985-Sy...rds=moly+grease
At home i have:
mobil 1 synthetic grease (i used this red goop on my upper control arm ball joint and the rubber boot is all moist)
napa sil-glyde
3m silicone paste
Please let me know what is appropriate in my application. Thanks
The rubber boot for the tie-rod on my 01 acura integra tore. I am going to replace the boot next weekend and need some grease suggestions.
i found these two, what do you think?
http://www.amazon.com/Super-Lube-21030-S...rds=moly+grease
http://www.amazon.com/Valvoline-VV985-Sy...rds=moly+grease
At home i have:
mobil 1 synthetic grease (i used this red goop on my upper control arm ball joint and the rubber boot is all moist)
napa sil-glyde
3m silicone paste
Please let me know what is appropriate in my application. Thanks
Last edited: