Recent Topics
Engine vibrates and idle RPM lowers using window
by Datarock
53 minutes 5 seconds ago
Just accepted a job offer, new interview coming
by PandaBear
Today at 02:28 AM
Good luck, you'll need it.
by DeepFriar
Today at 02:17 AM
Parked car with deflated tires, sidewall damage?
by HKPolice
Today at 12:21 AM
How to clean out a 200k old 1MZ-FE on a Toyota
by zerosoma
Yesterday at 11:59 PM
Replaced Differential fluid today
by barkingspider
Yesterday at 10:24 PM
When did PUP 0w20 get Dexos?
by lukejo
Yesterday at 09:52 PM
Mortgage Lender and the almighty FICO score
by SVTCobra
Yesterday at 09:46 PM
The Bahawalpur tragedy
by Stelth
Yesterday at 09:43 PM
Filter for B&S 724 cc V-Twin
by Astro_Guy
Yesterday at 08:59 PM
diesel engine oil seems to be failing at 5000 mile
by perplexed
Yesterday at 08:58 PM
Shoe sizing?
by Eddie
Yesterday at 08:40 PM
Switching from M1 to Castrol Edge-Both Euro 0W-40
by WhizkidTN
Yesterday at 08:35 PM
Thin or thick: an excerpt from a classic ASTM book
by Gokhan
Yesterday at 08:25 PM
2012 yaris flush?
by macdole99
Yesterday at 08:15 PM
Acid filter fail
by T-Bone
Yesterday at 08:14 PM
5W-30 for longer engine life?
by flinter
Yesterday at 07:38 PM
AutoZone is having a Sale. So prices went up...
by Oro_O
Yesterday at 07:12 PM
01 Tahoe Instrument cluster failing...
by mjk
Yesterday at 06:27 PM
Key fob batteries lasted 15 yrs
by mclasser
Yesterday at 06:02 PM
Newest Members
gwarrior4u, Airbum787, mrj1, Nutch, motorcycler
61995 Registered Users
Who's Online
23 registered (Backwoods41695, ChevyMan93, CDX825, DoubleWasp, Brad_C, carpetguy, 5 invisible), 1008 Guests and 10 Spiders online.
Key: Admin, Global Mod, Mod
Forum Stats
61995 Members
66 Forums
267141 Topics
4418373 Posts

Max Online: 3590 @ 01/24/17 08:07 PM
Donate to BITOG
Page 1 of 6 1 2 3 4 5 6 >
Topic Options
#3228426 - 12/26/13 03:44 PM I need a single bolt. How hard can it be?
gr8gatzby Offline


Registered: 11/22/05
Posts: 603
Loc: Charlotte, NC
I need a single trans pan bolt. Ford part #N605904-SA. Not sold at AZ/AA/O'Reily. This bolt, in a package of two can be found cheap online($2.50), but then shipping adds $11-$14 to the bill. The Ford dealer wants $8 per bolt. Anyone with an alternative solution here?


Edited by gr8gatzby (12/26/13 03:45 PM)
_________________________
'95 Ford F150 | 4x4 | 5.8 | 9MPG
'11 Honda Crosstour | AWD | 3.5 | 21MPG

Top
#3228428 - 12/26/13 03:46 PM Re: I need a single bolt. How hard can it be? [Re: gr8gatzby]
GutsyGecko Offline


Registered: 08/16/12
Posts: 426
Loc: Youngstown, OH
Hardware store? Get the threads and some washers.

Top
#3228430 - 12/26/13 03:47 PM Re: I need a single bolt. How hard can it be? [Re: gr8gatzby]
Rouphis Offline


Registered: 01/31/09
Posts: 43
Loc: Tampa, Fl
Junkyard?

-Rouphis

Top
#3228431 - 12/26/13 03:47 PM Re: I need a single bolt. How hard can it be? [Re: gr8gatzby]
beast3300 Offline


Registered: 12/24/09
Posts: 3146
Loc: Ohio
If you know the length and type (thread pitch, etc) then walk into the Zone and get a bolt. Or go to a local garage and ask for a bolt (giving the exact kind you need (thread pitch, diameter, length.)) Anybody wrenching on cars has a "junk drawer" or bin of some kind with stuff like that in there.


Edited by beast3300 (12/26/13 03:49 PM)
Edit Reason: grammar
_________________________
'03 Regal GS L67: PP 5w30/FU3980

'99 Grand Prix L36: QS HM 5w30/STP 3387A E-core, Filtermag

'07 LaCrosse L26: PG 5w30/ProSelect 21040

ASE L1 MT


Top
#3228443 - 12/26/13 04:01 PM Re: I need a single bolt. How hard can it be? [Re: gr8gatzby]
Chris142 Offline


Registered: 06/05/03
Posts: 15205
Loc: apple valley, ca
Something like a trans pan bolt does not need to be anything special. As long as it threads in and isnt too long its fine.the dealer would be the last place id look. Id go to osh or home depo first.
_________________________
02 Wrangler super-s 10w30
87 F250 proline 15w40
04 Tahoe super-s 5w30
Z400 Lucas 10w30
KLR250 Maxima 10w40
Can am maveric edge 5w40

Top
#3228452 - 12/26/13 04:10 PM Re: I need a single bolt. How hard can it be? [Re: gr8gatzby]
Kuato Offline


Registered: 10/23/05
Posts: 6469
Loc: Colorado
$8 a pop at the stealership...are they aircraft grade and made of gold?


