Recent Topics
Fan falls during race against the Freeze
by Skid
Yesterday at 11:40 PM
Amsoil 75-90 GL-4
by Bullet
Yesterday at 08:59 PM
Filters life -
by NStuart
Yesterday at 08:46 PM
2011 F150-5.0V8 Kendall GT1 5W-20-9690 miles
by AITG
Yesterday at 08:42 PM
Aisin DW-1 ATF specs?
by Coprolite
Yesterday at 08:40 PM
Two Puro Classic Air Filters for Mustang FAR
by Nyogtha
Yesterday at 08:30 PM
Brought home this beauty (new half-ton Sierra)
by glock19
Yesterday at 08:03 PM
Oil Filters in 2017?
by gryffinwings
Yesterday at 07:27 PM
Beck/Arnley
by Fafahead
Yesterday at 06:25 PM
Wear vs. oil-filter efficiency: SAE/Amsoil paper
by Gokhan
Yesterday at 06:25 PM
Medical field options
by ram_man
Yesterday at 06:20 PM
Rotella T15W40 22K on the oil (making metal)
by A310
Yesterday at 05:58 PM
Edge 5w50
by Birdman476
Yesterday at 05:17 PM
Raising Vehicle
by mickalo
Yesterday at 04:49 PM
Who peforms the service on your car?
by Leo99
Yesterday at 04:21 PM
truck maintenance suggestions?
by TheKracken
Yesterday at 04:16 PM
Moments from disaster.. share your stories
by L_Sludger
Yesterday at 03:38 PM
Looking for a new chain saw.
by Syntheticuser
Yesterday at 02:47 PM
Delo XLE 10W30 vs Delvac 1300 10W30 - Explain This
by George7941
Yesterday at 02:43 PM
Oil catch can opinions
by jkasch
Yesterday at 02:40 PM
Newest Members
perplexed, TroyHayesDoyle, blueeyedme, anomalia, pack_run
61982 Registered Users
Who's Online
45 registered (carlprop, bdcardinal, bubbatime, Bailes1992, 2009Edge, bbhero, 4 invisible), 1481 Guests and 20 Spiders online.
Key: Admin, Global Mod, Mod
Forum Stats
61982 Members
66 Forums
267089 Topics
4417475 Posts

Max Online: 3590 @ 01/24/17 08:07 PM
Donate to BITOG
Page 1 of 2 1 2 >
Topic Options
#3393239 - 06/09/14 05:47 PM 2001 Jeep GC 4.0 with Rotella T6 5679 miles
Donald Offline


Registered: 03/21/04
Posts: 18721
Loc: Upstate NY
The continuing saga of my reman 4.0 engine. The engine runs fine, decent mileage, no smoke.

Polaris flagged the lead as abnormal (orange) and the oxidation critical (red).

(first to last)

Html:
Test#	1	2	3	4	5
Mileage	9622	5184	5606	5334	5679					
Iron 	146	43	26	28	55   
Chrom 	4	1	1	1	1   
Nickel	1	0	0	0	0   
Alum 	4	1	1	1	2   
Copper  23	12	16	20	24
Lead    15	8	4	3	47 
Tin     2	1	1	1	2
Cadmi   0	0	0	0	0	
Silv    0	0	0	0	0 
Vanad   0	0	0	0	0
Silicon 25	12	13	8	12 
Sodiu   18	6	6	9	15 
Potas   6	1	5	0	0 
Titan   0	1	0	0	0 
Moly    61	58	67	62      61
Antim   1	0	0	1	0 
Mang    2	0	0	0	0 
Lith    0	0	0	0	0
Boron   280	163	30	21	23	
Magn  	14	14	892	1041	1049	
Calc  	3611	2651	1008	814	737
Bari   	0	0	0	0	0
Phos	772	723	868	942	921  
Zinc  	923	864	1103	1189	1143
Fuel	<1	<1	2.2	2.0	<1
Soot	<.1	<.1	<.1	<.1	<.1
Water	<.1	<.1	<.1	<.1	<.1
[email protected]	11.1	10.2	12.9	13.3	13.5
TBN   	3.4	4.47	4.22	NES	4.13	
Oxi    	20	25	17	NES	30
Nit     16	12	13	NES	14  


Test#1 PU
Test#2 PU
Test#3 T6
Test#4 T6
Test#5 T6



Obviously the sharp jump in lead is a concern. Copper + lead = bearing failure.

