Recent Topics
Kendall semi-synthetic
by aztec12
02/22/17 06:11 PM
Valvoline VO-16 sliced and diced
by RichardS
02/22/17 05:30 PM
Summer or winter blend for storage?
by another Todd
02/22/17 05:17 PM
Service Pro M2222, 5,000 miles CUT OPEN
by car51
02/22/17 05:17 PM
Gaming rig refresh.
by SEMI_287
02/22/17 05:14 PM
Peak Green vs Zerex Green
by Need4racin
02/22/17 05:07 PM
Need input from everyone - Should I buy this?
by SirTanon
02/22/17 04:58 PM
PARTS PLUS PH-500, 6,000 miles CUT OPEN
by car51
02/22/17 04:55 PM
HASTINGS LF 641 CUT OPEN
by car51
02/22/17 04:45 PM
Is all Dexron VI created equal??
by Aerojoe
02/22/17 04:43 PM
Long term storage
by TurboFiat124
02/22/17 04:36 PM
Mal/Adware Hiding...
by sleddriver
02/22/17 04:28 PM
MC FL-400S, 3,200 miles CUT OPEN
by car51
02/22/17 04:25 PM
Aboutblank?
by Eddie
02/22/17 03:53 PM
Castrol (BP) is reluctant to provide PROOF
by Ed_Flecko
02/22/17 03:16 PM
Castrol magnatec 10w40 duration on chery A5
by Omar_Eltahan
02/22/17 02:58 PM
List of Group V ester-based engine oils
by killahurtz
02/22/17 02:47 PM
Repair or replace
by ram_man
02/22/17 02:39 PM
Silverstars any better than before?
by TurboFiat124
02/22/17 02:39 PM
Pick my oil. Approaching 200k mi in Honda Civic
by Nicasio
02/22/17 02:28 PM
Newest Members
M54B30, killahurtz, K5blazer_383, Mitz, EvelynJane
60611 Registered Users
Who's Online
84 registered (4WD, 89Rustang, 97f150, aquariuscsm, aztec12, 2010Civic, 8 invisible), 2110 Guests and 25 Spiders online.
Key: Admin, Global Mod, Mod
Forum Stats
60611 Members
66 Forums
261431 Topics
4312548 Posts

Max Online: 3590 @ 01/24/17 08:07 PM
Donate to BITOG
Topic Options
#334583 - 03/15/05 09:49 PM Jeep Wrangler 4.0 filter question
saigonsmuggler Offline


Registered: 09/06/03
Posts: 23
Loc: Austin, TX
Folks,

In my 2003 Wrangler, I have been using Motorcraft FL-300 filters. However my local Walmart only has what's left in their inventory right now, which happens to be only Motorcraft FL-1A filters.

Do the FL-300 and FL-1A (both fits my Jeep nicely) have the same bypass valve specs?

Thanks.

Top
#334584 - 03/15/05 09:55 PM Re: Jeep Wrangler 4.0 filter question
Gary Allan Offline


Registered: 09/28/02
Posts: 39806
Loc: Pottstown, PA
I can't say for MC ..but the xref # in Wix are identical for bypass valve specs. [I dont know] wix

Top
#334585 - 03/15/05 10:00 PM Re: Jeep Wrangler 4.0 filter question
brianl703 Offline


Registered: 05/07/04
Posts: 10491
Loc: Manassas, VA
The FL-300 is the replacment for the FL-1A in Mustang 5.0s equipped with an oil cooler.

Top
#334586 - 03/17/05 12:28 PM Re: Jeep Wrangler 4.0 filter question
99 Offline


Registered: 01/10/05
Posts: 631
Loc: SW burbs of Chicago
I use the FL300 (or Purolator L14670) on my 4.0 TJ too. You can use the bigger FL1A on the 4.0 without any problems....lots of guys do. I would, but my 97 has a angled oil filter mount and it's a little tight with the bigger filter on it...you guys with the 00 and up 4.0 TJs have tons of room though. [Cool]

Top
#334587 - 03/17/05 05:44 PM Re: Jeep Wrangler 4.0 filter question
Greaser Offline


Registered: 02/13/03
Posts: 1992
Loc: Windsor,Ontario
quote:
Originally posted by saigonsmuggler:
Folks,

In my 2003 Wrangler, I have been using Motorcraft FL-300 filters. However my local Walmart only has what's left in their inventory right now, which happens to be only Motorcraft FL-1A filters.

Do the FL-300 and FL-1A (both fits my Jeep nicely) have the same bypass valve specs?Yes..8-11 psi...go for it...they are probably cheaper also [Big Grin]

Thanks.


Top
#334588 - 03/17/05 05:45 PM Re: Jeep Wrangler 4.0 filter question
Greaser Offline


Registered: 02/13/03
Posts: 1992
Loc: Windsor,Ontario
What happened there? [LOL!]

Top