Recent Topics
Dry scratchy throat remedies ?
by Mr Nice
02/20/17 09:12 AM
Swirl marks
by Indy
02/20/17 09:11 AM
GM Diff Lubricant vs The World
by Gasbuggy
02/20/17 08:17 AM
Broken bolts on oil boiler burner
by madRiver
02/20/17 07:56 AM
Priming oil pump
by supton
02/20/17 07:55 AM
change to high milage syn oil at 117,000 on '96 I4
by fred9xx
02/20/17 07:41 AM
Castrol Edge 5w50 ... What could I do with it
by Miller88
02/20/17 07:04 AM
Engine Swap
by bandz7
02/20/17 05:29 AM
SnapOn Line Wrench
by George7941
02/20/17 01:11 AM
Be your own chauffeur for 10 cents on the dollar
by OneEyeJack
02/20/17 12:39 AM
looking for a crusier
by bowlofturtle
02/20/17 12:16 AM
Two month mini-review of my MacBook Pro
by redhat
02/20/17 12:06 AM
Redline 5W-40 vs 5W-30 for 2014 Infiniti Q50 3.7
by Patrick_C
02/19/17 11:39 PM
Do you think Toyota is on to something?
by OneEyeJack
02/19/17 11:17 PM
Is this Vinyl siding crack dangerous?
by maverickfhs
02/19/17 09:56 PM
Thoughts on MS HM and M1 HM
by car51
02/19/17 09:27 PM
E85 affects on Oil
by Mathew_Boss
02/19/17 09:27 PM
Why would anyone use 10w-30 when 5w-30 same price?
by EscapeVelocity
02/19/17 08:52 PM
540 Rat Blog - QSUD better than Mobil 1
by CapitalTruck
02/19/17 07:53 PM
Recommendations for atf fluid in '02 Focus ZX5.
by D Hill
02/19/17 07:51 PM
Newest Members
serversurfer, creol, sailor15015, 6_7Powerstroke, Kstet96
60577 Registered Users
Who's Online
105 registered (afree, 2015_PSD, 4WD, 87sammy, 2004tdigls, AandPDan, 8 invisible), 1948 Guests and 16 Spiders online.
Key: Admin, Global Mod, Mod
Forum Stats
60577 Members
66 Forums
261298 Topics
4310296 Posts

Max Online: 3590 @ 01/24/17 08:07 PM
Donate to BITOG
Page 1 of 21 1 2 3 ... 20 21 >
Topic Options
#3007366 - 05/20/13 07:45 AM What does Liqui-Moly CERATEC do?
TechnoLoGs Offline


Registered: 04/03/13
Posts: 2606
Loc: Call it NNJ
I know people love the MOS2 additive can, but I also saw this on amazon.com..

http://www.amazon.com/Liqui-Moly-Cera-Te...ui-moly+ceratec

Any use or benefit to it?
_________________________
1993 Chevrolet S-10 Blazer 4.3, the Frankenblazer - 184,440mi. 10/22/13 - WPP Supertech 10W-40
12,359 10/22 12,361 10/23 12,365 10/24 12,369 10/25

Top
#3007373 - 05/20/13 07:52 AM Re: What does Liqui-Moly CERATEC do? [Re: TechnoLoGs]
Bill in Utah Offline



Registered: 11/11/02
Posts: 12837
Loc: UT
Just say no.

Not needed and all its purpose is to separate your $$$ from you.

Bill

Top
#3007449 - 05/20/13 09:48 AM Re: What does Liqui-Moly CERATEC do? [Re: Bill in Utah]
Doog Offline


Registered: 10/24/11
Posts: 6160
Loc: North Coast
Originally Posted By: Bill in Utah
Just say no.

Not needed and all its purpose is to separate your $$$ from you.

Bill


+1 Yeah what he said ^^^^ Coffee
_________________________
The difference between a beer and your opinion is that I asked for a beer... well except for just now..Coffee2

Top
#3007506 - 05/20/13 10:43 AM Re: What does Liqui-Moly CERATEC do? [Re: TechnoLoGs]
TurboJim Offline


Registered: 10/30/04
Posts: 830
Loc: Oregon
Liqui Moly MOS2 & Ceratec are both available at NAPA. Some have reported their engines run smoother and quieter with these products.

Top
#3007650 - 05/20/13 12:35 PM Re: What does Liqui-Moly CERATEC do? [Re: TechnoLoGs]
NMBurb02 Offline


Registered: 09/12/12
Posts: 1974
Loc: Greatest Earth on Show
_________________________
2002 Chevy Suburban 1500, Rotella T6 5W-40, Fram TG3675
2006 Pontiac Grand Prix GT, Napa Syn 5W-30, Fram TG3387A

Top
#3007907 - 05/20/13 04:35 PM Re: What does Liqui-Moly CERATEC do? [Re: TurboJim]
dailydriver Offline


Registered: 03/14/06
Posts: 8752
Loc: Bucks County, Pa.
Originally Posted By: TurboJim
Liqui Moly MOS2 & Ceratec are both available at NAPA. Some have reported their engines run smoother and quieter with these products.


