Cav 796 adapters to spin-on

Status
Not open for further replies.
Joined
Nov 3, 2012
Messages
7
Location
Pa
Let me start by saying i hope i put this is the proper category.

I have a Massey Ferguson 255 tractor with a Cav 796 filter setup. Im not fond of the glass bowls on the filters, very fragile. Ive been looking at some of the spin on adapters but only one has the sediment bowls. Here are two i found that i like:

1) http://www.asap-supplies.com/green/racor...sion-kit-301050

1) This one uses Parker/Racor filters 16x1.5mm thread that have the spin on filter and a sediment/water bowl. When i cross the filter element it comes up with a BF790 but this one has no bowl is there another filter that would have a bowl that would work?

2) http://www.asap-supplies.com/brands/perk...-filters-302040

2) This one is a whole base replacement which is nice but again no sediment/water bowl. This uses a standard thread size also for the filter. is there a filter with bowl that would work here?

What are your guys thoughts and opinions?
 
Status
Not open for further replies.
Back
Top