Current change is PP (old formulation).




Edited by Donald (06/09/14 05:49 PM)
_________________________
2015 Subaru Forester 2.5 engine/CVT
2015 Ford F250 w/Powerstroke
2016 Subaru Crosstrek CVT (wife's)


Top
#3393253 - 06/09/14 06:01 PM Re: 2001 Jeep GC 4.0 with Rotella T6 5679 miles [Re: Donald]
actionstan Offline


Registered: 05/22/13
Posts: 488
Loc: Ohio
If its a reman, does it have a warranty? If so I might bring it up with the shop that did it/company that supplied the engine, just to see what they say. Those seem like high/inconsistent numbers, I would personally be a little worried.
_________________________
1999 Saturn SL1
2013 KIA Forte

Top
#3393259 - 06/09/14 06:06 PM Re: 2001 Jeep GC 4.0 with Rotella T6 5679 miles [Re: Donald]
NHGUY Offline


Registered: 10/09/11
Posts: 4803
Loc: USA
Factory rebuilt? Marshall engine?

Top
#3393260 - 06/09/14 06:07 PM Re: 2001 Jeep GC 4.0 with Rotella T6 5679 miles [Re: Donald]
Donald Offline


Registered: 03/21/04
Posts: 18721
Loc: Upstate NY
The reman engine has almost 60K miles on it. Way past the warranty I was given.

Should I consider any action? Even if I knew which bearing was failing what would I do?
_________________________
2015 Subaru Forester 2.5 engine/CVT
2015 Ford F250 w/Powerstroke
2016 Subaru Crosstrek CVT (wife's)


Top
#3393280 - 06/09/14 06:26 PM Re: 2001 Jeep GC 4.0 with Rotella T6 5679 miles [Re: Donald]
Kuato Offline


Registered: 10/23/05
Posts: 6469
Loc: Colorado
Tough question, what to do....T6 should be giving great wear but there's obviously something going on within the engine. You could always try replacing the bearings and see what happens.

Shot in the dark? I'd consider calling the reman company, and find out the specifications on the rebuild to insure they used the right sized bearings; if they were too thick, making the clearances too tight, then you might expect heavy wear, at least until they were back to "normal" clearances.
_________________________
Oil condition is speculation until a UOA is performed.

2013 F150 5.0 4x4 SuperCab 63k on Amsoil

Thick vs Thin test: 6k / 43k miles complete


Top
#3393291 - 06/09/14 06:36 PM Re: 2001 Jeep GC 4.0 with Rotella T6 5679 miles [Re: Donald]
901Memphis Offline


Registered: 08/14/10
Posts: 12527
Loc: Northern Kentucky
Switch to a 10w30 conventional like PYB and see that lead drop.
_________________________
2002 Buick Century 130k - Built 4T65e(Maxlife) - Edge 0w40 + Fram XG3980
1998 Nissan Altima 337k - 5MT - M1 HM 5w30/Fram Ultra XG7317+MOS+ATP 205

Top
#3393303 - 06/09/14 06:47 PM Re: 2001 Jeep GC 4.0 with Rotella T6 5679 miles [Re: Kuato]
actionstan Offline


Registered: 05/22/13
Posts: 488
Loc: Ohio
Originally Posted By: Kuato
Tough question, what to do....T6 should be giving great wear but there's obviously something going on within the engine. You could always try replacing the bearings and see what happens.

Shot in the dark? I'd consider calling the reman company, and find out the specifications on the rebuild to insure they used the right sized bearings; if they were too thick, making the clearances too tight, then you might expect heavy wear, at least until they were back to "normal" clearances.


If the bearings go back to "normal clearances" wouldn't they at that point be worn, along with the crank, and highly scuffed? I think that would then cause quicker wear, and eventually knocking because loss of oil pressure. The bearing and crank surfaces need to remain smooth.. if clearances were too tight.. I don't think this would be possible.
_________________________
1999 Saturn SL1
2013 KIA Forte

Top
#3393389 - 06/09/14 08:02 PM Re: 2001 Jeep GC 4.0 with Rotella T6 5679 miles [Re: Donald]
Chris142 Online   content


Registered: 06/05/03
Posts: 15202
Loc: apple valley, ca
bump it up to 15w40.lets see what that does
_________________________
02 Wrangler super-s 10w30
87 F250 proline 15w40
04 Tahoe super-s 5w30
Z400 Lucas 10w30
KLR250 Maxima 10w40
Can am maveric edge 5w40