Oh and weren't the same answers in your first post about this? hornets
_________________________
Oil condition is speculation until a UOA is performed.

2013 F150 5.0 4x4 SuperCab 63k on Amsoil

Thick vs Thin test: 6k / 43k miles complete


Top
#3228470 - 12/26/13 04:32 PM Re: I need a single bolt. How hard can it be? [Re: gr8gatzby]
bdcardinal Offline


Registered: 06/03/05
Posts: 9830
Loc: Santa Barbara, CA
They are probably charging you for the pack. The dealer has to order them in quantities of 2, and since it is special order, you are getting the bag of 2. Those bolts are $4.11 each, hence the $8.22 plus tax for 2 bolts.

dimensions are M8 x 1.25 x 19.
_________________________
2014 Ford Mustang GT Track Pack
1995 Ford Mustang GT

Ford/Mazda Parts Counter
NRA Benefactor Member
Opinions expressed are my own.

Top
#3228477 - 12/26/13 04:41 PM Re: I need a single bolt. How hard can it be? [Re: gr8gatzby]
CHARLIEBRONSON21 Offline


Registered: 08/28/13
Posts: 659
Loc: MEMPHIS, TN
Scour the local parking lots for your model year? Or try Wally World and their order a part service...
_________________________
'13 Fusion Hybrid: 5w20 PUP/FU
'15 Civic Si: 0W20 PPPP/FU
'16 Fusion Hybrid: FF
'14 Odyssey: 0w20 PUP/FU
'93 Civic: 5W30 M1/TG
'99 SVT Cobra: 5W30 M1/FU

Top
#3228487 - 12/26/13 04:56 PM Re: I need a single bolt. How hard can it be? [Re: gr8gatzby]
dparm Offline


Registered: 04/19/10
Posts: 13111
Loc: Chicago, IL
McMaster-Carr
_________________________
2011 BMW M3 sedan ZCP -- FOR SALE!!
2017 Chevrolet Corvette Grand Sport

Top
#3228491 - 12/26/13 04:58 PM Re: I need a single bolt. How hard can it be? [Re: CHARLIEBRONSON21]
kschachn Offline


Registered: 12/26/05
Posts: 7589
Loc: Upper Midwest
LMAO. I can state from personal experience (a long time ago) that this is not a good idea, at least for wheel covers.

Originally Posted By: CHARLIEBRONSON21
Scour the local parking lots for your model year? Or try Wally World and their order a part service...
_________________________
1994 BMW 530i, 215K
1996 Honda Accord, 234K
1999 Toyota Sienna, 369K
2000 Toyota ECHO, 262K

Top
#3228494 - 12/26/13 05:02 PM Re: I need a single bolt. How hard can it be? [Re: gr8gatzby]
Dufus2 Offline


Registered: 12/12/13
Posts: 259
Loc: Virginia
You should be able to get any bolt 8x1x1.25 with a flat washer like others said. Most tranny pan bolts have a flange washer and possibly a tooth pattern on the washer. For an OEM bolt, salvage is your best bet.
_________________________
ASE Certified in Med/Heavy Truck Service including A9
Heavy Equipment Repair, Fleet Maintenance
Real Cars Rattle and Smoke a Little

Top
#3228498 - 12/26/13 05:08 PM Re: I need a single bolt. How hard can it be? [Re: gr8gatzby]
edwardh1 Offline


Registered: 01/17/03
Posts: 2656
Loc: Coastal South Carolina
any good hardware store should have it - a hardware store not a garden center.
our ace hardware has all that stuff + metric. or a u pick salvage yard


Edited by edwardh1 (12/26/13 05:08 PM)
_________________________
Prius?
In line water heater?
Solar?
All save energy, but may not save money (complicated, no DIY, parts hard to get, parts expensive). You decide.

Top
#3228528 - 12/26/13 05:45 PM Re: I need a single bolt. How hard can it be? [Re: gr8gatzby]
stephen9666 Offline


Registered: 12/08/06
Posts: 3394
Loc: USA
As mentioned, a generic bolt like a trans pan bolt will be available at any decent hardware store.

Home Depot has a terrible selection of bulk hardware, so skip them. They never have what I need, but my local ACE Hardware generally does have the single nuts/bolts I need.

Top
#3228548 - 12/26/13 06:10 PM Re: I need a single bolt. How hard can it be? [Re: gr8gatzby]
tc1446 Offline


Registered: 12/10/10
Posts: 828
Loc: Lexington, NC
Take one of the bolts to Lowes or Napa and they will match it.
_________________________
'13 Accord EX-L (73K) M1 & FU
'00 Ford Ranger {62K} M1 & FU
'16.5 Polaris Slingshot(12K) M1 & ACDelco (Ecotec motor)

Top
#3228551 - 12/26/13 06:14 PM Re: I need a single bolt. How hard can it be? [Re: gr8gatzby]
Roadkingnc Offline


Registered: 07/16/11
Posts: 724
Loc: NC USA
Go to Lowes or a hardware store, 8x1.25x15mm should work, put a flat washer under it.

Top
Page 1 of 6 1 2 3 4 5 6 >