Are you sure about them being able to order in the Ceratec???

I have NEVER seen it available in their catalog under the Liqui Moly/Lubro Moly section. shrug
_________________________
2000 Z28 1SC 6 speed 180K miles
4L Motul 300V 0W-40, 2L Motul 300V 0W-20
M1-206 oil filter
Motul Gear 300 75W-90
Red Line D4/MTL in the T56

Top
#3008168 - 05/20/13 08:39 PM Re: What does Liqui-Moly CERATEC do? [Re: dailydriver]
TurboJim Offline


Registered: 10/30/04
Posts: 830
Loc: Oregon
Originally Posted By: dailydriver
Originally Posted By: TurboJim
Liqui Moly MOS2 & Ceratec are both available at NAPA. Some have reported their engines run smoother and quieter with these products.


Are you sure about them being able to order in the Ceratec???

I have NEVER seen it available in their catalog under the Liqui Moly/Lubro Moly section. shrug


They have Ceratec displayed on the counter at my NAPA.

Top
#3008207 - 05/20/13 09:18 PM Re: What does Liqui-Moly CERATEC do? [Re: TechnoLoGs]
Clevy Offline


Registered: 11/11/10
Posts: 9782
Loc: Saskatoon canada
Cera-tec is the ultimate additive.
It works the same as mos2 however it uses nano particles of ceramic to create the barrier and the layer is so hard you need a belt sander to grind it off. I have 6 cans of it and will only use it in a newer engine because its so hard to find.
That is the greatest additive on earth. I love the stuff.
It's better than mos2 and lasts 10 times as long between treatments.
_________________________
2006 Charger RT
Miles x 2 per oil filter

Top
#3008292 - 05/20/13 10:58 PM Re: What does Liqui-Moly CERATEC do? [Re: Clevy]
TurboJim Offline


Registered: 10/30/04
Posts: 830
Loc: Oregon
Originally Posted By: Clevy
It's better than mos2 and lasts 10 times as long between treatments.


How often do you use it? Are you using the entire can per treatment?

Top
#3008624 - 05/21/13 10:05 AM Re: What does Liqui-Moly CERATEC do? [Re: Clevy]
Vikas Online   content


Registered: 07/22/05
Posts: 10863
Loc: NorthEast
Originally Posted By: Clevy
Cera-tec is the ultimate additive.
It works the same as mos2 however it uses nano particles of ceramic to create the barrier and the layer is so hard you need a belt sander to grind it off. I have 6 cans of it and will only use it in a newer engine because its so hard to find.
That is the greatest additive on earth. I love the stuff.
It's better than mos2 and lasts 10 times as long between treatments.

I am not sure if you are serious or playing a joke on us. Most of your replies have been logical and very helpful, so I am having hard time believing with this reply.

I would like to know why ceramic is better than micro particles of sand in the oil. How about crushed diamonds in the oil? Ceramic would be the last thing that I want in my oil.

Top
#3009519 - 05/22/13 09:37 AM Re: What does Liqui-Moly CERATEC do? [Re: NMBurb02]
147_Grain Offline


Registered: 03/11/13
Posts: 1944
Loc: USA


Thanks, NMBurb02! smile


CERA-TEC
Motor oil additive
With high-tech ceramic anti-wear protection

How does CERA-TEC work?

The graphite-like structure of the ceramic particles enables them to fill in the roughness present in the metal, thereby preventing direct metal-on-metal contact. An active chemical (friction modifier) utilizes the existing friction energy to ensure flowing i.e. non-abrasive – smoothing, annealing the friction and bearing points.

CERA-TEC is a suspension based on a micro-ceramic solid lubricant and chemical active agents in mineral oil. This combination reduces friction and protects the engine and transmission against wear. This in turn prevents expensive repairs and prolongs the life of the assemblies.

CERA-TEC offers high mechanical and thermal stability, ensuring outstanding lubrication even under the toughest conditions. Engine and transmission noise are reduced. It saves energy, reduces fuel consumption and thus also pollutant emissions.

CERA-TEC reacts directly with the surface of the metal and protects your engine for up to 50,000 kilometers - even with the oil being changed during that period.

