This is my first UOA, so please bear with me. My car is an 03 Honda Civic Si with approx. 10,000 miles on it at the time of the oil change. I have a higher redline than stock, use only 93 octane gas, and have an aftermarket CAI that was on the car for about half of the OCI. The UOA was done by Schaeffer.
Cu 2
Fe 10
Cr 0
Al 6
Pb 1
Mb 100
P 1254
Zn 1355
Mg 36
Ca 3164
Antifreeze 0.0
Fuel No
Water 0.2% (only abnormal number)
Si 8
Viscosity 10.38 (lists as 30W)
Sulfer 0%
Oxidation 29%
Nitration 6%
I use my car for either short trips (5-15 minutes in the city) or for long distance driving. I used about 1.5qts of oil during that time.
I'm currently running GC and haven't noticed any oil usage yet.
Cu 2
Fe 10
Cr 0
Al 6
Pb 1
Mb 100
P 1254
Zn 1355
Mg 36
Ca 3164
Antifreeze 0.0
Fuel No
Water 0.2% (only abnormal number)
Si 8
Viscosity 10.38 (lists as 30W)
Sulfer 0%
Oxidation 29%
Nitration 6%
I use my car for either short trips (5-15 minutes in the city) or for long distance driving. I used about 1.5qts of oil during that time.
I'm currently running GC and haven't noticed any oil usage yet.