Top
#3393398 - 06/09/14 08:08 PM Re: 2001 Jeep GC 4.0 with Rotella T6 5679 miles [Re: Donald]
Eddie Offline


Registered: 12/07/03
Posts: 8741
Loc: Florida, Cape Coral
Over reacting to one OCI. Check again after a 5-6K OCI.
_________________________
CX5 Touring 2.5L :-)

Top
#3393423 - 06/09/14 08:35 PM Re: 2001 Jeep GC 4.0 with Rotella T6 5679 miles [Re: 901Memphis]
Donald Offline


Registered: 03/21/04
Posts: 18721
Loc: Upstate NY
Originally Posted By: 901Memphis
Switch to a 10w30 conventional like PYB and see that lead drop.


This is the 3rd oil change with T6 and this is the first oil change where the lead really shot up.
_________________________
2015 Subaru Forester 2.5 engine/CVT
2015 Ford F250 w/Powerstroke
2016 Subaru Crosstrek CVT (wife's)


Top
#3393427 - 06/09/14 08:36 PM Re: 2001 Jeep GC 4.0 with Rotella T6 5679 miles [Re: Kuato]
Donald Offline


Registered: 03/21/04
Posts: 18721
Loc: Upstate NY
Originally Posted By: Kuato
Tough question, what to do....T6 should be giving great wear but there's obviously something going on within the engine. You could always try replacing the bearings and see what happens.

Shot in the dark? I'd consider calling the reman company, and find out the specifications on the rebuild to insure they used the right sized bearings; if they were too thick, making the clearances too tight, then you might expect heavy wear, at least until they were back to "normal" clearances.


This was a reman not a rebuild. They would have turned the crank and used the proper bearings for a machined crank.
_________________________
2015 Subaru Forester 2.5 engine/CVT
2015 Ford F250 w/Powerstroke
2016 Subaru Crosstrek CVT (wife's)


Top
#3393430 - 06/09/14 08:39 PM Re: 2001 Jeep GC 4.0 with Rotella T6 5679 miles [Re: Donald]
Donald Offline


Registered: 03/21/04
Posts: 18721
Loc: Upstate NY
So if the bearings get loose don't they start squirting more oil on the cylinder walls than the oil rings can handle.

Maybe thats only the rod bearings and a main bearing has the problem.
_________________________
2015 Subaru Forester 2.5 engine/CVT
2015 Ford F250 w/Powerstroke
2016 Subaru Crosstrek CVT (wife's)


Top
#3393476 - 06/09/14 09:18 PM Re: 2001 Jeep GC 4.0 with Rotella T6 5679 miles [Re: NHGUY]
Donald Offline


Registered: 03/21/04
Posts: 18721
Loc: Upstate NY
Originally Posted By: NHGUY
Factory rebuilt? Marshall engine?


Yes a Marshall reman.
_________________________
2015 Subaru Forester 2.5 engine/CVT
2015 Ford F250 w/Powerstroke
2016 Subaru Crosstrek CVT (wife's)


Top
#3393741 - 06/10/14 08:01 AM Re: 2001 Jeep GC 4.0 with Rotella T6 5679 miles [Re: Donald]
dlundblad Offline


Registered: 09/30/13
Posts: 8143
Loc: Midwest
Sorry to see you haven't gotten this issue straightened out Donald. Will the engine manufacturer do anything about this? 60,000 miles is such a shame.

I second the 15w40 trial run, but either way I don't think any oil will make much of a difference.
_________________________
'03 Grand Cherokee 4.0 Castrol Edge HM 10w40-XG16 196k
'02 Volvo S60 2.4T M1 0w40-Mahle OX149D 167k
'97 S Series Blazer 4.3 Delo 15w30-PH3980 130k


Top
#3393754 - 06/10/14 08:13 AM Re: 2001 Jeep GC 4.0 with Rotella T6 5679 miles [Re: Donald]
Donald Offline


Registered: 03/21/04
Posts: 18721
Loc: Upstate NY
So can one assume its just one bearing? How easy would it be to find that bearing? If its a rod or main bearing could just the bearing be replaced or could the crankshaft have an issue which would require machining.
_________________________
2015 Subaru Forester 2.5 engine/CVT
2015 Ford F250 w/Powerstroke
2016 Subaru Crosstrek CVT (wife's)


Top
Page 1 of 2 1 2 >