Properties of CERA-TEC:

CERA-TEC is self-mixing and compatible with all standard motor oils. It is ideal for use in oil-lubricated transmissions, pumps and compressors. Also tested for vehicles with turbochargers, catalytic converters or particle filters. In new vehicles, CERA TEC supports engine break-in and protects against excessive wear. With a particle size of only 0.2 μm, it is absolutely compatible with all filters. Do not use in automatic transmissions and motorbikes with a wet clutch!

How is CERA-TEC applied?

- direct addition to the motor or transmission oil (cold or warm)
- ideally, pour in together with fresh oil when changing the oil
- otherwise apply when there is at least 5,000 km to go before the next oil change so that CERA TEC has plenty of time in which to have an effect

- 300 ml is sufficient for up to 5 liters of motor oil
- the optimal dosage is about 6 % of the total oil fill quantity
- oil change intervals as per the service documents of the vehicle to be followed

Test arrangement image with two interlocking gear wheels.

Who is APL?

Formed in 1989, APL is a neutral and independent, internationally renowned development service provider,
working for a worldwide client base from the automobile, oil and additives industries. The company is specialized in the mechanics of engine and drive trains and their operating supplies. On nearly 145 state of the art engine and component test rigs, more than 700 employees apply the latest measurement technology.

What was tested?

The APL experts determined the relative scuffing load capacity of lubrication oils. Between the edges of the teeth, rolling off and sliding occur at the same time. Due to unfavorable operating conditions the lubricant film can break down between the tooth edges. This leads to short-term local fusion and disintegration of the edges, so-called scuffing, which causes damage to the smooth surface of the teeth edges. Possible consequences: higher engine and transmission noise until failure of the gear wheels occurs.

Test sequence

On the vehicle distortion test bench the test oil was mixed with 6 per cent CERA TEC. With each test sequence the weight, and thereby the force level, on the sensitive transmission gear wheels was increased. The aim of the experiment is to reach the damage force level. This level is reached when the sum of all damage caused to the teeth of the gear wheels is more than 20 millimeters. The test is then ended. The reference oil came up to damage force level 4; the oil mixed with CERA TEC reached as far as level 9, hence to more than double the level. CERA TEC markedly increases the power reserve, which confirms the anti-wear protection by the fine ceramic particles, is how Dipl.-Ing.

Peter Kunz, who supervised the test, summarizes the results. Kunz’s initial skepticism gave way: After the tests I was amazed. The product has made everything, and I really mean everything, better.

Just the demand for APL’s expertise alone has been unusual. LIQUI-MOLY is the first company in the after-sales market that has been prepared to undergo voluntary tests», said Kunz. He is responsible for the testing of lubricants and fuels.

In short: CERA-TEC reduces the amount of friction and thereby the wear. This in turn benefits the engine, which is under less load. This can result in a lower susceptibility to repair and longer service life.

Top
#3009543 - 05/22/13 09:53 AM Re: What does Liqui-Moly CERATEC do? [Re: TechnoLoGs]
BearZDefect Offline


Registered: 08/15/05
Posts: 2177
Loc: Lexington, KY
"annealing the friction and bearing points" ?

Really?

I do not mean this question as a knock to the product, but the claim I quoted above sounds suspicious to me. Perhaps the writer doesn't know what anneal means to metalworking, and simply used the word to impress others who don't know either and won't bother to look it up. Or perhaps I have no idea what it means in this context. LOL

Top
#3009784 - 05/22/13 01:01 PM Re: What does Liqui-Moly CERATEC do? [Re: TechnoLoGs]
Vikas Online   content


Registered: 07/22/05
Posts: 10863
Loc: NorthEast
Ceramic is like graphite? I must have been asleep when they taught some chemistry courses during my engineering school!

Top
#3010552 - 05/23/13 05:12 AM Re: What does Liqui-Moly CERATEC do? [Re: Vikas]
demarpaint Offline


Registered: 07/03/05
Posts: 26788
Loc: NY
Originally Posted By: Vikas
Ceramic is like graphite? I must have been asleep when they taught some chemistry courses during my engineering school!


IIRC The Ceramic they are using in CERATEC is a better lube than graphite.
_________________________
God Bless Our Troops


Top
#3010663 - 05/23/13 07:47 AM Re: What does Liqui-Moly CERATEC do? [Re: TechnoLoGs]
Vikas Online   content


Registered: 07/22/05
Posts: 10863
Loc: NorthEast
I am asking some chemical hotshot to explain it me. I understand that at molecular structure, even though they are both carbon forms, I would not use crushed diamonds for lubrication instead of graphite.

In my mind, ceramic is more like crushed diamonds or crushed sand than graphite. Even the ceramic wiki page has no "lubrication" word in it.

I feel the same way about Titanium too.

Top
Page 1 of 21 1 2 3 ... 20 21 >